Juniper Slim Pedestal Bracket Installation Guide
- September 4, 2024
- JUNIPer
Table of Contents
Juniper Slim Pedestal Bracket
Product Information
Specifications
- Product Name: Slim Pedestal Bracket
- Mounting Type: Under-Surface Mounting
- Installation Guide: General Installation Guide
Product Usage Instructions
Mounting Bracket
-
Align Brackets with Pedestal Top:
Place brackets on top of the pedestal and align flush with all top edges of the pedestal. -
Mark Hole Positions:
Once brackets are aligned, mark each hole position with a marker. Remove brackets and drill 7mm holes at each marked location.
Angled Post Legs
-
Connect Brackets to Pedestal:
Remove drawers from the pedestal and align two brackets with pre-drilled holes on top. Insert provided screws from inside up through the top of the pedestal, and secure with nuts. -
Connect Unit to Workstation:
Align the pedestal to the desired position underneath the work surface and secure it with provided wood screws. Note that the desk’s center beam will run between two pedestal brackets.
FAQ
Q: Can I use this bracket for a standing desk?
A: The slim pedestal bracket is designed for under-surface mounting and may
not be suitable for a standing desk setup. It is recommended for standard
desks.
OVERVIEW
MOUNTING BRACKET
-
Align Brackets with Pedestal Top
Place brackets on top of the pedestal and align flush with all top edges of the pedestal -
Mark Hole Positions
Once brackets are aligned, mark each hole position with a marker. Remove brackets and drill 7mm holes at each marked location, -
Connect Brackets to Pedestal
Remove drawers from the pedestal and align two brackets with pre-drilled holes on top. Insert provided screws from inside up through top of the pedestal, and secure with nuts. -
Connect Unit to Workstation
Align the pedestal to the desired position underneath the work surface, and secure with provided wood screws.
NOTE : The desk’s center beam will run between two pedestal brackets.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>