Juniper TH-3 Standing Height Collaboration Table Installation Guide
- September 4, 2024
- JUNIPer
Table of Contents
Juniper TH-3 Standing Height Collaboration Table
Product Specifications
- Product Name: TH-3 Standing-Height Collaboration Table
- Includes Add-Ons: A1 General Installation Guide
Product Usage Instructions
Collaboration Table Assembly
- Add Hardware into Side Panels: Requires 4 wooden dowels, 2 cam locks, and 3 cam pins. Repeat for both panels.
- Add Hardware to Modesty Panel: Requires 6 cam locks.
- Add Hardware to Top Panel: Requires 10 cam pins.
- Connect Side Panels to Modesty Panel: Align cam pins on side panels with open cam locks on modesty panel. Turn cam locks with a screwdriver to lock cam pins in place.
- Connect Top Panel: Lower top panel onto the rest of the assembly. Align cam pins on the top panel with open cam locks on the modesty panel and side panels. Turn cam locks with a screwdriver to lock cam pins in place. Place cam lock covers over cam locks for a polished look.
- Insert Grommet: Insert the grommet.
Optional Power Module Installation
- Attach Metal Clips and Insert into Surface: Attach 2 metal clips to the back of the module base, then insert into pre-cut holes in the surface.
- Secure Module into Place: Insert plastic clamps into holes on the bottom of the module. Rotate and then push against the surface to clamp the module into place.
- Power Management J-Clips: Remove adhesive tape and stick J-clip to a clean, dry surface. Insert 1 wood screw through J-clip and into the laminate panel for additional security.
Frequently Asked Questions
-
Q: What additional parts are needed for multiple collaboration tables?
A: Additional parts will be needed for each additional collaboration table, as listed in the Parts List section of the manual. -
Q: Can the power module be installed on any surface?
A: The power module should be inserted into pre-cut holes in the surface for proper installation.
Standing-Height
Collaboration Table
Includes Add-Ons: A1
General Installation Guide
Collaboration Table Overview
Standing-Height Collaboration Table All parts listed are for a collaboration
table; additional parts will be needed for additional collaboration tables.
Parts List
| Code | Qty. | Description |
|---|---|---|
| Kit-CPT424 | 1 | Top Panel |
| 2 | Side Panels |
1
| Modesty Panel|
CNWG| 1| In-Surface Grommet|
Add Hardware into Side Panels
Requires 4 wooden dowels, 2 cam locks, and 3 cam pins. Repeat for both panels.
Add Hardware to Modesty Panel
Requires 6 cam locks
Add Hardware to Top Panel
Requires 10 cam pins.
Connect Side Panels to Modesty Panel
Align cam pins on side panels with open cam locks on modesty panel. Turn cam
locks with a screwdriver to lock cam pins in place.
Connect Top Panel
Lower top panel onto rest of assembly. Align cam pins on top panel with open cam locks on modesty panel and side panels. Turn cam locks with a screwdriver to lock cam pins in place. Place cam lock covers over cam locks for a polished look.
Insert Grommet
A1: Power Module
Overview
Standing-Height Collaboration Table All parts listed are for a power module; additional parts will be needed for additional power modules.
Parts List
| Code | Qty. | Description |
|---|---|---|
| BPCONF2v2 or BPCONF3 |
1
| In-Surface Power Module|
JC1| 5| J-Clips|
Attach Metal Clips and Insert into Surface
Attach 2 metal clips to back of module base, then insert into pre-cut holes
in surface.
Secure Module into Place
Insert plastic clamps into holes on bottom of module. Rotate and then push
against surface to clamp module into place.
Power Management J-Clips
Remove adhesive tape and stick j-clip to a clean, dry surface. Insert 1 wood
screw through j-clip and into laminate panel for additional security.
1-866-999-0955 |
hello@juniperoffice.com |
juniperoffice.com
© 2023 Juniper Office | Version 23.0.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>