enabling devices 1019 Flexible Arm Assistive Switch User Guide
- September 4, 2024
- enabling devices
Table of Contents
enabling devices 1019 Flexible Arm Assistive Switch
We’ve added our popular Gumball & Head switches to our Easy Flex Mount. Bend the flexible arm and position the switch anywhere. Easily clamps to any wheelchair, tray, tabletop, highchair or stroller. Size: 20″L. Weight: 1 lb.
OVERVIEW
Operation
- Attach the clamp to your mounting surface by first turning the clamp and adjusting the knob clockwise to loosen. Turn counter clockwise to tighten, do not over-tighten or you will damage the clamp. Once the Flex Arm is mounted you will want to adjust the position of the arm for the best placement. Gently bend the arm to the desired position. To fine-tune your placement of the switch.
- Plug the switch into the jack on your switch-adapted toy/device.
- If you must use an adapter, make sure that you use a MONO adapter, not a STEREO adapter.
- Make sure that the connection between the switch and your toy/device is plugged in all the way. There should be no gaps.
- Simply press anywhere on the switch’s top to activate your toy/device.
- The toy/device will only remain activated while switch continues to be actuated. Once you release the switch, the toy/device will turn off.
Troubleshooting
- Problem : The switch does not activate your toy/device.
- Action #1 : Make sure that the connection between the switch and your toy/device is plugged in all the way. There should be no gaps. This is a common error and an easy fix.
- Action #2 : Try a different switch with your toy/device to rule out the toy/device as the source of the problem.
- Action #3 : Try a different adapter (if applicable) to rule this out as the source of the problem.
Care of Unit:
- The Gumball & Head switch on Easy Flex Mount can be wiped clean with any household multi-purpose cleaner and disinfectant. We recommend Simple Green, which is a non toxic biodegradable all-purpose cleaner.
- Do not submerge the unit, as it will damage the contents and the electrical components.
- Do not use abrasive cleaners, as they will scratch the surface of the unit.
Gumball Switch on Easy Flex Mount #1015 Head Switch on Easy Flex Mount #1019
Specifications
| Size | 20″L |
|---|---|
| Weight | 1 lb |
FAQ
What is the size and weight of the Easy Flex Mount?
The Easy Flex Mount is 20 inches long and weighs 1 lb.Can I use any adapter with the switch?
No, you should use a MONO adapter, not a STEREO adapter.How do I clean the Gumball & Head switch on Easy Flex Mount?
You can wipe it clean with any household multi-purpose cleaner and disinfectant. Do not submerge the unit or use abrasive cleaners.What should I do if the switch does not activate my toy/device?
Ensure the connection is plugged in all the way with no gaps, try a different switch, or use a different adapter if applicable.Contact Information
For Technical Support: Call our Technical Service Department Monday through
Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>