KARTENT Fold-out bed Durable Cardboard Owner’s Manual
- September 4, 2024
- KARTENT
Table of Contents
- Fold-out bed Durable Cardboard
- Specifications:
- Product Usage Instructions:
- 1. Parts Check:
- 2. Frame Assembly:
- 3. Assembly of Part A:
- 4. Assembly of Part B:
- 5. Final Assembly:
- 6. Additional Steps for Beds Wider than 90cm:
- 7. Optional Steps:
- Q: Are all parts necessary for assembly?
- Q: Can I get instructions in a different language?
Fold-out bed Durable Cardboard
“`html
Specifications:
- Available sizes: 70 cm, 80 cm, 90 cm, 140 cm, 160 cm, 180
cm
Product Usage Instructions:
1. Parts Check:
Check that you have all the parts. The edge B, top C, and the
connector D are optional.
2. Frame Assembly:
The frame consists of 4 parts. The front and rear parts (A) are
the same and are connected to the middle parts (B). See the
provided image for an overview.
3. Assembly of Part A:
-
Lay out 2 pieces of bed A with the incisions facing up.
-
Fold 2 pieces mirrored over one of the inner incisions and
apply a fold line. -
Attach the folded parts to the laid-out pieces as shown to
complete Part A.
4. Assembly of Part B:
-
Lay out 2 bed pieces A as shown with the incisions facing
up. -
Add 2 pieces over the laid-out pieces as shown to complete Part
B.
5. Final Assembly:
-
Attach the 2 parts A and the 2 parts B together by sliding the
slots together. -
Check that the frame looks correct from above.
6. Additional Steps for Beds Wider than 90cm:
-
Repeat steps 1 to 9 for both beds and place them next to each
other. -
Fold the connectors as instructed and slide them into
place. -
Slide the other bed over the connectors.
7. Optional Steps:
-
Fold the flaps of leg B inwards.
-
Attach the frame to the sides B using the slots on both
sides. -
Fold the flaps of side B inwards and slide into the frame.
-
Fold the flaps from top face C inwards and place it on the
frame to complete the fold-out bed.
FAQ:
Q: Are all parts necessary for assembly?
A: No, some parts like edge B, top C, and connector D are
optional depending on your desired configuration.
Q: Can I get instructions in a different language?
A: Yes, you can find instructions in different languages at
www.KarTent.com/instructions
“`
Fold-out bed
70 cm 80 cm 90 cm 140 cm 160 cm 180 cm
What’s in the box?
A
16x Bedframe 16x Bedframe 16x Bedframe 32x Bedframe 32x Bedframe 32x Bedframe
B (Optional)
2x Side
C (Optional)
4x Top
D (Optional)
2x Side 4x Top
2x Side 4x Top
2x Side 8x Top 2x Connecting piece
2x Side 8x Top 2x Connecting piece
2x Side 8x Top 2x Connecting piece
16-32x
A
2x
B
4-8x
C
2x
D
Check that you have all the parts Have. The edge B, top C and the
connector D are optional.
A
A
The frame consists of 4 parts. The
front and rear parts (A) are the same, and are connected to the
middle parts (B). See image for the
overview.
3. Lay out 2 pieces of bed A as shown, with the incisions facing up.
4. Fold 2 pieces mirrored over 1 of the 2 inner incisions. Apply a fold line yourself.
5. Attach the folded parts to the laid out pieces as shown. Part A is now finished.
6. To make part B, lay out 2 bed pieces A as shown, with the incisions facing up.
Prefer instructions in a different language? Check www.KarTent.com/instructions
Add 2 pieces over the laid out pieces as shown. Part B is now
finished.
A B
B A
8. Now attach the 2 parts A and the 2 parts B to each other by sliding the slots together.
9. The frame should now look something like this from above. If this is incorrect, check that your parts A and B are correct.
Steps 10 to 13 are only for beds wider than 90cm Repeat steps 1 to 9 and place the 2 beds next to each other.
11. Fold the connectors as above.
12. Slide the connectors into the rear bunk
13. Then slide the other bed over the connectors.
Prefer instructions in a different language? Check www.KarTent.com/instructions
2x
14. Steps 14 to 18 are optional. Fold the flaps of leg B inwards.
2x
15. Attach the frame to the sides B. Make use of the slots. Do this on both
sides.
2x
16. Fold the flaps of side B inwards and slide into the frame.
17. Fold the flaps from top of face C inwards.
18. Finally, place the top surface C on the frame and the fold-out bed is finished!
Prefer instructions in a different language? Check www.KarTent.com/instructions