HOMCOM 835-705V00 3-Shelf Kitchen Pantry Storage Cabinet Instruction Manual

HOMCOM 835-705V00 3-Shelf Kitchen Pantry Storage Cabinet

Product Specifications

• Model: IN220901364V03_GL
• Part Number: 835-705V00
• Screw Types: Various sizes including M6, M4, M3.5, M3

Maintenance:

Regularly check the tightness of screws and bolts to ensure stability. Clean the product with a soft cloth to remove dust or debris.

Frequently Asked Questions

Q: Can I use different screws than the ones provided?

A: It is recommended to use only the specified screws provided with the product to ensure proper fit and stability.

Q: What is the purpose of the anti-dumping belt mentioned in the manual?

A: The anti-dumping belt is designed to secure the product to the wall for added safety and can be used based on your needs and preferences.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center, Our contact details are below:

Country
US

Phone
001-877-644-9366

Email
customerservice@aosom.com

PRE-FIX DRAWER RUNNER INSTRUCTIONS

NOTE: Pull inner and outer drawer runners apart before fixing them to panels.

Slide drawer runners apart until the drawer lock can be seen, as shown.

Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.

Your inner and outer drawer runners are ready to be fixed to panels.

USING CAM LOCK AND QUICKFIT

QUICKFIT: Tighten quickfit until shoulder is flush with panel.Do not overtighten or undertighten.

CAM LOCK: When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.

Quickfit head should be in the centre of the cam lock when the two panels are joined.
Turn cam lock clockwise to tighten.

HINGE ADJUSTMENT GUIDE

lt may be necessary to adjust the hinges so that the doors align.Use the instructions below as a guide.

• To adjust the door vertically loosen the screw asshown and move up and down as needed.
• To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
• To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
• Please fix other screws

PARTS

HARDWARE

NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts are connected!

Product Usage Instructions

Assembly Steps

1. Identify all components and match them with the corresponding parts in the manual.
2. Start by connecting the larger components first before moving on to smaller parts.
3. Use the provided screws and bolts to secure the connections. Do not fully tighten until all parts are connected.
4. Refer to the diagrams in the manual for proper orientation and placement of each component.

This is an anti-dumping belt that fix the product to the wall and it can be used or not follow your needs.

If it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws, please do not overtighten the screws

Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>