Schneider Electric HMIG2U Harmony GTU Box Module Instructions
- September 4, 2024
- Schneider Electric
Table of Contents
HMIG2U Harmony GTU Box Module
“`html
Specifications:
-
Manufacturer: Schneider Electric Industries
SAS -
Brand Name: Schneider Electric
-
Product Function: High connectivity with a
wide range of industrial controllers -
Product Reference: HMIG5U
-
Representative Product Mass: 920 g
-
Representative Product Dimensions: 131mm x
188mm x 35mm
Product Description:
The Harmony GTU Box Module is designed for high connectivity
with industrial controllers. It is manufactured by Schneider
Electric Industries SAS and is part of the HMIG5U product line.
Additional Information:
This product falls under the scope of the European Union
directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE). Proper disposal according to local legislation is required.
End of life recyclers or treatment facilities should refer to this
document for appropriate treatment.
Product Usage Instructions:
-
Installation: Follow the installation guide
provided with the product to securely set up the Harmony GTU Box
Module. -
Configuration: Use the appropriate software
tools to configure the module based on your industrial controller
requirements. -
Operation: Ensure proper power supply and
connectivity for seamless operation with your industrial
controllers. -
Maintenance: Regularly check for any signs of
wear and tear and follow maintenance procedures as outlined in the
user manual.
Frequently Asked Questions (FAQ):
- Q: How do I dispose of the Harmony GTU Box Module at
end of life?
A: The product must be depolluted and disposed
of according to local regulations. Refer to the user manual or
maintenance guide for specific instructions.
- Q: What is the recyclability rate of the
product?
A: The recyclability rate is 57%, calculated
based on the REEECY’LAB tool. For components/materials not covered
by the tool, data from the ECO’ DEEE method was used.
“`
ENVEOLI1403023_V2 – End of Life Instructions – Harmony GTU Box Module
Product End of Life Instructions
Harmony GTU Box Module
Harmony GTU
ENVEOLI1403023_V2
2024/2/1
ENVEOLI1403023_V2 – End of Life Instructions – Harmony GTU Box Module
Potential disassembly risks
The Circularity profile provides information about preparation for re-use and
treatment. It identifies the relevant EEE components and materials as well as
their location. Safety instructions for product dismantling and depollution
are provided into the User manual or maintenance guide.
End of Life Instructions
1
Recommendation Potential hazards To be depolluted
Other
Number on drawing 1
2
Component / Material
Batteries Electronic Board (Communication) >
10cm²
Weight (in g)
2.5
278.2
639.3
2
Comment PCBA
ENVEOLI1403023_V2
2024/2/1
ENVEOLI1403023_V2 – End of Life Instructions – Harmony GTU Box Module
Product description
Manufacturer identification Brand name Product function Product reference Additional similar product references Total representative product mass
Schneider Electric Industries SAS Schneider Electric High connectivity with a
wide range of industrial controllers HMIG5U
HMIG5U2 HMIG5U21 HMIG5U22 HMIG3U HMIG3UFC HMIG2U
920 g
Representative product dimensions 131mm x 188mm x 35mm
Accessories Date of information release
No 2024/2/1
Additional information
Legal information Recyclability potential
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and materials of the product.
57%
Recyclability rate has been calculated based on REEECY’LAB tool developed by
Ecosystem, for components/materials not covered by the tool, data from the
“ECO’ DEEE recyclability and recoverability calculation method” was taken. If
no data was found a conservative assumption was used (0% recyclability).
Schneider Electric Industries SAS
Country Customer Care Center http://www.se.com/contact
35, rue Joseph Monier CS 30323 F- 92500 Rueil Malmaison Cedex RCS Nanterre 954
503 439 Capital social 928 298 512
www.se.com
ENVEOLI1403023_V2
Published by Schneider Electric © 2023 – Schneider Electric All rights reserved
ENVEOLI1403023_V2
2024/2/1
2024/2/1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>