nVent EM-M Conduit Pipe To Flange Clip Owner’s Manual
- September 3, 2024
- nVent
Table of Contents
nVent EM-M Conduit Pipe To Flange Clip
Product Specifications:
- Product Name: CABLE/CONDUIT Beam
- Model: EM-M CONDUIT/PIPE TO FLANGE CLIP
- Material: Spring Steel
- Finish: nVent CADDY Armour
Product Usage Instructions
Installation:
- Identify the appropriate size of the EM-M CONDUIT/PIPE TO FLANGE CLIP based on your conduit or pipe diameter.
- Position the clip on the flange securely.
- Ensure the spring steel material provides a tight grip on the conduit or pipe.
- Repeat the process for each clip needed in your installation.
Maintenance:
Regularly inspect the clips to ensure they are securely holding the conduit
or pipe in place. If any clip is loose or damaged, replace it immediately to
prevent accidents.
Removal:
- Disconnect the conduit or pipe from the clips by carefully releasing the grip of the spring steel.
- Gently remove the clips from the flange.
Frequently Asked Questions (FAQ):
-
Q: Are these clips suitable for outdoor use?
A: The spring steel material and nVent CADDY Armour finish make these clips suitable for both indoor and outdoor applications, providing durability and resistance to environmental conditions. -
Q: How do I know which size clip to use for my conduit or pipe?
A: Refer to the product manual or visit nVent.com/CADDY for guidance on selecting the appropriate clip size based on your conduit or pipe diameter.
CABLE/CONDUIT
Beam
EM-M CONDUIT/PIPE TO FLANGE CLIP
- Supports conduit/pipe or cable from beam flanges
- Snap close clip pivots a full 360°
- Requires only a hammer to install
Material : Spring Steel
Finish: nVent CADDY Armour
Part #|
Description|
F|
---|---|---|---
812M1318| 1/2”, 3/4” EMT,
13/16”–1 1/8” Flange| 75
lb| 50
pc
812M24| 1/2”, 3/4” EMT,
1/8”–1/4” Flange| 75
lb| 100
pc
812M58| 1/2”, 3/4” EMT,
5/16”–1/2” Flange| 75
lb| 100
pc
812M912| 1/2”, 3/4” EMT,
9/16”–3/4” Flange| 75
lb| 50
pc
16M24| 1” EMT, 1/8”–1/4”
Flange| 75
lb| 100
pc
16M58| 1” EMT, 5/16”–1/2”
Flange| 75
lb| 100
pc
16M912| 1” EMT,
9/16”–3/4” Flange| 75
lb| 50
pc
20M24| 1 1/4” EMT,
1/8”–1/4” Flange| 75
lb| 50
pc
20M58| 1 1/4” EMT,
5/16”–1/2” Flange| 75
lb| 50
pc
20M912| 1 1/4” EMT,
9/16”–3/4” Flange| 75
lb| 50
pc
24M24| 1 1/2” EMT,
1/8”–1/4” Flange| 75
lb| 50
pc
24M58| 1 1/2” EMT,
5/16”–1/2” Flange| 75
lb| 50
pc
24M912| 1 1/2” EMT,
9/16”–3/4” Flange| 75
lb| 50
pc
32M24| 2” EMT, 1/8”–1/4”
Flange| 75
lb| 50
pc
32M58| 2” EMT, 5/16”–1/2”
Flange| 75
lb| 50
pc
32M912| 2” EMT,
9/16”–3/4” Flange| 75
lb| 50
pc
6M24| 14-2 to 12-3 MC/AC,
1/8”–1/4” Flange| 75
lb| 100
pc
6M58| 14-2 to 12-3 MC/AC,
5/16”–1/2” Flange| 75
lb| 100
pc
6M912| 14-2 to 12-3
MC/AC, 9/16”–3/4” Flange|
75 lb| 100
pc
- Please refer to nVent.com/CADDY for UL listings
1-6 | nVent.com/CADDY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>