PawHut D02-179V01 Dog Kennel Outdoor for All Breed Dogs Installation Guide
- September 3, 2024
- PawHut
Table of Contents
PawHut D02-179V01 Dog Kennel Outdoor for All Breed Dogs
Product Specifications
- Model Number: IN231100092V01_GL_D02-179V01
- Country: US_CA
- Dimensions: 250 x 1310 x 1455 mm
- Weight: 850 kg
- Material: Steel
- Color: Black
Product Usage Instructions
Assembly:
- Refer to the user manual for detailed assembly instructions.
- Ensure every post is upright before proceeding with assembly.
- Fasten component (C) using the Rand electric tool in the correct direction.
- Double-check that all components are correctly assembled before using the product.
Warnings:
Make sure to follow these warnings for safe and proper usage of the product:
- Warning A: Guarantee every post is upright.
- Warning B: Fasten component (C) with the Rand electric tool in the right direction.
- Warning C: Ensure all components are correctly assembled before using the kennel.
Frequently Asked Questions
- Q: What should I do if a component is missing?
- A: In case of missing components, please contact our customer support for assistance in obtaining the necessary parts.
- Q: Can this product be used outdoors?
- A: Yes, this product is suitable for outdoor use. However, proper maintenance and care are recommended to ensure longevity.
- Q: How do I clean the product?
- A: Use a mild detergent and water solution to clean the product. Avoid using abrasive cleaners that may damage the surface.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Parts And Tools
BOX-1/2
Hardware
BOX-2/2
Installation Instructions
Done
Installing the chain link mesh
First start by unrolling the compressed chain-link mesh roll on the ground and extending it. Then check whether the mesh wires are misaligned and unhooked, and restore it. Next roll it again.
And use ties(I)to fix one side of the mesh on the braided door frame. After that wrap the mesh around the dog kennel. During the process of enclosing, use ties (I)to fix the mesh up and down to prevent it from slipping. After that tighten the mesh and fix it to another doorframe pillar and remove the excess mesh. Finally reinforce and fix with steel wire(H).
Notice
- Need 2 people at least when you assemble to avoid the damage of steel tube.
- Do not use this cage unless all bolts, screws and knobs are firmly secured.
- Please use it on a flat hard ground.
- No climbing and no revision on product.
- Caution, hands pinching.
Warning:
- Guarantee every post upright
- Fasten (C) with Rand electric tool in the right direction.
- Make sure every (C) assembled correctly before put your kennel in use.
Contacts
US
If you have any questions, please contact our customer care center.
Our contact details are below:
Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
CA
If you have any questions, please contact our customer care center.
Our contact details are below:
Imported by Aosom Canada Inc.
- 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
- MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>