PawHut D04-060 Elevated Pet Bed Dog Cot Instruction Manual

September 3, 2024
PawHut

PawHut D04-060 Elevated Pet Bed Dog Cot Instruction Manual
PawHut D04-060 Elevated Pet Bed Dog Cot

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

  1. To keep the bed and cover flat, please adjust the fabric with some force to move into the right position when assembling.
  2. For step 5-6, please align metal pipes with plastic parts first, then insert the pipes into the plastic parts.
  3. For step 5, the velcro may not be completely covered.As the cover being used for a period of time,will be a little looser than before, then you could tighten the cover the velcro completely.
  4. When the cover has been used for a while, you will be able to tighten the velcro.

PARTS

  • A x2

  • B x4
    Parts

  • C x6
    Parts

  • D x4

  • E x2
    Parts

  • F x1
    Parts

  • G x1

  • H x4
    Parts

  • I x4

Instruction

  1. Separate the velcro on the back of cover and insert the metal pipe A into the fabric as illustrated.
    Instruction

  2. lnsert 2 bed legs B into metal pipe A.
    Instruction

  3. lnsert 2 metal pipes C into the bed legs B as illustrated
    Instruction

  4. Connect the 2 centre plastic junctions D to the bed support leg E as ilustrated. Then insert plastic junctions Dinto metal pipes C.
    Instruction

  5. lnsert the other 2 metal pipes C into plastic junctions D.
    Instruction

  6. Connect metal pipe A with 2 bed legs B, then insert B into pipes C
    Instruction

  7. Pull hard over the metal pipe A, then stick the velcro. (see note 3)
    Instruction

  8. Turn the pet bed over
    Instruction

  9. Parts G and H required
    Instruction

  10. lnsert 4 tent poles H to the plastic connectors through the holes on the canopy
    Instruction

  11. Canopy finished! (Note: To connect the canopy with the pet bed cor erectly; the bigger angles of the canopy should be pointed to the long sides of the bed, the smaller angles of the canopy should be pointed to the short sides of the bed.)
    Instruction

  12. Plug the tent pole ends to the corners of the bed.

  13. Secure the canopy with the bungee cords at each corner of the bed legs B
    Instruction
    Done
    Instruction

Finished!(Note: The canopy side with plastic connectors faces outwards)

If you have any questions, please contact our customer care center.

US Our contact details are below:
001-877-644-9366
customerservice@aosom.com

Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
PawHut logo

Documents / Resources

| PawHut D04-060 Elevated Pet Bed Dog Cot [pdf] Instruction Manual
D04-060, D04-060 Elevated Pet Bed Dog Cot, Elevated Pet Bed Dog Cot, Pet Bed Dog Cot, Bed Dog Cot, Dog Cot, Cot
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PawHut User Manuals

Related Manuals