HOMCOM 837-349V80 Safdie Console Sofa Table Instruction Manual
- September 2, 2024
- HOMCOM
Table of Contents
HOMCOM 837-349V80 Safdie Console Sofa Table
Product Specifications
- Model: IN221100744V02_GL
- Part Numbers: 837-349V80, 837-349V81
- Capacity: 30MIN
- Dimensions: 18 x 4 x 50 + 1 (spare) inches
- Weight: 8 lbs
- Material: Durable plastic
Product Usage Instructions
- Unpack the product carefully and inspect for any damage.
- Assemble the components following the provided diagram in the manual.
- Ensure all parts are securely connected before use.
- Place the product on a flat, stable surface.
- Load the product with the appropriate materials as per your requirement.
- Follow the operating instructions to start using the product.
FAQ (Frequently Asked Questions)
Q: How do I clean the product?
A: Use a damp cloth with mild soap to wipe down the product. Do not use harsh
chemicals.
IMPORTANT. RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IF HAVE THIS ACCESSORY
-
QUICK FIT: Tighten quickfit until shoulder is flush with the panel.Do not overtighten or under tighten.
-
CAM LOCK:When fitting cam lock, ensure starting position is correct before you insert the connectina quickfit.
-
Quickfit head should be in the centre of the cam lock when the two panels are joined.
-
NOTE: Pull inner and outer drawer runners anart hefore fixina them to nanels
-
Slide drawer runners apart until the drawer lock can be seen. as shown..
-
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
-
CAl Vourinner and autor drama runnero pro rooduta ho fivad to nonala
-
Your inner and outer drawer runners are ready to be fixed to nanels
Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled otherwise it will affect the smoothness of the drawer.
- Be careful to push in the board when the both sides slide way been alianed.
- It may be necessary to adjust the hinges so that the doors align.Use the instructions below as a quide.
- To adjust the door vertically loosen the screw asshown and move up and down as needed.
- To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
- To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
- Please fix other screws
If it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tannina screws nlease do not overtiahten the screws
This is anti-dumping belt that fix the product to the wall and it can be used or not follow your needs.
- The buckles have N optional adjustment
- Adjust up and down for balance
PARTS
HARDWARE
installation
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com Imported by
Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>