QAZQA 106847 Outdoor Floor Lamp Instruction Manual
- September 2, 2024
- QAZQA
Table of Contents
QAZQA 106847 Outdoor Floor Lamp
Product Information
Specifications:
- Model: Antigua P120 Antique Gold 106847
- Power Supply: IP44 220-240V~ 50Hz
- Socket Type: E27
- Maximum Wattage: 15W
- Dimensions: 184mm x 1170mm
- Manufacturer: FittinQ B.V.
- Websites:
- www.qazqa.nl – Smaragdweg 52, 5527 LB Hapert, The Netherlands
- www.fittinq.com – 55 Baker Street, London, W1U 7EU United Kingdom
Product Usage Instructions
- To turn the light off, set the switch to position 1 or 4.
- To turn the light on, set the switch to position 2 or 7.
- Ensure the lamp is installed securely in the E27 socket before turning it on.
- Refer to the overall sizes mentioned for proper placement of the light fixture.
FAQ:
Q: How do I replace the light bulb in this fixture?
A: To replace the light bulb, first, make sure the fixture is turned off
and has cooled down. Then, gently unscrew the old bulb from the E27 socket and
replace it with a new one of no more than 15W.
Q: What should I do if the light does not turn on?
A: Check if the power supply is connected correctly and if the bulb is
securely fitted in the socket. If the issue persists, contact customer support
for further assistance.
Safety Precautions
ASSEMBLY INSTRUCTION
Antigua P120 Antique Gold 106847
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed ****
- Protection Class Il: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,The Netherlands
www.qazqa.nl
FittinQ LTD
55 Baker Street,London, WIU 7EU
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>