Kalia BF1913 Wall Mount Lavatory Faucet Without Drain Installation Guide
- September 2, 2024
- Kalia
Table of Contents
Kalia BF1913 Wall Mount Lavatory Faucet Without Drain
Specifications
- Brand: Kalia
- Collection: MorokaMC/TM
- Warranty: Lifetime Limited Warranty on Kalia Faucets for residential use
- Material: Various components as per product description
Product Usage Instructions
- Tools Required: Refer to the list of tools provided in the manual for assembly.
- Assembly: Follow the step-by-step assembly instructions provided in the manual.
- Sub-assembly: If required, follow the sub-assembly instructions before proceeding to final assembly.
- Care and Maintenance: Use only recommended cleaning methods and avoid harsh chemicals to maintain the product’s warranty.
- Installation: Ensure installation is done according to the provided instructions to avoid voiding the warranty.
IMPORTANT
- Read this guide before proceeding with the installation.
- Make sure you have all the tools and materials needed for installation.
- Make sure all the parts shown in the “Parts Diagram” section are included and in good condition. If there is a problem, report it immediately to the seller.
- Respect all local plumbing and building codes.
- Do not store cleaning products in an enclosed space such as under a kitchen sink counter or the vanity of a bathroom sink. Emanation from cleaning products can have devastating effects on plumbing fixtures and accessories such as flexible hoses. These products should be stored in a cool and ventilated space
Kalia reserves the right to make any changes to the design of the product,
without notice. Use the installation instruction supplied with the product.
Kalia is not responsible for problems caused by an installation not executed
in accordance with the directions given in this guide.
WARNING
- When connecting all the supply lines, pay close attention so there are no knots, this could limit water flow and damage the faucet.
NOTE
- The installation will require 9.5 mm (3/8”) male connectors.
- Before you start, cover the drain so no parts are lost.
- Check to make sure the water intake and drainage pipes are in good shape. Replace if necessary.
- For new constructions, before installing the faucet, make sure there is sufficient clea-rance to properly use the handle of the faucet.
- When replacing a faucet, make sure the supply lines are turned off with the faucet in the “on” position to relieve pressure. Once the installation is complete and stop-valves turned on, open water the source.
Tools
Parts List
Assembly| Sub-assembly| #| Part Number|
Description| Qty
---|---|---|---|---|---
–| –| 1| 106094-XXX | Decorative handle cap| 1
–| –| 2| 106113| M5 x 4mm set screw| 3
–| –| 3| 106114-XXX | Handle| 1
–| –| 4| 106115-XXX | Decorative cover| 1
–| –| 5| 106116| Retainer nut| 1
–| –| 6| 106117| Joint torique D33 x 1,8mm / O-ring D33 x 1,8mm| 1
–| –| 7| 106132| Cartouche / Cartridge| 1
–| –| 8| 106669| Aérateur ajustable / Adjustable aerator| 1
–| –| 9| 103328| Aérateur ajustable Calgreen / Adjustable aerator Calgreen|
1
–| –| 10| 106118-XXX | Bec du robinet / Faucet spout| 1
–| –| 11| 106119-XXX | Plaque mural / Wall plate| 1
–| –| 12| 106120| Capuchon protecteur du connecteur / Connector protector
cap| 1
–| –| 13| 106121| Joint torique D43,5 x 2,5mm / O-ring D43,5 x 2,5mm| 1
Spout connector assembly| 1
106154| –| 14| 106122| Joint torique D16 x 2mm / O-ring D16 x 2mm| 2
–| 15| 106123| Connecteur du robinet / Spout connector| 1
–| 17| 106125| Joint torique D21 x 2mm / O-ring D21 x 2mm| 1
–| –| 16| 106124| Vis M4 x 6mm / M4 x 6mm screw| 2
–| –| 18| 106548| Brut / Rough-in| 1
–| –| 19| 106127| Vis M4 x 14mm / M4 x 14mm screw| 1
–| –| 20| 106128| Capuchon protecteur de la cartouche / Cartridge protector
cap| 1
–| –| 21| 106129-XXX | Base de la manette / Handle base| 1
Stopper and drain with overflow assembly| 1
__
__
__
__
__
AC1327-XXX *
| Stopper assembly for push drain| 1
102775-XXX | 22| 102810-XXX | Bouchon / Stopper| 1
23| 102811| Joint torique du bouchon / Stopper seal| 1
24| 102812| Mécanisme de pression / Push mechanism| 1
Push drain assembly with overflow| 1
__
__
102774-XXX *
| 25| 102813-XXX | Base du drain / Drain base| 1
26| 102814| Joint de caoutchouc / Rubber gasket| 1
27| 102815| Joint de caoutchouc biseauté / Beveled rubber gasket| 1
28| 102816| Joint torique D24xD2.5 / O-ring D24xD2.5| 1
29| 102817| Nut| 1
30| 102818-XXX | About / Tailpiece| 1
–| –| 31| 102971| Aerateur key| 1
–| –| 32| 102887| Allen key 2,5mm| 1
–| –| 33| 106130| M4 x 32,5mm screw| 4
XXX means that the finish color must be specified
Parts Diagram
INSTALLATION INSTRUCTION
Determine location
IMPORTANT
Turn off hot and cold water supplies before begining.
Determine location
Fix the valve + Connect water supply
Verify installation
Remove the caps
Install the handle flange and decoration ring
Install the handle and the tub spout
Drain connections (model BF1914 only)
Verify installation
Troubleshooting Guide
Before any operation, turn off the water and turn the faucet on to release the pressure if required.
Water flow is low or non-existent?
- Make sure the supply line stop-valves are fully open.
- Remove the aerator and rinse.
Aerator leaks or the jet coming from it are not uniform?
- Remove the aerator using a special keyand rinse.
Water does not stop running completely?
- Replace the cartridge if damaged.
Maintenance and cleaning
To avoid damage and optimize your product, you must follow the recommendations
below when maintaining your Kalia product.
Frequently Asked Questions
What is covered under the lifetime limited warranty on Kalia faucets?
The warranty covers defects in material and workmanship for normal residential use for the original consumer-purchaser as long as they own their home.
What happens if I find a defect in the product during normal residential use?
Kalia Inc. may choose to repair, replace a part, or provide a replacement product at its discretion.
Are commercial installations covered under the same warranty terms?
Commercial installations have a limited one-year warranty period from the date of purchase.
What should I do if I encounter problems during installation?
Contact Kalia for assistance and ensure installation is done correctly as per the provided instructions.
Go to kaliastyle.com/files/entretien/maintenance- guide.pdf to learn about how to maintenance your Kalia product.
Printed in China