Kalia 105505_RevF Sliding Shower Door Instruction Manual

June 17, 2024
Kalia

Kalia 105505_RevF Sliding Shower Door

Kalia-105505_RevF-Sliding-Shower-Door-product

Corner sliding shower door with fixed panel and mobile panel (48’’ or 60’’) and return panel (32” or 36’’)

CHOICE OF STYLE INCLUDED:

Thank you for choosing Kalia!

  • Thank you for choosing a Kalia product and for placing your trust in our company.
  • Kalia has a business philosophy based on solid core values that are focused on providing innovation and excellence as well as a personalized service designed to meet the changing needs of today and tomorrow.
  • We are convinced that you will be fully satisfied with your new Kalia product and that it will exceed your expectations in terms of reliability and durability. At Kalia, we put our expertise to work for you!
  • This guide contains all the information necessary for the installation and proper use of your Kalia product. To ensure the smooth installation and optimal use of your product, we recommend taking a few moments to study the information provided in this guide.
  • If you should encounter a problem related to the installation or the performance of this product, please contact us at our toll-free line 1 877 GO KALIA (1-877-465-2542) or by email at: service@KaliaStyle.com.
  • Thank you once again for choosing Kalia.

Important Information

IMPORTANT

  • Read this guide before proceeding with the installation.
  • Respect all local plumbing and building codes.
  • Make sure you have all the tools and materials needed for installation.
  • It is recommended to wear safety glasses at all times during the installation.
  • Make sure all the parts shown in the Parts Diagram section are included and in good condition.
  • Manipulate parts with care.
  • The glass of the panels is tempered glass and must not be cut or drilled.
  • Make sure to have a shower base threshold minimum of 60 mm (2 3/8 po) for a proper installation.

COMMENT

  • Two people are required to install the shower door.
  • Cover the drain of the shower so no parts are lost.
  • Before installing, take the shower door out of the packaging and make sure all the parts are included and that they are in good shape (see the service parts diagram). If there is a problem, report it immediately to the seller.
  • For new constructions, before installing the shower door, make sure there is sufficient clearance to properly use the shower door.
  • Make sure the wall structure is built to support the shower door weight; as required and if possible, install 2”x4” wall studs behind the door wall jambs or use appropriate anchors for the wall covering type.
  • Kalia reserves the right to make any changes to the design of the product, without notice. Use the installation instructions supplied with the product.
  • Kalia is not responsible for problems caused by an installation not executed by the directions given in this guide.

Good installation!

Parts Diagram

Kalia-105505_RevF-Sliding-Shower-Door-fig- \(2\)

Sub-assembly # Part Number Description Total qty

UNIVERSAL COMPONENTS
Wall jamb assembly| 1


107044-XXX

| 1| 107043-XXX| –| –| Wall jamb| 1
| Bumper assembly| 1
14| 107025-160| 107026-160| –| Bumper| 1
13| 107027| –| Bumper fixation| 1
12| 107028| –| Bumper screw| 2
 | ****

2

| 104818

———– 104818-160

| ****

| ****

| ****

PVC spline

| ****

1

 | 5| 105543| –| –| Vertical water deflector with soft fin for mobile panel| 1
 | 6| 105544| –| –| Vertical water deflector with soft fin for fixed panel| 1
 | | PVC vertical seal with magnet kit| 1
 | ****

8

| ****

105239

105239-160

| 104828

—————–

104828-160

| ****

| PVC vertical seal with magnet| ****

1

 | ****

9

| 104829

—————–

104829-160

| ****

| PVC vertical seal with magnet and double-face tape| ****

1

Handles blister pack| 1








105575-XXX

| 37| 105576-XXX| –| –| External handle| 1


79

| 105714

—————–

105714-160

| ****

| ****

| External handle protective pad| ****

1


38

| 105577

—————–

105577-160

| ****

| ****

| Internal handle protective pad| ****

1

39| 105578| –| –| Slotted head bottom screw for Handle M6 x 30mm| 1
| Handle screw with o-ring assembly| 1
40| 105715| 105579| –| Slotted head top screw for Handle M6 x36mm| 1
81| 105580| –| Handle screw O-ring| 1


41

| 101386

—————–

101386-160

| ****

| ****

| Inner pointed Set screw M5 x 8mm| ****

1

42| 105581-XXX| –| –| Internal handle| 1
Hardware blister pack| 1
 | | Round-caps kit| 2
| ****

105618-XXX

| Roller round decorative cap and O-ring assembly| 1
20A| 105716-XXX| 104871-XXX| Roller round decorative cap| 1
22A| 104935| Roller O-ring OD9 x 1,9mm| 1
15A| 105586-XXX| –| Rail support round decorative cap| 1
| Square-caps kit| 2
| ****


105619-XXX

| Roller Square decorative cap and O-ring assembly| 1
20B| 105717-XXX| 105582-XXX| Roller square decorative cap| 1
22A| 104935| Roller O-ring OD9 x 1,9mm| 1
22B| 106086| Roller O-ring OD8 x 1,9mm| 1
15B| 105587-XXX| –| Rail support square decorative cap| 1
| Nylon roller and bearing assembly| 2
27| ****



106614-XXX

| 106619-160| –| Roller cam bushing| 1
23| 105719| –| Pin| 1
24| 104872| –| Nylon roller and bearing| 1
26| 104874-160| –| PVC protective pad with hole through| 1
28| 104876| –| Screw M6 x 25mm| 1
29| 104877-XXX| –| Roller interior decorative cap| 1
| Anti-jump assembly| 2
30| ****


106621-XXX

| 106622-160| –| Anti-jump| 1
31| 106624| –| lock nut| 1
32| 106623| –| Anti-jump cam bushing| 1
33| 104882| –| Philips head screw M4 x 16mm| 1
34| 104883-XXX| –| Anti-jump decorative cap| 1
| Rail connector sleeve assembly| 1
35| ****

104884-XXX

| 104885-XXX| –| Rail connector| 1


36

| 104886

———– 104886-160

| ****

| Inner pointed Set screw M6 x 6mm| 1





106668-XXX

| | Bottom guide assembly| 1
---|---|---|---
| ****










106666-XXX

| Bottom guide body assembly| 1
43| ****






106667-XXX

| 106677-XXX| Bottom guide body| 1


44

| 106628

—————–

106628-160

| Bottom guide sliding block| ****

1

45| 104112| Bottom guide spring| 1
46| 106629| Set screw M5 x 5mm| 1
84| 104159-XXX| Bottom guide decorative cap| 1
50| 104107-XXX| Bottom guide internal decorative cap| 1
51| 105592-XXX| 10mm Bottom guide external decorative cap| 1
61| 100634| Metal screw quadric ST4 x 25mm (1″)| 1
52| 105593| Protective pad for 10mm glass| 1
| Bottom guide assembly of mobile block| 1
48| ****

106630-XXX

| 104821-XXX| Bottom guide mobile internal central block| 1


49

| 106631

—————–

106631-160

| Bottom guide sliding internal block| ****

1

| Allen keys kit 2, 2.5, 3, 4| 1
78| ****


104888

| 105015| –| Allen Key ball-point 2mm| 1
62| 104889| –| Allen Key ball-point 2,5mm| 1
63| 104890| –| Allen Key ball-point 3mm| 1
64| 104891| –| Allen Key ball-point 4mm| 1
| Mounting screws kit| 1
59| 104892

—————–

104892-160

| 104893| –| Metal screw quadric – pan head ST4 x 50mm| 3
60| 104936| –| Metal screw quadric – flat head ST5 x 40mm| 2


55

| 105721

—————–

105721-160

| ****

| ST4 x 10mm screw for wall jamb cap| ****

2

53| 104118-XXX| –| –| End sill decorative cap| 1
56| 105595-XXX| –| –| Wall jamb decorative cap| 1
57| 102205| –| –| Wall anchor 6mm| 4
69| 102749| –| –| Wall anchor 8mm| 2
58| 104899| –| –| Wall jamb screw spacer| 3
65| 104690| –| –| Stair shim| 2
66| 104119| –| –| Spline tool| 1
RELATED COMPONENTS
(48″)| 3A| 105526-003| –| –| 10mm-Fixed panel 1952mm x 580mm (76-7/8” x 22-13/16”)| 1
(48″)| 7A| 105528-003| –| –| 8mm-Mobile panel 1940mm x 633mm (76-3/8” x 24-7/8”)| 1
(60″)| 3B| 105527-003| –| –| 10mm-Fixed panel 1952mm x 725mm (76-7/8” x 28-9/16”)| 1


(60″)

| ****

7B

| ****

105286-003

| ****

| ****

| 8mm-Mobile panel 1940mm x 780mm (76-3/8” x 30-11/16”)| ****

1

(48″)| 10A| 105552| –| –| Snap-in Notched PVC deflector for Sill 634mm (25″)| 1
(60″)| 10B| 105553| –| –| Snap-in Notched PVC deflector for Sill 792mm (31-3/16”)| 1
(48″)| 11A| 104836-XXX| –| –| Sill with Double-faced Tape for Snap-in PVC Deflector 607mm (23-7/8”)| 1
(60″)| 11B| 104838-XXX| –| –| Sill with Double-faced Tape for Snap-in PVC Deflector 763mm (30”)| 1
(48″) -160| 19A| 105554-160| –| –| Fixed panel black aluminium plate 565mm (1 x 22 1/4″)| 1


(60″) -160

| ****

19B

| ****

105555-160

| ****

| ****

| Fixed panel black aluminum plate 710mm (1 x 28″)| ****

1

Pre-installed Rail with support assembly| 1




105566-XXX (48″)

| 4A| 105557-XXX| –| –| Pre-installed Rail Kit| 1
17| 105565-160| –| –| Protective pad| 2
18| 105556-160| –| –| Protective sleeve| 2
54| 105722-XXX| –| –| Rail decorative cap| 1
| Rail support locking bushing assembly| 2
16| 105562-XXX| 105563-XXX| –| Rail support locking bushing| 1
71| 105564| –| Rubber O-ring| 1
Pre-installed Rail with supports assembly| 1
105567-XXX (60″)| 4B| 105558-XXX| –| –| Pre-installed Rail Kit| 1
17| 105565-160| –| –| Protective pad| 2
18| 105556-160| –| –| Protective sleeve| 2
54| 105722-XXX| –| –| Rail decorative cap| 1
| Rail support locking bushing assembly| 2
16| 105562-XXX| 105563-XXX| –| Rail support locking bushing| 1
71| 105564| –| Rubber O-ring| 1
 | 70| 105540-XXX| –| –| Montant mural / Wall jamb| 1
---|---|---|---|---|---|---
 |

2

| 104818

———–

104818-160

|

|

|

Joint de serrage en PVC / PVC spline

|

1

Hardware blister pack| 1

105600-XXX

| | Return panel rail connector sleeve assembly| 1

72

|

104905-XXX

| 104887

—————————-

104887-160

|

| Rail support protective pad|

1

73

| 104906

—————————-

104906-160

|

| Glass anchor protective pad|

1

74| 104907-XXX| –| Glass rail connector anchor| 1
80| 105594| –| Philips head screw M5 x 14mm| 2
| Return panel support kit| 1
75| 105596-XXX| 104159-XXX| –| Return panel support decorative cap| 1
76| 105597-XXX| –| Return panel support 10mm| 1
77| 105598| –| Protective pad for 10mm glass| 1
| Mounting screws kit| 1
59|

105599

105599-160

| 104121| –| Metal screw quadrex – pan head ST4 x 50mm (2″)| 3
82| 100177| –| Metal screw quadrex ST4 x 35mm (1-3/8″)| 1

55

| 105721

—————————-

105721-160

|

| ST4 x 10mm screw for wall jamb cap|

2

56| 105595-XXX| –| –| 10mm Wall jamb decorative cap| 1
57| 102205| –| –| 6mm Wall anchor| 4
58| 104899| –| –| Wall jamb screw spacer| 3
65| 104690| –| –| Stair shim| 2
RELATED COMPONENTS
(32″)| 68A| 105538-003| –| –| Return panel 1952mm x 750mm (76-7/8” x 29-1/2”)| 1
(36″)| 68B| 105539-003| –| –| Return panel 1952mm x 852mm (76-7/8” x 33-1/2”)| 1

XXX means that the finish colour or glass pattern must be specified.

Necessary Tools and Materials

Kalia-105505_RevF-Sliding-Shower-Door-fig- \(3\)

  • Right-opening
  • Left-openingKalia-105505_RevF-Sliding-Shower-Door-fig- \(4\)

CORNER INSTALLATION

  1. Validate the installation conformity of the base (A qualified installer is recommended)Kalia-105505_RevF-Sliding-Shower-Door-fig- \(5\)

  2. Wall jamb installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(6\)

  3. Fixed and returned panel installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(7\)

  4. Caps and PVC spline installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(8\)

  5. Rail preparationKalia-105505_RevF-Sliding-Shower-Door-fig- \(9\)

  6. Rail installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(10\)

  7. Bottom guide installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(11\)

  8. Return panel support installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(12\)

  9. Handles installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(13\)

  10. Rollers assembly and mobile panel installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(14\)

    • IMPORTANT
      After the mobile panel is installed, make sure it is levelled by making the proper adjustments (SEE STEP 11).
  11. Adjustment and securing of the mobile panelKalia-105505_RevF-Sliding-Shower-Door-fig- \(15\)

  12. Complete installation of the bottom guideKalia-105505_RevF-Sliding-Shower-Door-fig- \(16\)

  13. Brushed finish alignment adjustment
    Only for the door in brushed nickel finish (-120).Kalia-105505_RevF-Sliding-
Shower-Door-fig- \(17\)

  14. Sill installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(18\)

  15. PVC vertical seals with magnet installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(19\)

  16. Vertical deflectors installation

  17. Fixed panel black aluminium plate installationKalia-105505_RevF-Sliding-Shower-Door-fig- \(21\)

  18. CaulkingKalia-105505_RevF-Sliding-Shower-Door-fig- \(22\)

Maintenance and Cleaning

To avoid damage and optimize your product, you must follow the below recommendations when maintaining your Kalia product. Damages resulting from inappropriate handling are not covered by the Kalia warranty.

  • Rinse with clean water and dry with a soft cotton cloth, sponge or a squeegee after each use. Do not use anything abrasive such as a scouring brush or sponge to clean the surfaces.
  • For tough stains, use a gentle liquid detergent such as dish soap and hot water. Do not use an abrasive or acidic cleaner.
  • Carefully read the label on the cleaning product to make sure it is safe and appropriate. Always try the cleaning solution on a less visible surface before applying it to the rest.
  • Completely rinse with water immediately after applying the cleaner.
  • Regular cleaning prevents the accumulation of dirt and tough stains.

Warranty

LIMITED WARRANTY
Kalia Inc. offers the following express limited warranty on its products. This warranty extends only to the original owner/end-user for personal household use and is effective as of the date of purchase. The warranty is not transferable to subsequent owners. Additional limitations may apply for commercial use.

10-YEAR LIMITED WARRANTY ON KALIA SHOWER DOORS
Kalia Inc. guarantees all aspects of its shower doors to be free of defects in material and workmanship for normal residential use for as long as the original consumer-purchaser owns his or her home. If a defect is found during normal residential use, Kalia Inc. may, at its sole discretion, elect to repair or provide a replacement part or product. Damage to a product caused by accident, misuse, or abuse is not covered under this warranty. Improper care and cleaning shall have the effect of rendering this warranty void. Kalia Inc. is not responsible for labour, installation or other incidental or consequential expenses. Under no circumstances shall the liability of Kalia Inc. exceed the purchase price paid for a shower door by the owner/end-user, contractor or builder.

COMMERCIAL LIMITATIONS
In addition to the previously mentioned conditions and limitations, the warranty period for products installed for commercial applications, or used in commercial ventures, shall cover one (1) year from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer. If the product is sold by Kalia Inc. as a display item, a one (1) year warranty applies.

WARRANTY SERVICE
If you wish to claim this warranty, you may contact Kalia through your Dealer or directly at 1-877-GO-KALIA (1-877-465-2542) or again by writing to: service@KaliaStyle.com or to: Kalia Inc., Attn: Customer Service Dept., 1355 2nd Street, Sainte-Marie (Québec) G6E 1G9 Canada. Be sure to provide all pertinent information related to your claim, including a complete description of the problem you are experiencing, the product name, product model number, colour, finish, and finally the date and the location where the product was purchased. Also, include the product’s serial number or original receipt. For more information or to obtain the name and address of the service and repair centre nearest you, call 1-877-GO-KALIA.

EXCEPT AS SET FORTH HEREIN, KALIA INC. PROVIDES NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE.

This is the exclusive written warranty of Kalia Inc.

Contact Information

  • 1355, 2° Rue, Parc industriel Sainte-Marie (Québec) Canada G6E 1G9

  • T. 418 387-9090
    1 877 GO KALIA (1 877 465-2542)

  • F. 418 387-9089

  • W. KaliaStyle.com.

  • E. service@KaliaStyle.com.

Printed in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals