HOMCOM C30-001 Motorcycle Rear Stand User Guide
- September 2, 2024
- HOMCOM
Table of Contents
HOMCOM C30-001 Motorcycle Rear Stand
Product Specifications
- Mainframe x 1 piece
- Frame with wheels x 2 pieces
- Paddle adaptors x 2 pieces
- Screw x 2 pieces
- Washer x 2 pieces
- Locknut x 2 pieces
- Screw with plastic topper x 2 pieces
Product Usage Instructions
Assembly Instructions
- Insert both pieces of frame with wheels into the main frame.
- Ensure the frames are pushed together as much as possible, align the holes, add washers on each side, and tighten with locknuts.
- Insert adaptors on the top of the frame with wheels and tighten the screw with plastic.
Operation / Guide to Using
- Roll the stand and position your motorcycle’s rear wheel in the middle of the frame.
- Loosen the screws with a plastic topper while holding the adaptors.
- Adjust the position of the paddle adaptors to match the width of your motorcycle’s swing arm and tighten the screws with plastic.
- Raise the stand using the circled handle, move it under the swing arm, and press down to lift your motorcycle ensuring the paddle adaptors are snug against the swing arm.
Important
Always keep this stand away from children. Check that the stand is in good condition before each use.
FAQ
Q: How do I adjust the paddle adaptors to match my motorcycle’s swingarm width?
A: Loosen the screws with plastic topper, adjust the position of the adaptors, and then tighten the screws with plastic once positioned correctly.
Q: Is it safe to use this stand for all types of motorcycles?
A: This stand is designed for motorcycles with dual swing arms. Ensure compatibility before use.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Accessories
- Mainframe X 1PC
- Frame with wheels X 2PCS
- Paddle adaptors X 2PCS
- Screw X 2PCS
- Washer X 2PCS
- Locknut X 2PCS
- Screw with plastic topper X 2PCS
Assembly instructions
- Step 1: Insert both pieces of frame with wheels into the main frame.
- Step 2: Ensure that the frames are pushed together as much as possible, push the screw through align the holes and add the washer on each side Then use tools to tighten with the locknuts.
- Step 3: Insert adaptors on the top of the frame with wheels, then tighten the screw with plastic.
Operation Guide to using
- Roll the stand and make sure your motorcycle’s rear wheel is in the middle of the frame.
- Loosen the screws with plastic topper while holding the adaptors
- Adjust the position of the paddle adaptors to match the width of your motorcycle dual swing arm and then tighten the screw with plastic.
- Rise the stand with a circled handle and move the stand to where is under the swing arm, then press down the stand to raise your motorcycle. Make sure the paddle adaptors are snug up against the swing arm.
Important
- Always keep this stand away from children.
- Check the stand is in good condition before using it.
- If you have any questions, please contact our customer care center.
- Our contact details are below:
- 0044-800-240-4004
- enquiries@mhstar.co.uk
- IMPORTER ADDRESS: MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden Lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Documents / Resources
|
HOMCOM C30-001 Motorcycle Rear
Stand
[pdf] User Guide
C30-001 Motorcycle Rear Stand, C30-001, Motorcycle Rear Stand, Rear Stand,
Stand
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>