smeg PUM610X Cooker Hood Instruction Manual

PUM610X Cooker Hood

“`html

Specifications:

• Model: PUM610X / PUM910X Cooker Hood
• Version: V20210225
• Intended Use: Domestic
• Age Recommendation: Suitable for children aged 8 years and
  above

Product Usage Instructions:

Safety Instructions:

Before using the cooker hood, please read the safety
instructions carefully to ensure safe operation. Keep the manual
for future reference.

Installation:

1. The cooker hood must be installed according to the provided
installation instructions by a competent person or qualified
electrician.

2. Ensure the minimum distance between the supporting surface
for cooking vessels and the lowest part of the cooker hood is
maintained (at least 65 cm above a gas appliance).

3. Dispose of packing material carefully to avoid any hazards,
especially for children.

Operation:

1. Always use the cooker hood with grease filters and do not
operate if filters are excessively greasy.

2. Do not leave frying pans unattended to prevent fire
hazards.

3. Switch off electricity at mains during maintenance tasks like
light bulb replacement.

4. When cooking on a gas cooker, ensure lids are placed on pots
and pans.

Cleaning and Maintenance:

1. Pay attention to sharp edges inside the cooker hood during
installation and cleaning.

2. Ducting should have no bends sharper than 90 degrees to
maintain efficiency.

3. If the supply cord is damaged, it must be replaced by the
manufacturer or qualified personnel.

Ventilation:

1. Adequate ventilation of the room is required when using the
cooker hood simultaneously with gas or fuel-burning appliances.

2. When in extraction mode, ensure proper ventilation measures
are observed as the hood removes odors but not steam.

Frequently Asked Questions (FAQ):

Q: Can children use the cooker hood?

A: Children aged 8 years and above can use the appliance with
supervision or instruction on safe usage. Cleaning and maintenance
tasks should not be performed by children without supervision.

Q: What should I do if the cooker hood is damaged?

A: Do not attempt to use a damaged cooker hood. Contact the
manufacturer or qualified service personnel for repair or
replacement.

“`

PUM610X PUM910X Cooker Hood
Instruction Manual
V20210225

Contents
1…………………………………………………………………..Safety instructions 2…………………………………………………………………..Installation 3…………………………………………………………………..Start using your cooker hood 4…………………………………………………………………..Troubleshooting 5…………………………………………………………………..Maintenance and cleaning 6…………………………………………………………………..Environment protection
V20210225

SAFETY INSTRUCTIONS

This manual explains the proper installation and use of your cooker hood,

please read it carefully before using even if you are familiar with the product.

The manual should be kept in a safe place for future reference.

Never to do:
Do not try to use the cooker hood
without the grease filters or if the filters are excessively greasy!
Do not install above a cooker with a
high level grill.

monoxide poisoning. After installation of a range hood or other cooking fume extractor, the operation of open flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur.

Do not leave frying pans unattended

during use because overheated fats or oils might catch fire.
Never leave naked flames under the
cooker hood.

Always to do:

If the cooker hood is damaged, do not
attempt to use.
Do not flambé under the cooker hood.
CAUTION: Accessible parts may
become hot when used with cooking appliances.
The minimum distance between the
supporting surface for the cooking vessels on the hob and the lowest part of the cooker hood. (When the cooker hood is located above a gas appliance, this distance shall be at least 65 cm)
The air must not be discharged into a
flue that is used for exhausting fumes from appliances burning gas or other fuels. Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuels (including those in other rooms) due to back flow of combustion gases. These gases can potentially result in carbon

Important! Always switch off the
electricity supply at the mains during installation and maintenance such as light bulb replacement.
The cooker hood must be installed in
accordance with the installation instructions and all measurements followed.
All installation work must be carried
out by a competent person or qualified electrician.
Please dispose of the packing material
carefully. Children are vulnerable to it.
Pay attention to the sharp edges
inside the cooker hood especially during installation and cleaning.
Make sure the ducting has no bends
sharper than 90 degrees as this will reduce the efficiency of the cooker hood.
Warning: Failure to install the screws
or fixing device in accordance with these instructions may result in electrical hazards.
Warning: Before obtaining access to
terminals, all supply circuits must be disconnected.

V20210225

Always to do:
Always put lids on pots and pans
when cooking on a gas cooker.
When in extraction mode, air in the
room is being removed by the cooker hood. Please make sure that proper ventilation measures are being observed. The cooker hood removes odours from room but not steam.
There shall be adequate ventilation of
the room when the cooker hood is used at the same time as appliances burning gas or other fuels.
Cooker hood is for domestic use only.
If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance can be used by
children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Always to do:
Caution: The appliance and its
accessible parts can become hot during operation. Be careful to avoid touching the heating elements. Children younger than 8 years old should stay away unless they are under permanent supervision.
There is a fire risk if cleaning is not
carried out in accordance with the instructions.
Regulations concerning the discharge
of air have to be fulfilled.
Clean your appliance periodically by
following the method given in the chapter MAINTENANCE.
For safety reason, please use only the
same size of fixing or mounting screw which are recommended in this instruction manual.
Regarding the details about the
method and frequency of cleaning, please refer to maintenance and cleaning section in the instruction manual.
Cleaning and user maintenance shall
not be made by children without supervision.
When the cooker hood and
appliances supplied with energy other than electricity are simultaneously in operation, the negative pressure in the room must not exceed 4 Pa(4 x 105 bar).
WARNING: Danger of fire: do not
store items on the cooking surfaces.
A steam cleaner is not to be used. NEVER try to extinguish a fire with
water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

V20210225

INSTALLATION
If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an extraction duct (enamel, aluminum, flexible pipe or nonflammable material with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 60~75cm above the cooking hob surface for best effect. See pic 1.
3. Drill a hole in the cupboard, with hole wide 570265(mm) for 60cm model and hole wide 865265(mm) for 90cm model. See pic 2. Make sure the distance between the edge of the hole and the edge of the cupboard edge is at least 35mm.
4. Take off the aluminium filter and push the hood into the cupboard. Then use a screwdriver to secure the snap screws and fix the hood body to the cupboard. See pic 3
5. Fix the expansion pipe to the outlet with a cable tie and lead it to outside. Then Install aluminum filter. See pic 4. Note: The expansion pipe is not included in the product.
5

WARNING:

For safety reasons, please use only the same
size of fixing or mounting screws which are
recommended in this instruction manual.
Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.

Start Using Your Cooker Hood Electronic button

There are five buttons: (Decrease), (Power).See picture above.

(Increase),

(Lamp),

(Timer),

1. Power on: After connecting to power, indicator lights will lit on, all the output close and the hood will enter standby mode.
2. Power button” “:
2.1 Press power button ” ” once, its indicator light will lit on, the hood works at the 1st speed. The indicator lights of the buttons ” ” (Increase) and ” ” (Decrease) will be on. Press power button again to close it, and the indicator lights will be off. All the function operation of the hood will be closed, the hood enters into standby mode, and run by circle.
2.2 The increase button ” ” and lamp button ” “can work separately and not controlled by the power button. When a certain function button is pressed, the hood
6

operates at that function status,excluding timer function.Press power button under any status, the cooker hood will be switched off without any functions. 3. Press lamp button once, lights will be turn on. Indicator light of lamp button
and power button will lit on. Press lamp button again to turn off the lights.
Indicator light of lamp button and power button will be off. And recycle like this.

4. (Increase) button: There are five speeds.
4.1 Press (Increase) button, the cooker hood starts to work at the low speed.The

indicator lights of will be on.

(Increase) button,

(Decrease) button and

(Power) button

4.2 Press (Increase) button when it works at the 1st speed, the cooker hood works

at the 2nd speed.The indicator lights of (Increase)button, ( Decrease) button

and (Power) button keep bright. 4.3 Press (Increase) button when it works at the 2nd speed, the cooker hood works at the 3rd speed. The indicator lights of (Increase)button, ( Decrease) button

and (Power) button keep bright. 4.4 Press (Increase) button when it works at the 3rd speed, the cooker hood works at the 4th speed. The indicator lights of (Increase)button, ( Decrease) button

and (Power) button keep bright.

4.5 Press (Increase) button when it works at the 4th speed, the cooker hood works at the 5th speed. The indicator lights of (Increase)button will be off. The
( Decrease) button and (Power) button keep bright. 4.6 Press (Increase) button again when it works at the 5th speed, the cooker hood will still work at the 5th speed.
5. ( Decrease) button
Press (Decrease) button, the cooker hood will decrease one speed, and the display will show the current working speed. Press (Decrease) button when it works at the 5th speed, the cooker hood will work at the 4th speed. The indicator
lights of (Increase)button, ( Decrease) button and (Power) button will be on. Press (Decrease) button when it works at the 4th speed, the cooker hood will work at the 3rd speed. The indicator lights of (Increase)button, ( Decrease)
button and (Power) button will be on. Press (Decrease) button when it works

7

at the 3rd speed, the cooker hood will work at the 2nd speed. The indicator lights of
(Increase)button, ( Decrease) button and (Power) button will be on. Press (Decrease) button when it works at the 2nd speed, the cooker hood will work at the
1st speed. The indicator lights of (Increase)button, ( Decrease) button and (Power) button will be on.When press ( Decrease) button again when it works at the 1st speed, the cooker hood will turn off and the indicator light will be off.

(Timer) button:

6.1 The (Timer) button works when the motor is on only. Pressing the timer button when standby or separately turning on the lamp button is invalid.The timer setting is 5 mins and the indicator light of this button is on. Press again to close the timer function ,and the indicator light will be off.The timer could be repeat setting. When the time is up, the cooker hood will be turn off and the light will be off.

6.2 When the timer is set, if adjusting the speeds, the timer will automatically exit.

TROUBLESHOOTING

Fault
Light on, but motor does not work
Light does not work, motor does not work

Possible Cause
Fan switch turned off Fan switch failed Motor failed House fuses blown
Mains power cable is loose or disconnected

Solution
Select a fan switch position. Contact service center. Contact service center.
Reset/Replace fuses. Refit mains power cable to power outlet. Switch power outlet on.

Oil leakage
Lights not working Insufficient suction The Cooker hood inclines

One way valve and the outlet are not tightly sealed

Take down the one way valve and seal with sealant.

Leakage from the connection of chimney and cover

Take chimney down and seal.

Broken or faulty bulbs
The distance between the cooker hood and the gas top is too far The fixing screw is not tight enough

Replace bulbs as per this instruction.
Refit the cooker hood to the correct distance.
Tighten the hanging screw and make it horizontal.

8

NOTE:
Any electrical repairs to this appliance must conform to your local, state and federal laws.Please contact the service centre if in any doubt before undertaking any of the above.Always disconnect the unit from the power source when opening the unit.
MAINTENANCE AND CLEANING Caution:
· Before maintenance or cleaning is carried out, the cooker hood should be disconnected from the mains power supply. Ensure that the cooker hood is switched off at the wall socket and the plug removed.
· External surfaces are susceptible to scratches and abrasions, so please follow the
cleaning instructions to ensure the best possible result is achieved without damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold especially when cleaning.Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g.weekly) to ensure a long life expectancy.Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may be used.
NOTE:
Ensure that wiping is done along with the grain of the stainless steel to prevent any unsightly crisscross scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.
Important
Using neutral detergents and avoid using harsh cleaning chemicals, strong household detergents or products containing abrasives,as this will affect the appearance of the appliance and potentially remove any printing of artwork on the control panel and will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minutes in water with a mild detergent and then brush it gently with a soft brush. Do not apply too much pressure so as to avoid any damage to it. (Leave to dry naturally out of direct sun light) Filters should be washed separately to crockery and kitchen utensils. It is advisable
9

not to use rinse aid.
INSTALLING GREASE MESH FILTERS
· To install filters for the following four steps: – Angle the filter into the slots at the back of the hood. – Push the button on the handle of the filter. – Release the handle once the filter fits into a resting position. – Repeat to install all filters.
CARBON FILTER-not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed every 3 to 6 months according to your cooking habits. The installation procedure of activated carbon filter is as below:
1. Before installing or replacing the carbon filters, disconnect the mains power to the unit.
2. Press the filter lock and remove the mesh filter. 3. Turn the carbon filter on both sides of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters. 4. Place the mesh filter. 5. Connect the power supply to the wall socket.
NOTE:
· Make sure the filter is securely locked. Otherwise, it could loosen and cause danger.
· When activated carbon filter attached, the suction power will be lowered.
10

BULB REPLACEMENT

Important : The bulb must be replaced by the manufacturer, its

service agent or similarly qualified persons.

!

Always switch off the electricity supply before carrying out any operations on the appliance. When handling bulb, make sure it has completely cooled down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves to

ensure perspiration does not come in contact with

the bulb as this can reduce the life of the bulb.

Note: Before changing the lights, make sure that the appliance is turned off and

unplugged. Protect against danger when changing lights, such as wearing gloves.

Changing the lights:
1. Remove the grease filter. 2. Use the hand to press the LED light out.Then slightly pull the light connecting wire
out, and dismantle the terminal of the light connecting wire. 3. Apply the reverse procedure to install the light back. · ILCOS D code for this lamp is: DSS-1.5/65-S-120/33 ­ LED modules ­rectangle lamp
­ Max wattage: 2×1.5W
­ Voltage range: DC 12V ­ Dimensions:

11

ENVIRONMENTAL PROTECTION:
This product is marked with the symbol on the selective sorting of waste electronic equipment. This means that this product must not be disposed of with household waste but must be supported by a system of selective collection in accordance with Directive 2012/19/EU. It will then be recycled or dismantled to minimize impacts on the environment, electrical and electronic products are potentially dangerous for the environment and human health due to the presence of hazardous substances.For more information, please contact your local or regional authorities.
NOTE:
The following shows how to reduce total environmental impact (e.g. energy use) of the cooking process).
(1) Install the cooker hood in a proper place where there is efficient ventilation. (2) Clean the cooker hood regularly so as not to block the airway. (3) Remember to switch off the cooker hood light after cooking. (4) Remember to switch off the cooker hood after cooking.
INFORMATION FOR DISMANTLING
Do not dismantle the appliance in a way which is not shown in the user manual. The appliance could not be dismantled by user. At the end of life, the appliance should not be disposed of with household waste. Check with your Local Authority or retainer for recycling advice.
12

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>