JasonL 3200 Quadro A Wood Boardroom table Installation Guide
- August 31, 2024
- jasonl
Table of Contents
JasonL 3200 Quadro A Wood Boardroom table
Specifications:
- Product: Quadro A Wood Boardroom table
- Size: 3200×1100
- Tools Required: Power screwdriver; Allen key set (provided)
- Installation: 2 persons required
Product Usage Instructions
Step 1: Attaching Plastic Brackets and Connector Frame
Using the provided Allen Key, attach 2 plastic brackets per leg (E) and
Connector frame (C) using an M6x20MM Socket head screw (H).
Ensure the screws are securely fastened.
Step 2: Attaching Beam to Legs and Connector Frame
Secure the fixed beam (D) with the screws provided to the desk legs (B) and
Connector frame (C) using M8x20MM Socket head screws (G).
FAQ:
Q: What should I do if I need help during assembly?
A: You can call us on 1300 527 665 for assistance.
Q: Are there any additional costs for assembly?
A: Excluding Power Box Cutout, please inquire for assembly costs by
contacting our customer service or sales representatives.
Sizes:
3200×1100
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
COMPONENTS
-
A. Table top x2
-
B. Leg Quadro A x2
-
C. Connector frame x2
-
D. Beam x2 *
-
E. Plastic bracket x8
SCREWS -
F. M8x20MM CSK x4
-
G. M8x20MM Socket head x4
-
H. M6x20MM Socket head x8
-
I. M6x30MM Socket head x8
-
J. Allen key x2
Colour of the beam is always black, regardless desk frame colour.
ASSEMBLY INSTRUCTIONS
STEP 1
Using Allen Key provided, attach 2 plastic brackets per leg (E) (as per
picture above) using M6x20MM (H) Socket head screw. Do the same with Connector
frame (C).
STEP 2
Using Allen Key provided, attach M8x20MM Socket head (G)- screw socket half
way into leg for both legs (B) and into Connector frame (C).
STEP 3
Use fixed beam (D) and secure beam using screws provided to suit desk
STEP 4
Attach beam (D) to legs (B) and Connector frame (C) using nut insert in legs.
See point attached
STEP 5
Frame looks like this. Using Allen Key, attach beam (D) with Socket (F) Repeat
Step 1,2,3 and 4 then please do another set of legs. Please keep 400mm
distance between the two connector frame (C)
STEP 6
Place the desktop on top of the frame. Please place the legs ideally indent-ed
around 300mm from each end left and right of the Tops, Place the legs centred
at the same distance equally from the front and back of the top.
STEP 7
Please drill 30mm wood screws (HW7) through the plastic brackets into the
underneath of the tops.
STEP 8
Note: Exclude Power Box Cutout. Please inquire for assembly cost by contacting our customer service or sales representatives.
Need help! Call us on 1300 527 665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>