jasonl San Fran System 6 Person Workstation Installation Guide
- October 29, 2023
- jasonl
Table of Contents
jasonl San Fran System 6 Person Workstation
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided. Wood
screws will be required to be drilled directly into underside of desk top.
COMPONENTS
-
Leg x8
-
Adjustable Foot x8
-
Leg Cable Cover x8
-
Rail Lengths x4 (920mm)
-
Rail Widths x4 (620mm)
-
2-Way Connector x4
-
2-Way Connector Cap x4
-
3-Way Connector x4
-
3-Way Connector Cap x4
-
Rail Space Bracket x4
-
Slot Nut x12
-
Table Top x6 (1200mm x 700mm)
-
Support Connector x8
-
Rail Widths x2 (1750mm)
SCREWS -
M8x20mm Dome Head x4
-
M8x12mm Dome Head x28
-
M8x20mm Cap Head x8
-
M5x20mm Self Tapping x40
INSTALLATION INSTRUCTION
- Slide the 2-way and 3-way connectors over each leg, and securely lock into place using M8x20mm cap head bolts.
- Loosely connect the longer M8x20mm dome head bolt and slot nut through the rail spacer bracket. Slide onto required rails and fully tighten in place.
- Loosely connect the shorter M8x12mm dome head bolt and slot nut through the metal rail spacer bracket. Slide onto required rails and fully tighten in place.
- Securely connect legs to rails lengths using the shorter M8x20mm dome head bolts.
- Securely connect legs to rails widths using the shorter M8x12mm dome head bolts.
- Ensure the work surfaces are centered over the frame. Fully tighten all M5x20mm self tapping screws through each leg rail spacer and support connector bracket into the work surfaces.
- Cancel any power box cable using the magnetic leg cable covers.
Need help! Call us on
1300 527 665
www.jasonl.com.au
References
Read User Manual Online (PDF format)
Loading......