NORTHERN KENTUCKY CEDAR LLC CDSCK1214 Deluxe Shoe Cubby

Specifications

• Dimensions: Vary based on model (refer to chart)
• Height: All units are 84″ tall
• Material: Aromatic Red Cedar
• Usage: Designed for clothes, linens, and pantry items

Product Usage Instructions

Before You Start:

1. Exercise caution during assembly to prevent damage or injuries.
2. Secure the unit to the wall using studs or drywall anchors.
3. Plan ahead, assemble one unit at a time, and cut pieces only when confident they will fit.
4. Refer to the chart to determine if the unit fits in the desired space.
5. If using a cubby add-on, follow its specific instructions before assembly.
6. Consider assembling with the help of others for faster installation.

Tools Required:

• Safety Glasses
• Tape Measure
• Hammer
• Stud Finder
• Cup of Water Level
• 1/16 Drill Bit
• 1/8 Drill Bit

• 2 Square Bit

Your Kit Includes:

• (x12) 2″ Screws (C1)
• (x3) 3″ Screws (D1)
• (x12) Shelf Support Pegs (E1)
• (x2) Bottom Panels
• (x2) Top Panels (notched for baseboards)
• (x3) Pre-drilled Shelves of ordered size
• (x3) Adjustable Shelves of ordered size

Assembly Steps:

Step 1 – Bottom Shelf Placement:

1. Bottom Panels require two holes drilled for shelf placement.
2. Top and middle shelf placements are fixed, while the bottom shelf can be adjusted.
3. Drill two 1/8″ holes in the chosen position on the Bottom Panel for the shelf.

FAQ

• *  **Q: Can I install the unit alone?**

• A: While it is possible, it is recommended to have assistance for faster and easier installation.
• Q: What do I do if the scent wears off?
  • A: Lightly sand the Aromatic Red Cedar with a fine sandpaper to revitalize the scent.
• Q: Are knots, checking, and light cracks in the cedar a cause for concern?
  • A: No, these are typical characteristics of Aromatic Red Cedar and do not affect the product’s functionality.

Before You Start

1. Use caution when assembling this unit. Excessive weight will cause damage to the unit. Serious or fatal injuries may occur from the unit falling if not properly fastened to the wall.
2. Products that are instructed to be fastened to the wall must either be connected to a stud or by drywall anchors (not included).
3. Each unit may be attached to another or cut down to fit your needs. With that in mind; Plan ahead. Assemble each unit one at a time, and only cut down pieces when you are confident that they will fit together.
4. Using the chart below, determine if your unit will fit in the desired space. The only cuts you should make prior to assembly are on the panels of a cubby unit, so they will fit when standing up-right. Use the chart below accordingly.
5. If you purchased a cubby add-on, please refer to the instructions included with that unit before assembling anything. Special steps must be completed prior to installing this unit.
6. This unit is installed faster and much easier with the help of others.

For Support:

Call toll free 855.239.9498 or 606.742.2745 Email – sales@northernkycedar.com Once your unit is complete, we would love to see it! Send us pictures at our Email!

Thank You For Your Purchase

Because this system is based around the concept of individuality, this system can be used in conjunction with any Northern Kentucky Cedar, LLC product. The different ways are limited only by your imagination, and as such, not all components have to be used during installation. To ensure a proper and easy installation, thoroughly read and follow this document. Basic carpentry skills will help. This system is designed for clothes, linens, and pantry items. Placing excessively heavy items in your closet may lead to structural failure. Knots, checking, and light cracks are typical characteristics of Aromatic Red Cedar and do not warrant a cause for exchange or refund. If scent wears off, lightly sand with a fine sandpaper to revitalize scent. If you purchased a cubby add-on please refer to the instructions included with  that unit before assembling anything. Special steps must be completed prior  to installing this unit.

Tools you will need

Your Kit Will Include

Installation Instruction

Step 1 – Bottom Shelf Placement

1. Bottom Panels require two holes drilled in them for shelf placement.
2. Look at the top and middle shelf placement. Those are fixed in terms of placement, they have to go as shown.
3. The Bottom Shelf however can go in any of the bottom three holes. Once you decide which position you want your shelf, drill two 1/8” holes in the panel for the shelf. Use the pattern to the right.

Try to be gentle with the Pre-Installed Dowels

Step 2 – (Optional) Cut Bottom Panels

1. If the unit is going to be installed in a room that is shorter than 84” you must cut the bottom panels. Measure walls to determine if the unit will fit. If not, cut to an appropriate size. No cutting is required if the room is taller than 84”.

Step 3 – Assembling Cubby Unit (Pt.1)

Attach each pre-drilled shelf following the numbers below.

The panel side with the channels goes on the outside of the cubby

Once each shelf is attached use a damp cotton swab on the holes opposite the pre-glued dowels. Only using enough that the wood is wet, avoid free-standing water in the holes.

Step 4 – Assembling Cubby Unit (Pt. 2)

Once the panels are wet, Line-up holes and dowels then tap with wood block and hammer

Step 5 – Assembling Cubby Unit (Pt. 3)

Step 6 – Place Cubby Unit

Use the cubby as the center between two walls or units. Attach the cubby to a wall using 3” screws, preferably to a stud or use drywall anchors. Place a screw in all three shelves

Step 7 – Place Cubby Shelving

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>