PawHut D04-057 Viking Direct UK Instruction Manual
- August 30, 2024
- PawHut
Table of Contents
PawHut D04-057 Viking Direct UK
Product Specifications
- Model: IN221100781V01_GL
- Language: English
- Country Codes: US, CA
- Components:
- A: 2 units
- B: 4 units
- C: 2 units
- F: 1 unit
- G: 1 unit
- H: 4 units
- I: 4 units
Product Usage Instructions
- Unpack all components carefully.
- Refer to the manual for detailed assembly instructions.
- Connect component A to component C using provided connectors.
- Secure components B and F together using screws provided.
- Place components G and H in the designated slots.
- Connect component I to components G and H as per the manual.
- Follow steps 1-6 for each set of components until all are assembled.
- Ensure all connections are secure before use.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- To keep the bed and cover flat, please adjust the fabric with some force to move into the right positionwhen assembling.
- For step 5-6, please align metal pipes with plastic parts first, then insert the pipes into the plastic parts.
- For step 5, the velcro may not be completely covered.As the cover being used for a period of time,will be a little looser than before, then you could tighten the cover the velcro completely.
- When the cover has been used for a while, you will be able to tighten the velcro.
PARTS
USING INSTRUCTION
Separate the velcro on the back of cover and insert the metal pipe A into the fabric as illustrated.
lnsert 2 bed legs B into metal pipe A.
lnsert 2 metal pipes C into the bed legs B as ilustrated.
Please repeat step 2 on the other side,then connect 2 bed legs B with 2 metal pipes C. Pull hard over the metal pipe A, then stick the velcro. (see note 3)
Turn the pet bed over.
Parts G and H required
lnsert 4 tent poles H to the plastic connectors through the holes on the canopy.
Canopy finished! (Note: To connect the canopy witht the pet bed cor rectly; thebigger angles of the canopy should be pointed to the long sides of the bed, the smaller angles of the canopy should be pointed to the short sides of the bed.)
Plug the tent pole ends to the corners of the bed.
Secure the canopy with the bungee cords at each corner of the bed legs B.
Finished!(Note: The canopy side with plastic connectors faces outwards)
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
MORE INFORMATION
US
- customerservice@aosom.com
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
Frequently Asked Questions
- Q: What should I do if a component is missing?
- A: Please contact our customer support for assistance in obtaining the missing component.
- Q: Can I disassemble the product after assembly?
- A: Yes, you can disassemble the product following the reverse steps of assembly provided in the manual.
- Q: Is the product suitable for outdoor use?
- A: This product is designed for indoor use only. Avoid exposure to moisture or extreme temperatures.