UNI-T UTi720M/UTi721M Thermal Imager for Smart Phone User Guide

UNI-T UTi720M/UTi721M Thermal Imager for Smart Phone

Preface

Thank you for purchasing this brand new Uli720M/Uli721 M smartphone thermal camera module. In order to use this product safely and correctly, please read this manual thoroughly, especially the safety notes.
After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.

Limited Warranty and Liability

Uni-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination or improper handling. The dealer shall not be entitled to give any other warranty on behalf of Uni-Trend. If you need warranty service within the warranty period, please contact your seller directly.
Uni-Trend will not be responsible for any special, indirect, incidental or subsequent damage or loss caused by using this device.

Specifications

Connection

Enter the mobile APP. If the thermal camera module (the Device) is not detected, an interface for users to select the model will appear, as shown below.

Select “Uli721 M” or “Uli720M” to enter the following interface. At this time, users can open the “Gallery” and “Settings” pages, but other functions are unavailable. After inserting the device, a prompt will pop up. Select ”YES” to connect the device.

Screen Indicators/Icons

After the device is loaded, the initial smartphone page is shown in the figure below. The palette is lronbow by default, and the main page is divided into the following sections.

No.

1

| Description

Upper limit

| No.

7

| Description

Photo capturing /Recording/Saved

|
---|---|---|---|---
2| Temp. bar| 8| Lo spot|
3| Lower limit| 9| Center spot|
4| Gallery| 10| Hi spot|
5| Menu bar| 11| Center spot value|
6| PIP| 12| Settings|

6

Gallery

On the initial page, tap “Gallery” (N0.4 in Screen indicators/icons) to view the photos/videos. Tap the iccn to select/select all/share/delete photos/videos.

Tap an image/video to enter an interface where users can preview/share/delete/ edit (image only} this image/video, view its PIP/fusion mode or detailed infonmation (filename, date, time, resolution, Hi spot, Lo spot, center spot, mode, emissivity).

If the PIP or fusion mode is turned on when capturing a photo, tap the iccn when viewing this photo, a small PIP window will appear in the lower right corner. Users can tap to check the fusion status, and drag the upper slider to adjust the fusion ratio of visible light and infrared light.

If the PIP or fusion mode is not turned on when capturing a photo, when users tap the PIP or fusion iccn while viewing this photo, a prompt “No visible light!” will pop up.In the photo viewing interface, tap the iccn l!l to edit the current photo. The specific editing operations are as follows

In the photo viewing interface, tap the iccn to edit the current photo. The specific editing operations are as follows:

1. Rotate: Tap  icon to change the photo direction.
2. Add on screen analyzers: Tap i,il to display the interface as shown in the lower left. The analyzers can be added/moved/deleted.
3. Brush: Tap to display the interface as shown in the lower right. Users can mark a photo in different cclors. Tap il!l to withdraw the previous mark. (After saving a photo, tap can still withdraw.)

Isotherm: Tap lo enter the isotherm selection interface, as shown below.

Main Interface

Camera Switching

Tap to mirror the infrared image.

Fusion

When users tap the icon a slider for adjusting fusion will appear at the top. Dragging the slider can adjust the fusion ratio of visible light and infrared light (left figure). Tap the icon 1111 at the upper right corner, and ii will be highlighted (right figure). At this point, users can drag the screen to manually adjust the fusion distance. Tap the icon again to exit.

On Screen Analyzer

Tap !ill to enter the interface for adding on-screen analyzers. Users can add/move/ delete the analyzers (line/rectangle/point). Tap the icon l!il to delete all added analyzers. To delete a single analyzer, drag the analyzer to the edge until it disappears. Analyzers added in the main interface can be deleted in the editing interface

Tapping the corresponding icon can add an on-screen analyzer and expand a semi-transparent information bar on the bottom right of the interface to display the temperature information of the added analyzer. If users drag an analyzer to change its position, its temperature information will be updated synchronously. Up to 3 analyzers can be added for each type.

Palettes

In the main interface, tap , and the optional palettes will show on the top of the screen, including lronbow, Rainbow, White Hot, Red Hot, Black Hot, Lava, and Rainbow HG.

Palettes

In the main interface, tap , and the optional palettes will show on the top of the screen, including rainbow, Rainbow, White Hot, Red Hot, Black Hot, Lava, Rainbow HG.

PIP

Tap , and the APP will turn on the smartphone camera and display a small PIP window. Tap the icon again to tum it off.

Photo Capturing Video Recording

Slide the camera icon lefUright to switch between Photo Capturing and Video Recording modes. Both photos and videos will be automatically saved in “Gallery” (NO.4 in Screen Indicators/Icons).

Slide the camera icon le!Vright to enter the video mode. Tap video icon to record videos, and the recording duration will be displayed in the lower right corner. Tap the video icon again to end the recording.

Shutter Calibration

When the device is on, Shutter will automatically activate for calibration according to ambient changes or the different temperatures of measured target.

Settings

__

Temperature mark

| Thefollowing ma rkups can be turned on or off:

HI temperature LO temperature Centre point

__

HI/LO alarm

| HI/LO alarm can be turned on or off. After turning on the alarm, HI/LO value can be adjusted.
Emissivity|  | u.01-1. 0adjustable

0.05 -5.00adjustable

Distance(M)|
Ambient temperature

( ‘C}

| 0-5 0 ° C a djustable
Audio settings| Users can select whether to record sound during video recording.
Front camera| Swilch the front andrear cameras ofthe phone.
Help| View the user manual
About| Display the current APP version

and device model.

Tap to enter the setting interface. Users can perfom, the following functions.

FCC Compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause hamiful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cautions

• Do not use soluble liquids on the device, as it may cause damage.
• When using the device, please try to keep it stable and avoid violent shaking.
• Please do not violently disassemble the product to avoid irreversible damage.
• Please avoid hard objects contacting the device lens.
• Please do not point the product lens at high-intensity energy sources (including the sun, laser emission equipment and the reflection sources of these equipment), otherwise, ii may affect the measurement accuracy, and damage the infrared detector of the product.
• Please put the product into the carrying box when ii is not used.
• Due to different batches, the materials and details of actual products may be slightly different from the graphic infom,ation. Please refer to the goods received.
• The experimental data in the manual are theoretical values and all from Uni-Trend’s internal laboratories, for reference only. Customers cannot use them as bases for placing orders. If users have any questions, please contact customer service.

UNlT. UNI-TREND TECHNDLDGIV (CHINA) CD., LTD­ No. 6, Gong Ye Bei 1st Road, Songshan Lake National High-Tech Industrial Development Zone, Dongguan City, Guangdong Province, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>