Meiwang X01 Folding and Rotating Car Mount User Manual
- August 30, 2024
- Meiwang
Table of Contents
Meiwang X01 Folding and Rotating Car Mount
Product Usage Instructions
- Installation:
- Ensure that the antennas are installed with a separation distance of at least 20 cm from all persons. Do not co-locate the antennas with any other antenna or transmitter.
- Operation:
- Operate the device in compliance with Part 15 of the FCC Rules. The device should not cause harmful interference to other devices. It must accept any interference received, including interference that may cause undesired operation.
FAQs
- Q: What should I do if I experience interference with the device?
- A: If you experience interference, try adjusting the placement of the antennas to improve signal reception and minimize interference. Ensure that a separation distance of at least 20 cm is maintained from all persons.
- Q: Can I use this device in conjunction with other antennas or transmitters?
- A: No, this device should not be co-located with any other antennas or transmitters to ensure proper operation and compliance with FCC regulations.
Packaging List and Parameter
- Product Name: Folding And Rotating Car Mount
- Power: 15W, 10W, 7.5W, 5W
- Effective transmission distance: 0-6mm
Size:
- Intermediate disc diameter: 100mm 80mm 50mm
- Charging interface: USB TYPE-C
- Built-in battery: 150mAh
Packaging List
- Car bracket x 1, instruction manual x 1,
- Data cable x 1, car air outlet base (clip) x 1
- Car bracket x 1, instruction manual x 1,
- Data cable x 1, car air outlet base (clip) x 1
Product Features
- The product is designed as a double coil.
- This product achieves 90-degree rotation through a dual motor design, Achieve arbitrary angle switching of the bracket
Functional Components
- Pinch arm touch button
- Rotating touch button
- Left And Right Clamping arms
- Lighting Logo
- Dual coil charging area
- Rotating Motor
- Clamp Arm Motor
- Heat Dissipation Hole
Specification parameters
- Weight: 215.4g
- Material: ABS+PC electroplating+aluminum sheet hardware
- Input voltage/current: 5V/2A, 12V/1.5A
- Output power: 15W/10W/7.5W automatic recognition
- Rated frequency: 110K-205KHz
- Charging distance: 0-5mm
- Charging interface: TYPE-C
- Devices that support QC wireless fast charging, such as
- HUAWEI: HUAWEI P60/P50/P40/P30 Series,
- HUAWEI Mate60/50/40/30 Series, Mate X/XS/X2/XS2,
- HUAWEI Mate X3/Mate X5 Series
- iPhone: iPhone 8/X/11/12/13/14/15 Series
- SAMSUNG: Note20/10/9/8 Series, S10/9/8 Series, GALAXY Fold 5,Fold 6/, GALAXY W23/W24
- XIAOMI: MIX FOLD 3/FOLD 4
- OPPO: OPPO Find N/N2/N3 Series
- VIVO: VIVO X Fold/X Fold 2/X Fold 3/X Fold+
- HONOR: Magic V2/V3/V Flip/VS/VS3
Instructions for use
- When using, connect this product to the compatible data cable.
- Connect the USB end of the data cable to the car interface. (such as cigarette lighter converter and USB charging interface)
- The base clip can be used to clamp the air conditioning vent and can also be placed in other places that can be clipped.
- After connecting the device to a 5-9V DC power supply, touch the left button to open the wings, Put on the phone, and after one second, the wings will automatically turn off. At this time, the wireless fast charging is correct phone automatically charges.
- To remove the phone, touch the button and the left wing will automatically open. To remove the phone, use the wing The bladder automatically closes.
- With the right touch button, the bracket automatically rotates 90 degrees to the left, the phone is upright. This product The product has a built-in battery that can be opened and closed by touch in case of power failure.
- This device has built-in overvoltage protection, over-temperature protection, magnetic field protection, and short circuit protection. If an exception occurs, it will automatically stop working.
Cautions
- Do not over-squeeze or collide the device.
- Do not use this product in severe high temperatures, humidity, or corrosive environments to avoid damaging the circuit of the device.
- Thank you for using this product!
FCC
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for class digital devices, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>