HORIZON HOBBY EFL05050 Extra 330 SC 3D 1.3m RC Plane Instruction Manual
- August 30, 2024
- HORIZON HOBBY
Table of Contents
HORIZON HOBBY EFL05050 Extra 330 SC 3D 1.3m RC Plane
Specifications:
- Wingspan: 1308mm
- Length: 1260mm
- Weight:
- Without Battery: 1804g
- With recommended 4S 3200mAh Flight Battery: 2131g
Product Usage Instructions:
Required Tools:
Ensure you have the following tools for assembly:
- – Screwdriver
- – Hex key set
Model Assembly:
Mounting Landing Gear:
- Fit the landing gear into the slot.
- Secure the landing gear cover with four 3 x 15 mm screws.
- Attach the tail wheel bracket and tail wheel using two 2.6 x 12 mm flat head screws on the underside of the fuselage.
Mounting the Tail:
Follow the numbered steps in the manual to properly mount the tail of the aircraft.
Mounting the Propeller:
- Attach the propeller to the motor shaft ensuring it is properly aligned.
- Secure the spinner using a 3 x 26 mm screw.
Using the Binding Switch:
Refer to the manual for detailed instructions on using the binding switch.
Using the Binding Plug:
Refer to the manual for detailed instructions on using the binding plug.
Frequently Asked Questions (FAQ):
Q: What do I do if I experience oscillation at high speeds?
A: Refer to the troubleshooting section in the manual for further information on addressing oscillation issues at high speeds.
Q: How do I configure transmitter settings for different series?
A: Follow the specific instructions provided in the manual for configuring transmitter settings for NX, DX, and iX series transmitters.
References
- Ferngesteuerte Flugmodelle, Autos, Trucks, Hubschrauber, Boote und Fernsteuerungen | Horizon Hobby
- The Leader in Radio Control | RC Cars, Airplanes, and More
- The Leader in Radio Control | RC Cars, Airplanes, and More
- The Leader in Radio Control | RC Cars, Airplanes, and More