HOMCOM Rollator Walker Instruction Manual
- August 29, 2024
- HOMCOM
Table of Contents
HOMCOM Rollator Walker
Product Information
This product is a versatile assembly kit designed for multiple purposes. It includes various screws, bolts, and parts for easy assembly and installation.
Specifications
- Model: IN240400075V01_GL_713-034V01
- Country: US_CA
- Language: English (EN), Spanish (ES), Italian (IT)
Product Usage Instructions
Step 1: Sorting Parts
Before starting the assembly, carefully sort all parts to ensure you have
everything needed for the installation.
Step 2: Following Language Instructions
Refer to the instructions in the language of your choice (EN,ES, IT) for clear
guidance on the assembly process.
Step 3: Assembly Process
Connect the parts according to the provided diagrams. Do not tighten the bolts
fully until all parts are connected to avoid misalignment.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Maintenance
- The exterior of this rollator walker should be cleaned periodically with a soft damp cloth. Do not use abrasive cleaners or caustic chemicals.
- Check the parts for any looseness, wear, or damage periodically. If any problems are found, correct them before using them.
- If haven’t used it for a long time, please store it in a cool, dry and safe place.
Warning
- Before using, make sure the rollator is fully opened.
- Checking the brakes and seat are locked, seat part especially.
- The brakes must be locked before using the seat.
- Max loading weight is 150kg
PARTS
HARDWARE
NO TE
Do not confuse similar screws Do not tiahten bolts fully until all parts are
connected!
ASSEMBLY INSTRUCTION
STEP 1
Bucket Hanging Bracket (8) into ALUMINUM FRAME (6), following Previous step
again.
STEP 2
Joint two ARMRESTS (1) to ALUMINUM FRAME (6), with 1PC SCREW (D) ,2PCS
METAL GASKETS (B) and 1PC SCREW NUT (A) in one hole of each side (each side
has two holes).
Notes: Please make sure the semi-closed bracket face front to avoid bucket falling down.
STEP 3
Joint two ARMRESTS (1) or BACKREST WITH HANDLES (2), with 1PC SCREW (D),
2PCS METAL GASKETS (B) and 1PC SCREW NUT (A) in one hole of each side (each
side has two holes).
STEP 4
Put BUCKET (3) on the BUCKET HANGING BRACKET (8).
STEP 5
Put PADDED SEAT (4). jointing ALUMINUM FRAME (6) to two buckles.
STEP 6
Put PEDAL (5) on the anchor of ARMRESTS (1), align with the hole, insert the screw and install the nut on the other side
Frequently Asked Questions (FAQ)
Q: Can I use this product for outdoor installations?
A: Yes, this product is suitable for both indoor and outdoor use. Ensure
proper maintenance for outdoor installations to prevent rusting.
Q: Are additional tools required for assembly?
A: Basic tools like a screwdriver may be needed for assembly.
Refer to the manual for specific tool requirements based on your assembly
needs.
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
If you have any questions, please contact our customer care center.
Our contact details are below:
416-792-6088
customerservice@aosom.ca
Imported by Aosom Canada Inc.
7270 Woodbine Avenue, Unit 307, Markham,Ontario Canada L3R 4B9
MADE IN CHINA
If you have any questions, please contact our customer care center.
Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>