Turtle Beach MWBB0003 Burst II Air Gaming Mouse User Guide

Turtle Beach MWBB0003 Burst II Air Gaming Mouse

Product Information

Specifications

• Certification Model: Mouse: MWBB0003 Dongle: MWAA0003
• Package Contents:
  • USB Adapter
  • BurstTM II Air Gaming Mouse (no driver installed)
• LED Indication:
  • Below 10% battery : RGB LED disabled, indicator LED blinks red
  • Charging: Indicator LED color corresponds to battery level
  • DPI Button Press: Changes DPI with the corresponding LED color

Product Usage Instructions

Driver Installation

1. Remove the blue protective plastic from the mouse’s feet.
2. Navigate to www.turtlebeach.com/swarm2 and download the latest driver software.
3. Complete the installation to access all software features.

LED Indication

Refer to the LED colors for battery level, charging status, and DPI changes as specified in the manual.

Driverless Setup

• To enter config mode: Hold down buttons 1, 2, 3, and 8 for 3 seconds. LED sequence: white, red, green, blue.
• To exit config mode: Press buttons 1, 2, 3, and 8 simultaneously. LED sequence: blue, green, red, white.
• Buttons 6 & 7: Change polling rate. LED blinks in the corresponding color.
• Button 3: Swap lift-off distance. LED blinks in the selected color.
• Button 1 + mouse wheel: Change debounce value. LED blinks in the selected color.

FAQ

Q: How do I know when the battery is low?

A: The RGB LED will be disabled, and the indicator LED will blink red periodically when the battery is below 10%.

Q: How can I change the DPI settings?

A: Press the DPI button to cycle through different DPI stages.
Refer to the LED colors for each DPI stage as specified in the manual.

PACKAGE CONTENTS

DEFAULT BUTTON ASSIGNMENT

(no driver installed)

STANDARD

1. Left click
2. Right click
3. Middle mouse button
4. Scroll up
5. Scroll down
6. Browser forward
7. Browser backward
8. DPI cycle

INSTRUCTIONS

1. Remove the blue protective plastic from the mouse’s feet.
2. Select 2.4GHz mode on the power slider underneath the mouse to connect via the dongle. Alternatively, select Bluetooth® mode to connect via Bluetooth®.
3. Hold down buttons 3, 6 & 7 to enter pairing mode.
   • Via Dongle: The mouse will be paired automatically out of the box. For manual pairing, the indicator LED will breathe white while in dongle pairing mode and will turn off when successfully paired.
   • Via Bluetooth®: The mouse will enter pairing mode on first use, and complete the connection via your device’s Bluetooth® settings. The indicator LED will breathe blue while in Bluetooth® pairing mode and will turn off when successfully paired.
4. Navigate to www.turtlebeach.com/swarm2 and download the latest driver software.
5. Complete the installation to get access to all software features and setup.

LED INDICATION

• When the battery is below 10%, the RGB LED will be disabled, and the indicator LED will blink red periodically.
• When the mouse is charging, the indicator LED will display a color corresponding to the battery level.

• The battery level will be displayed on the indicator LED for 2s each time the mouse powers on or wakes up from sleep mode.
• Once the mouse is plugged in, pressing the DPI button will change the DPI and show a corresponding color on the indicator LED for 2 seconds.

The color is shown as below:

• The number of active DPI stages on your mouse can be changed in the driver software, along with the DPI value for each stage.

DRIVERLESS SETUP

• To enter config mode: hold down buttons 1, 2, 3, and 8 (default left click, right click, middle mouse, and DPI) for 3 seconds. The LED will show a sequence of white, red, green, then blue.
• To exit config mode: press buttons 1, 2, 3, and 8 at the same time once. The LED will show a sequence of blue, green, red then white.

Buttons 6 & 7 (browser forward & browser backward):

• Change polling rate. The LED will blink twice in the color of the selected polling rate.
• 125Hz – Blue
• 250Hz – Green
• 500Hz – Yellow
• 1000Hz – White (default)

Button 3 (middle mouse button):

• Swap between 1mm and 2mm lift-off distance. The LED will blink twice in the color of the selected lift-off distance.
• 1mm – Red (default)
• 2mm – Purple
• While holding button 1 (left mouse button), mouse wheel up/down: Change debounce value.
• The LED will blink twice in the color of the selected debounce value.
• 2ms – Orange
• 5ms – Purple (default)
• 10ms – Cyan

TECHNICAL FACTS

TECH SPECS

• Connectivity: 2.4 GHz Wireless, Bluetooth®, USB-A
• Sensor: Owl-Eye, 26k Optical
• Min/Max DPI: 50 / 26,000
• IPS Tracking Speed: 650
• USB Report Rate: 1,000Hz
• NVIDIA Reflex: Yes
• On-Board Memory: Yes
• Software: Swarm™ II
• Weight: 47g

SYSTEM REQUIREMENTS

• Windows® 10 and above (software support)
• USB 2.0 port or higher
• Internet connection (for driver installation)

Declaration of Conformity

Marking by this symbol:

• Hereby, Voyetra Turtle Beach Inc. declares that Burst II Air Mouse model: MWBB0003 & Dongle model: MWAA0003 complies with Directive 2014/30/EU(EMC), 2014/53/EU(RED), 2014/35/EU(Safety), 2015/863 amending Annex II to 2011/65/EC(RoHS), 2012/19/EU (WEEE), 2006/1907/EU (REACH), 94/62/EC (PACKAGING), 2006/66/EC (Battery), Electromagnetic Compatibility Regulations 2016(EMC), Radio Equipment Regulations 2017(Radio), Electrical Equipment Regulations 2016(Safety), The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
• The full text of the EU/UK declaration of conformity is available at the following internet address: http://www.turtlebeach.com/homologation
• Radiofrequency: 2400MHz
• Operating frequency: 2400~2483.5MHz
• Max. Output power: 4 dBm
• This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
• Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfill our obligation we are registered with Comply Direct and their Recycling Room.
• Here you will find advice and information on packaging waste management, recycling symbols, and the waste hierarchy principles of reduce, reuse, and recycle. https://www.complydirect.com/the-recycling-room/
• For instructions in other languages, please visit http://www.turtlebeach.com/homologation

FCC Statements

Regulatory Compliance Statements for the BURST II AIR

(Wireless Gaming Mouse – Mouse Model: MWBB0003 & Dongle Model: MWAA0003)

FCC Caution

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter.

CANADA-statement

This device complies with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Battery Caution:

• Do not disassemble, impact, squeeze, or throw into the fire;
• Do not continue to use if severe swelling;
• Do not place in a high-temperature environment;
• Do not use it after the battery is flooded;
• Do not use any charger other than that specifically provided for use with the equipment;
• Dispose of used batteries according to the instructions

Radiation Exposure Statement:

• The product complies with Canada’s portable RF exposure limits set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
• Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.
• For warranty information and service, please visit www.turtlebeach.com/warranty

WARRANTY

WARRANTY SERVICE FOR PURCHASES IN AUSTRALIA

• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. For complete details please visit www.turtlebeach.com/warranty.
• To make a warranty claim in Australia during the Warranty Period, Purchaser should contact the VTB repair center:
• Tecworks International Pty Ltd, 13 Distribution Place, Seven Hills NSW 2147, Tel: 1300 074 512
• VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS, NY 10601, USA
• © 2024 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners.
• Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made liable for any errors that may appear in this manual.
• This publication or parts of it may not be reproduced without the express consent of the publisher.
• 427-002-005-500 RE
• Mouse: 020-230375
• Dongle: 020-230145
• Any questions?
• www.turtlebeach.com/support
• Please register your product to receive important updates.
• www.turtlebeach.com/productregistration
• For warranty, visit:www.turtlebeach.com/warranty.

References

• Turtle Beach Support
• Turtle Beach Support
• Turtle Beach Support
• 产品认证 - Product Certification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>