Josnown P8 Automatic Foaming Soap Dispenser Instruction Manual

June 2, 2024
Josnown

Josnown P8 Automatic Foaming Soap Dispenser Instruction Manual

Product Description

Machine Structure

Product Parameters

Model Number: P8 Rated power :1. 5W
Turn on: Touch+sensor
Sensing speed: 0.25s
Sensing distance: 0 -70mm
Dispensing: 0. 3/0.8/1. 5/2.0s (4 levels)
Bottle capacity: 400ML
N.W.:249g (not include soap) G.W.: 287 (not include soap) Working temperature: 5°C ~ 40°C
Water proof: IPX5 Working humidity: 0% ~85%

Accessories

Funtion

Turn ON: Press touch area, LED1 will be lighted for 2s
Turn OFF: Long press touch area for 2s, LED1 & LED4 will flash for 3s.
Switch Level: Press power button, then the gear can be switched accordingly
Level illustration: Level 1 – LED1 lighted (Dispensing 0. 3s) Level 2 – LED1, LED2 both lighted (Dispensing 0.8s) Level 3 – LED1, LED2, LED3 all lighted (Dispensing 1. 5s)
Level 4 – LED1, LED2, LED3, LED4 all lighted (Dispensing 2.0s ) Lower Battery: The led light will be flashing 55 then turn off automatically
Sensing: Put your hand to the dispensing nozzle and keep
the distance range of 0-70mm, then the machine will dispense the soap you need.
Cleaning Mode: Tur on the machine and triple click the power button to start the cleaning mode. The machine will automatically tun off the cleaning mode after 10 seconds, or you can click the power button to tun it off.
Note: The soap dispenser will enter a standby mode if it o not work for a long time, no need to tun it off yourself.
Note: The soap dispenser will enter a standby mode if it o not work for a long time, no need to tun it off yourself.

Setup

Turn 90 degrees counterclockwise to unscrew the bottle

Stop Sprayed out Troubleshooting’

Cut the nozzle tip of th dredge bottle with scissors.

Fill the dredge with clean water.

Remove the plug from the hose of the dispenser.

@Firmly insert the tip of the dredge bottle into the tube and press the bottle A lightly to release the water
until the water comes out from the nozzle.

Acknowledge

  1.  Please fully charge the machine before use.

  2.  Please confirm whether the water got in the machine i the machine starts spraying, or was upside-down or titing.
    If necessary, please wipe and dry it before continuous use.

  3. Do not immerse the product into water or rinse it directly to avoid short circuts. It is recommended to use a we towel to gently wipe the surface of the product when itis turned off.

  4. .Do not put them in a place where the kids can touch them. Persons who are physically unsound, mentally impaired, and lack relevant experience and knowledge (including children) should use under the supervision and guidance of their guardian.

  5. Do not pull the power cord with wet hands and make sure the adapter and power cord are dry before charging

  6.  Plug the soft rubber into the charging port to prevent water from entering.

  7.  Do not throw it into the fire, this product contains a built-in rechargeable battery.

  8. Do not use it while charging or at high temperatures.

  9.  Store this product i a cool place, and keep away from direct sunlight or heat sources. Please pour out the hand sanitizer to avoid deterioration of the liquid if it s not used for a long period of time

Prolinx Global LTD

27 Old Gloucester Street, London, WCTN 3AX, UK
Manufacturer:
Longgangqubantianjiedaoyongxiangxilu21haod18
Shenzhenshi, Guangdongsheng, 518000

FAQ

Please stop using the machine if you find any abnormality or failure of our product and deal with it
according to the type of failure!

Troubleshooting

  1. Q: The machine suddenly self-bubbling and the indicator flashes quickly.
    A: The sensor area may be covered by foam o there is something in the sensor area (0-70mm). Please tum off the machine, clean the sensor area and try again.

  2. Q: Why it can’t dispense when | mix shower get and water?
    A: Most cleaning products are too viscous to us  directly. We recommend to use foam Soap or 1:3~1:4 ratio of liquid soap to water.

  3.  Q: The machine can’t be turned on and no response to touch area after fully charge, or the gears switch by itself.
    A: There may be water on the touch area. Please wipe the touch area and try again

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals