LA CROSSE TECHNOLOGY 925-1418 Sensor Weather Shield Owner’s Manual
- August 28, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
LA CROSSE TECHNOLOGY 925-1418 Sensor Weather Shield
SENSOR WEATHER SHIELD
The Sensor Weather Shield is designed to help protect your sensor from rain, snow, and debris. When installed properly, it may also offer limited protection against the sun’s heat. Even with this added protection, we still highly recommend mounting the sensor in a shaded location for accurate temperature readings.
INSERT SENSOR (NOT INCLUDED)
- Twist the cover clockwise to remove the base.
- Attach the Velcro tape to the sensor and to the upright on the base. This prevents tipping.
- Alternately, secure the sensor with a zip tie.
- If your sensor includes a probe, be sure the probe wire fits through the round hole in the base.
- Place cover over sensor and base. Twist counterclockwise to lock into place. Sensor must fit entirely in the sensor shield to be protected.
- Check that sensor is within range and reporting to your station before mounting in selected location.
Note: This is only the Sensor Shield. Sensors and probes are sold
separately.
For sensor compatibility visit: https://www.lacrossetechnology.com/925-1418
-sensor-weather-shield
MOUNT SENSOR SHIELD
Mount to a flat surface:
- Twist the cover clockwise to remove the base.
- Place one long screw through the center hole of the base.
- Tighten until the head of the screw is flat with the base.
Mount to a wall or post:
- Slide the mounting bracket down and remove from the cover. Find aste det local and attache be crack theatrocke, with the four screws (included), or with the two zip ties (included). Note: Allow room to slide cover onto bracket.
- Slide the shield down onto the bracket.
DIMENSIONS
7.00″ H x 3.73″ W x 3.98″ D (177.8 × 94.74 × 101.9 mm)
Warranty and Support
La Crosse Technology Ltd. provides a 1-year limited-time warranty on this product relating to manufacturing defects in materials & workmanship. Per the Song-Beverly Act, in the state of California, the warranty on this item becomes effective on the date of delivery.
More Infomation
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
Patents:
www.lacrossetechnology.com/pages/patents
If you require additional support, get in touch with our friendly customer
support team based out of La Crosse, WI.
Phone: 1.608.782.1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm
CST.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>