Urban Vitamin Cupertino Headphone P3295 User Manual

: June 14, 2024
: URBAN VITAMIN

Table of Contents

Urban Vitamin Cupertino Headphone P3295 User Manual
DEVICE LAYOUT
CHARGING
PAIRING
FUNCTIONS
SPECIFICATIONS:
NOTICE
EU Declaration of Conformity
FAQ
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Urban Vitamin Cupertino Headphone P3295 User Manual

CUPERTINO HEADPHONE

DEVICE LAYOUT

1- Volume+/Next song
2- Volume-/Previous song
3- ANC on/off
4- On/off , Play/pause button
5- Battery/Charging indicator
6- AUX port
7- Typ-C charging port
8- MIC

CHARGING

1. Connect the charger to the charging port.
2. While charging the LED indicator will be solid red. When fully charged the LED indicator will turn off automatically.

PAIRING

1. Turn on the headphones by pressing and holding down the phone button on the headphones for three seconds
2. The device’s LED indicator will illuminate. The LED indicator light will blink between red and blue when it is in pairing mode.
3. On the mobile device (smartphone/tablet) turn on the BT connection.
4. Select “Urban Vitamin Cupertino” in the available Wireless devices on your mobile device.

FUNCTIONS

You can turn on/off the ANC function with the ANC button. The indicator light will be green when ANC is on.

Play/pause music: Press 4
Pick up phone call: Short press 4
Reject phone call: Long (2 s) press 4
End phone call: Short press 4
Next song: Long press 1
Previous song: Long press 2
Volume +: Short press 1
Volume -: Short press 2
ANC on/off: Press 3
Siri/Google Assistant: 2s press 4

SPECIFICATIONS:

Speaker driver (mm)	40mm
S/N Ratio (dB)	98dB
Frequency range (Hz-KHz)	20Hz-20KHz
Continuous playing time	50 hours
Charging time earbuds	3 hour
Battery capacity	500 mAh
Mic function	yes
Pick up function	yes
BT version	5.3+EDR
BT pairing name	Urban Vitamin Cupertino

DANGER!

To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.

NOTICE

1. Keep the product dry; do not place the product in damp places.
2. Keep out of direct sunlight and high temperatures High temperatures may result in damage.
3. Keep out of cold temperatures, this will help avoid internal damage.
4. Do not disassemble the product.
5. Avoid dropping the product.
6. Do not continue to charge the product over 10 hours.
7. When charging use the Type-C charging cable that came with the product.

EU Declaration of Conformity

XD Connects B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xdconnects.com > search on item number.

FAQ

How can I reset my headphone?

Press and hold “-” button for about 5 seconds when the headphone is in pairing mode. After reset you can hear a voice prompt saying “Bye”.

What to do if I cannot find the headphone in BT devices list?

On your mobile device, turn off Bluetooth and turn it back on. Then try pairing again.
Delete the headphone from the Bluetooth list on your mobile device. Then try pairing again.
Move your mobile device closer to the headphone and away from any interference or obstructions. Then try pairing again.

Can I connect to my computer or laptop?

Yes, but only if your computer or laptop has Bluetooth function.
Remark: When connecting the headphone with computer or laptop, the MIC function is not always available on all computers and laptops. This is due to the system design /setting /compatibility of your specific computer and laptop, but not an indication of any problems with the headphone.

Can I wash my ear pads?

No. The ear pads are made with leather, and not detachable from the product.
Therefore, it’s not suitable to wash the surface by water. Never immerse the headphone in water. You can use a cloth to clean the ear pads.