VAAGHANM YS11M8 Heating Pad for Back Pain and Cramps Relief User Manual

VAAGHANM YS11M8 Heating Pad for Back Pain and Cramps Relief

IMPORTANT: PLEASE STORE THESE

• INSTRUCTIONS FOR FUTURE REFERENCE! READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT, ESPECIALLY THE SAFETY INSTRUCTIONS.
• SHOULD YOU GIVE THIS UNIT TO ANOTHER PERSON. YOU MUST PASS ALONG THESE INSTRUCTIONS

ICONS

• THIS GUIDE CONTAINS IMPORTANT INFORMATION ABOUT USING OPERATING AND STORING THE PRODUCT.
• PLEASE READ IT THROUGH AND NOTE THAT NONOBSERVANCE OF THESE INSTRUCTIONS CAN RESULT IN SERIOUS INJURY OR DAMAGE TO THE DEVICE.

WARNING

• THESE WARNING NOTES MUST BE OBSERVED TO PREVENT ANY INJURY TO THE USER

NOTE

• THESE NOTES GIVE YOU USEFUL ADDITIONAL INFORMATION ON THE INSTALLATION OR OPERATION
• CAUTION THESE NOTES MUST BE OBSERVED TO PREVENT ANY DAMAGE TO THE DEVICE

Symbols

• LOT NUMBER
• MANUFACTURER
• DO NOT PUNCTURE THE HEATING PAD
• DO NOT USE THE HEATING PAD WHEN IT IS FOLDED
• ONLY USE THE HEATING PAD INDOORS
• THE HEATING PAD CAN BE WASHED IN GENTLE CYCLE AND BY HANDS AT MAX 40°C/104°F
• DO NOT BLEACH!
• DO NOT DRY THE HEATING PAD IN A TUMBLE DRIER
• DO NOT IRON THE HEATING PAD
• DO NOT DRY CLEAN!

SAFETY INFORMATION

1. THE APPLIANCE IS ONLY TO BE OPERATED THROUGH ITS CONTROL.
2. PLEASE CHECK THE HEATING PAD BEFORE EACH USE. DO NOT USE IF YOU NOTICE WEAR DAMAGE OR SIGNS OF IMPROPER USE ON THE CONTROL CABLE OR HEATING PAD. RETURN THE DAMAGED PRODUCT TO THE SUPPLIER.
3. BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY, PLEASE MAKE SURE THAT THE SUPPLY VOLTAGE STATED ON THE RATING PLATE IS WITHIN THE ALLOWED POWER RANGE.
4. DO NOT FOLD OR CREASE THE HEATING PAD DURING USE.
5. DO NOT PIERCE THE PAD WITH OR ATTACH SAFETY PINS OR OTHER SPIKY OR SHARP OBJECTS TO THE PAD
6. DO NOT USE THE HEATING PAD ON CHILDREN OR PERSONS WHO ARE DISABLED, ASLEEP, OR INSENSITIVE TO HEAT
7. THE UNIT IS DESIGNED FOR HOME USE ONLY.
8. DO NOT KEEP THE HEATING PAD SWITCHED ON AFTER YOU FALL ASLEEP
9. PROLONGED USE OF THE HEATING PAD AT A HIGH SETTING COULD LEAD TO SKIN BURNS.
10. DO NOT COVER THE HEATING PAD WITH ANY OTHER CUSHIONS. THE CONTROL SHOULD NOT BE COVERED OR PLACED ON OR BELOW THE HEATING PAD WHILE IT IS IN OPERATION.
11. DO NOT SIT ON THE HEATING PAD. ONLY PLACE THE PAD ON THE PART OF YOUR BODY YOU WANT TO TREAT
12. NEVER TOUCH A HEATING PAD THAT HAS FALLEN INTO WATER UNPLUG THE UNIT FROM POWER IMMEDIATELY
13. KEEP THE POWER CORD AWAY FROM HOT SURFACES.
14. NEVER CAPRY PULLOR TURN THE HEATING PAD BY THE CORD AND DO NOT LET THE CORD GET TANGLED.
15. ONLY USE IT IN DRY ENVIRONMENTS NOT IN THE BATHROOM OR SIMILAR ENVIRONMENTS.
16. DO NOT EXPOSE THE CONTROL AND CABLE TO MOISTURE OR HUMID.
17. IF A FAULT OCCURS, DO NOT ATTEMPT TO REPAIR THE UNIT BY YOURSELF. REPAIRS MUST ONLY BE CARRIED OUT BY AN AUTHORIZED TECHNICIAN OR OTHER SUITABLY QUALIFIED PERSONNEL.
18. IF THE CABLE IS DAMAGED IT MUST BE REPLACED BY ITS MANUFACTURER, ITS SERVICE AGENT, OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD. WHEN STORING THE HEATING PAD ALLOW IT COOL DOWN BEFORE FOLDING.

WARNING

1. CONSULT YOUR DOCTOR BEFORE USING THE HEALING PAD IN CASE YOU HAVE ANY HEALTH CONCERNS
2. DO NOT USE THE HEATING PAD ON PARTS OF THE BODY THAT ARE SWOLLEN, INJURED, OR INFLAMED.
3. IF YOU EXPERIENCE PERSISTENT PAINS, IT CAN BE SYMPTOMS OF SERIOUS ILLNESS, STOP USING IMMEDIATELY AND CONSULT YOUR DOCTOR.
4. IF YOU EXPERIENCE ANY PAIN OR DISCOMFORT WHILE USING THE UNIT, STOP USING IT IMMEDIATELY. NOT INTENDED FOR MEDICAL USE IN HOSPITAL.

WARNING

1. PLEASE ENSURE THAT POLY BAG IS KEEP AWAY FROM CHILDREN! RISK OF SUFFOCATION!
2. DO NOT USE THE HEATING PAD WHEN IT IS WET.
3. DO NOT USE ON A HELPLESS PERSON, AN INFANT, OR A PERSON INSENSITIVE TO HEAT.
4. CHILDREN NOT USE THIS APPLIANCE DUE TO THEIR INABILITY TO REACT TO OVERHEATING
5. WHEN STORING THE APPLIANCE, ALLOW IT TO COOL DOWN BEFORE FOLDING, DO NOT CREASE THE PAD BY PLACING ITEMS ON TOP OF IT DURING STORAGE.
6. USE ONLY THE CONTROL MARKED ON THE RATING LABEL.

IMPORTANT SAFETY

INSTRUCTIONS DO NOT DESTROY DANGER – To reduce the risk of burns, electric shock, and fire, this product must be used per the following instructions.

1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID, SLEEPING, OR UNCONSCIOUS PERSON, OR A PERSON WITH POOR BLOOD CIRCULATION UNLESS CAREFULLY ATTENDED.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF THE CONTROL SETTING, CHECK THE SKIN UNDER THE PAD FREQUENTLY.
7. DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
8. DO NOT SIT ON OR CRUSH PAD – AVOID SHARP FOLDS.
9. NEVER PULL THIS PAD BY THE SUPPLY CORD.
10. DO NOT USE THE CORD AS A HANDLE.
11. LOOP THE CORD LOOSELY WHEN STORING, TIGHT WRAPPING MAY DAMAGE THE CORD AND INTERNAL PARTS.
12. SAVE THESE INSTRUCTIONS.

Please read this User Guide thoroughly before use and retain it for future reference.

Package Contents

• 1 x Heating Pad
• 1 x User Guide
• The packaging can be reused or recycled, Please dispose properly if no longer needed.

Use Method

1. First, connect the power cord to the heating pad, and then the power cord to the power supply (110V/60Hz). If the power cord first accesses the power supply, and then connects the power cord to the heating pad is a dangerous operation, and the display screen will appear error code flashing.
2. After the correct access to the power cord, click once on the ON/OFF button, and the product into standby mode, if there is no operation within 10S, the screen will automatically turn off.
3. In the default state of standby, you need to click “+” or “-” to enter the default state. By default, the temperature display for 115°F, the temperature gear for 5, timing gear for 2 H.
   • At this time, you need to set the temperature gear first, then set the timing gear. If the reverse order, the controller operation is invalid.
4. Temperature Control: The machine has 10 temperature gears: 95°F/100°F/105°F/110°F /115°F/120°F/125°F/130°F/135°F/140°F. The default gear is 115°F, then click “+” or “-” to adjust the temperature level.
5. Timing Control: In the default state of this controller, you have to adjust the temperature gear before you can adjust the timing gear, the device has four timing gear: 0.5H/1H/1.5H/2H. 2H in the default state, click the timing button can be cyclically switched (2H ~ 0.5H ~ 1Н ~ 1.5H).

Attention
Do not spray or wet the connector of the control.

Warm Reminder:

1. The product displays with an LED lighting function. If the display is not operated within 10S, the LED light will be turned off automatically. Click any button to light up the screen again when the light is off.
2. Long press the timing key for 3S to switch the Fahrenheit°F/ Celsius°C unit display (a working state in any state).

Specifications

The pad is clean and as dry as possible.
 |

1. Be sure to disconnect the appliance from the mains by removing the plug from the power outlet and cooling it down for at least ten minutes before cleaning.
2. Use only a soft brush to clean the heating pad when dry.
3. DO NOT use strong detergents or hard brushes to clean the heating pad.
4. Gentle Machine Wash: Select Gentle Cycle for Wool, detach the control connector, and then wash at a maximum of 40°C/104°F.
5. Untangle the cable from time to time.
6. When storing the appliance, allow it to cool down, Store the unit in a clean and dry place, and lay it out flat with nothing covering or resting ontop of it.

Warm Reminder

• A. Control Connector
• B.Pad Connector
• The connector of the controller and the pad must be interconnected before plugging the appliance into a power source.
• IMPORTANT – This appliance has a polarized plug (one blade is wider than the other).
• To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• DO NOT attempt to rights safety feature

product
2| E| Short circuit of the heating line| Stop using the product immediately
3| E| Thyristor short circuit| The controller is damaged
4| E| Damage to the heating line| Stop using the product immediately
5| 4| Controller high-temperature protection| Turn off the power and Leave it for 1 hour to reapply power
6| 5| Controller low-temperature protection| Turn off the power and leave it for 1 hour to reapply the power
7| b| Load identification error| Leave the blanket to cool to about 77°F, then re-identify
8| C| Poor contact between plug and socket| Replace the socket
8| C| Frequency out of range| Normal use frequency range 47-63Hz

Customer Service

• We provide 1-year worry-free warranty service.
• If you have any questions, please contact us through Amazon’s “Contact Seller”, we will be happy to serve you and guarantee a 100% satisfactory solution. Any questions?
• Feel free to contact us first.
• Email: KH_Support@163.com

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received including interference that may causeundesired operation.

MANUFACTURER
Ningbo Kanghong Electrical Appliance CoLtd Address: NO.18, Jiali Road Zonghan Development Area, Cixi, Zhejiang China 315301

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>