ilumeplay LF1365 Smart Scene Music Lamps Instruction Manual
- June 14, 2024
- ilumeplay
Table of Contents
ilumeplay LF1365 Smart Scene Music Lamps
Instruction
Basic parameters
- Controlling method : APP/RF Type/key board type
- Working temperature : -20degrees to +60degrees
- Power: 1.5W/Pice
- Power supply voltage : DC5V ( Each DC5V 2A power supply can load 15pcs modules, if need more modules.
- Applied places: study room,living room, bedroom, night club or bar, KTV, gym, music bar or restaurant, coffee shop and other home and commercial places.
Installation instructions
- Please make a model layout plan in advance or pre-manufacture the model on the desktop, and define the position of the drive control line entrance.
- Remove the release paper on one side of the double-sided non-marking adhesive, stick the double-sided adhesive to the center of the back of the module, and remove the release paper on the other side of the non-marking adhesive before installation. (This step is omitted for desktop installation)
- First locate the drive control line entrance module, then insert the arrow pointing end of the connecting piece (NEXT end) into the cascade module, and insert the “PRE” end of the connecting piece into the previous module according to the sequence of the modeling plan to complete the installation.
- Insert the USB end of the drive control line into the first module, and then plug the other end of the drive control line into any signal output port corresponding to the pickup, and power the power adapter to complete the installation.
Connection manual
DIY any assembly style
Please read carefully before using the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>