FULL SWING Kit Studio Instructions
- July 25, 2024
- FULL SWING
Table of Contents
FULL SWING Kit Studio
Product Specifications
- Model: Full Swing Kit Studio
- Compatibility: Laptop, Projector
- Connection: USB-C cable
- Requirements: Wi-Fi connection on laptop
Product Usage Instructions
Powering on the Full Swing Kit Studio
- Power on the Laptop to initiate the FS Launcher App.
- Power on the Projector and wait 15-20 seconds for it to start.
- Power on the Full Swing Kit Studio (KIT).
- Connect the USB-C cable from the laptop to the power port on the KIT.
- Look for the USB symbol on the KIT to confirm the connection.
Initiating Game Mode
- Select the FS Golf Kit icon on the laptop.
- Observe the KIT to see it light up Green 1x and the display screen switching to Full Swing Kit Game Mode.
- Once connected, a Green Checkmark will appear in the top rightcorner near the USB symbol.
Setting up for Gameplay
- If not already, position the KIT at the end of the TurfExtension.
- You are now ready to start playing!
NOTE: Ensure your laptop has a stable Wi-Fi connection for successful interaction between the technologies when using the Full Swing Kit Studio.
Quick Start
How to Connect the USB-C from KIT to the Laptop
- Power on the Laptop. The FS Launcher App should open automatically.
- Power on the Projector (allow 15-20 seconds for the projector to come on).
- Power on the KIT.
- Plug the USB-C cable from the side of the laptop into the power port on the side of the KIT.
- There will be a USB symbol that displays on the KIT letting you know they are connected.
- On the laptop, select the FS Golf Kit icon.
- Watch the KIT at this time as it will light up Green 1x and the display screen will change to the Full Swing Kit Game Mode. Once connected there will be a Green Checkmark in the top right corner next to the USB symbol.
- Place the KIT at the end of the Turf Extension if not already.
- Begin Playing!
NOTE: Wi-Fi to the laptop is crucial for these two technologies to connect; ensure you have good signal when operating the Full Swing KIT Studio.
Frequently Asked Questions
- Q: What should I do if the USB symbol doesn’t display on the KIT after connecting?
- A: Try reinserting the USB-C cable and ensure it is securely connected. If the issue persists, check the cable for any damages or try using a different USB-C cable.
- Q: How can I troubleshoot connectivity issues between the laptop and the Full Swing Kit Studio?
- A: Make sure your laptop’s Wi-Fi signal is strong and stable. Restart both the laptop and the KIT. Verify that all connections are secure and properly set up according to the user manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>