The Home Depot 8742432 Commercial Refrigerator and Freezer Instructions
- August 27, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot 8742432 Commercial Refrigerator and Freezer
IMPORTANT! PLEASE READ BEFORE INSTALLATION
- If the unit has recently been transported, please let the unit stand still for a minimum of 24 hours before plugging it in.
- Make sure that the unit drops down to the desired temperature before loading the unit with product.
- Make sure that there is proper ventilation around the unit in the area where it will operate.
- Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the unit in.
- Please read through the manual in its entirety.
CABINET LOCATION GUIDELINES
- Install the unit on strong and leveled surfaces
- Unit may make unpleasant noises if the surface is uneven.
- Unit may malfunction if the surface is uneven.
- Install the unit in an indoor, well-ventilated area
- Unit performs more efficiently in a well-ventilated area.
- For best performance, please maintain clearance of 4″ on the back of the unit.
- Outdoor use may cause decreased efficiency and damage to the unit.
- Avoid installation in a high humidity and/or dusty area
- Humidity could cause the unit to rust and decrease efficiency of the unit.
- Dust collected on condenser coil will cause the unit to malfunction. Clean the condenser at least once a month with a brush or clean cloth.
- Select a location away from heat and moisture-generating equipment
- High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and gradual breakdown of the unit.
ELECTRICAL
Please ensure that the required voltage of the compressor is being supplied
at all times. Low or high voltage can detrimentally affect the refrigeration
unit. All units should be plugged into a grounded and properly-sized
electrical outlet.
INSTALLATION
IMPORTANT!!! PLEASE READ BEFORE INSTA LLATION
- If the unit has recently been transported, please let unit stand still for a minimum of 24 hours before plugging it in.
- Make sure that the unit drops down to desired temperature before loading the unit with product.
- Make sure that there is proper ventilation around the unit in the area where it will operate.
- Make sure all accessories are installed(i.e. shelves, shelf clips. casters) before plugging the unit in.
- Please read through the manual in its entirety.
CABINET LOCATION GUIDELINES
- Install the unit on strong and leveled surfaces
- unit may make unpleasant noises if surface is uneven
- unit may malfunction if surface is uneven
- Install the unit in an indoor, well-ventilated area
- unit performs more efficiently in a well-ventilated area
- for best performance, please maintain clearance of 4″ on the back of the unit
- outdoor use may cause decreased efficiency and damage to the unit
- Avoid installation in a high humidity and/or dusty area
- humidity could cause unit to rust and decrease efficiency of the unit
- dust collected on condenser coil will cause unit to malfunction. Clean the condenser at least once a month with a brush or clean cloth
- Select a location away from heat and moisture-generating equipment
- high ambient temperatures will cause the compressor to overwork, leading to higher energy bills and gradual breakdown of the unit
ELECTRICAL
Please ensure that the required voltage of the compressor is being supplied at
all times. Low or high voltage can detrimentally affect the refrigeration
unit.
All units should be plugged into a grounded and properly-sized electrical
outlet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>