Die Maus 9810103 Alarm clock with night light Mouse Instruction Manual

Die Maus 9810103 Alarm clock with night light Mouse

Specifications

• Name: Alarm clock with night light – Mouse
• Function: Alarm clock
• Material: ABS+Silicone
• Light color: White
• Power supply: 3.7V, 18650 (1800mAh)
• Input: 5V 1000mA

Product Usage Instructions

Charging the Device

1. Connect one end of a USB-C cable to the clock and the other end to a USB charging port or adapter.
2. A red light near the USB-C port indicates charging, turning green when fully charged.
3. The device plays the title melody of Die Sendung mit der Maus(Mouse TV) before turning off automatically when fully charged.

Adjusting LCD Screen Brightness
In time display mode, press the LCD brightness button to cycle through brightness levels: 30%, 60%, and 100%.

Setting Time and Date

1. Press and hold the TIME button to enter time setting mode.
2. Adjust the hour using the left/right buttons. Press and hold for faster adjustment.
3. Short press the TIME button to confirm and move to the next setting (minutes > day > month > year).

Night Light Operation
To use the night light feature, refer to the night light indicator on the clock for activation and deactivation.

Frequently Asked Questions (FAQ)
Q: How do I dispose of the battery in the device?
A: Fully discharge the battery before disposal in accordance with local regulations for proper disposal of electronic waste.

About this Instruction Manual

Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

General Warnings

• Choking hazard — This product contains small parts that could be swallowed by children. This poses a choking hazard. Keep the USB cable away from children under the age of 3 years.
• Risk of electric shock — This device contains electronic components that operate via a power source (integrated battery). Only use the device as described in the manual, otherwise, you run the risk of an electric shock.
• Risk of electric shock if the power supply is not used correctly. The power supply is not suitable for children under the age of 3 years.
• Risk of fire/explosion — Do not expose the device to high temperatures. Use only the supplied power supply. Do not short-circuit the device or throw the device into a fire! Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion.
• The terminals must not be short-circuited.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
• Keep instructions and packaging as they contain important information.
• Check the Power supply for damage to the cord, plug, enclosure or other parts on a regular basis before use. Do not use until the damage has been repaired. The toy is not intended for children under three years. The toy must only be used with the recommended power supply. The power supply is not a toy.
• The toy is not to be connected to more than the recommended number of power supplies.
• This product contains rechargeable batteries, it should be charged under adult supervision.
• The power supply used with the toy are to be regularly examined for damage to the cord,plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with this power supply until the damage has been repaired.
• Check the power supply for damage before charging the alarm clock.
• The power supply is not a toy. Please remove it when the alarm clock has been charged.
• Do not attempt to modify or repair the product. This could damage the product and risks causing the battery to generate heat, short curcuit or ignite.
• Keep away from fire, direct sunlight, high temperatures and/or humidity.
• Do not use the product if it overheats, leaks, emits an odor or you notice other irregularities.
• Never store this product in a confned space.
• Always leave 5mm space around the product for ventilation.
• Throw away at frst sign of damage or weakness.
• Do not expose the product to moisture.
• The toy shall only be used with a power supply for toys.
• This toy contains batteries that are non-replaceable.
• This product is not waterproof, keep it away from water.
• The toy is only to be connected to equipment bearing either of the following symbol: or

Technical data

• Name: Alarm clock with night light – Mouse
• Function: Alarm clock
• Material: ABS+Silicone
• Light colour: white
• Power supply: 3.7V, 18650 (1800mAh)
• Input: 5V 1000mA

EC Declaration of Conformity

Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EC declaration of conformity is available at the following internet address: www.bresser.de/download/9810103/CE/9810103_CE.pdf

Parts overview

1.  Silicone body with built-in night light
2. Night light indicator
3. Battery indicator
4. Time display
5. Weekday display
6. Snooze indicator
7. Alarm indicator
8. Power button
9. TIME button
10. LCD Brightness  button
11. Left button
12. Right button
13. Speaker
14. USB-C port for charging
15. ALARM button

Charging the device

1. To charge the device, connect one end of a USB-C cable to the clock and the other end to a suitable USB charging port or adapter.
2.  A red light near the USB-C port will turn on, indicating that the device is charging.
3. When the device is fully charged, the light will turn green.

PLEASE NOTE

• When the battery level is low, the battery indicator on the display will start flashing, signaling that the device needs to be charged soon.
• When the battery is almost empty the alarm clock will sound “Batterie leer” and then the “Die Sendung mit der Maus” (“Mouse TV”) title melody before turning off automatically. The device needs to be charged in order to function again.

Turning the power on/off

To switch the device on, press and hold the power button. The display will illuminate completely for 1 second and the title melody of “Die Sendung mit der Maus” (“Mouse TV”) will play. Once the device is powered on, the night light will light up at the lowest brightness setting and the display will show the battery indicator, the current time, the alarm indicator (only if the alarm is turned on), the weekday and the night light indicator.
To switch the device off, press and hold the power button again.

Adjusting LCD screen brightness

In time display mode, short press the brightness button to adjust the screen brightness level. There are three settings available: 30%, 60%, and 100% brightness.

Setting the time and date

Press and hold the TIME button to enter the time setting mode. The setting se- quence is: hour > minutes > day > month > year.

1.  Setting hour: After entering the time setting mode, the hour section will start flashing on the display. Use the left/right buttons to adjust the hour (press and hold for faster adjustment). Short press the TIME button to confirm and move to the next setting.
2. Setting minutes: While the minute section flashes, use the left/right buttons to adjust the minutes (press and hold for faster adjustment). Short press the TIME button to confirm and move to the next setting.
3. Setting year, day, and month: Set the day, month, and year (four digits). Adjust each while its section is flashing on the display using the left/right buttons (press and hold for faster adjustment). Confirm each selection with a short press of the TIME button before moving to the next. After the year is set, the device will return to time display mode.

PLEASE NOTE

• If you don’t press any buttons for 10 seconds while setting the clock, it will automatically save your settings and return to time display mode.
• The clock’s date is preset to January 1st, 2024.
• Once you set the date, the day of the week will appear automatically.

Setting the alarm

Press and hold the ALARM button to enter the alarm setting mode. The setting sequence is: hour > minutes > sound > volume.

1. Setting hour: After entering the alarm setting mode, the hour section will start flashing. Use the left/right buttons to adjust the hour (press and hold for faster adjustment). Short press the ALARM button to confirm and move to the next setting.
2. Setting minutes: While the minute section flashes, use the left/right buttons to adjust the minutes (press and hold for faster adjustment). Short press the ALARM button to confirm and move to the next setting.
3. Setting alarm sound: While the alarm is sounding and a number is flashing on the display, use the left/right buttons to adjust the alarm sound. You can choose from 6 different sounds. Short press the ALARM button to confirm your selection, and move to the next setting.
4. Setting volume: While the alarm is sounding and the volume level is flashing on the display, use the left/right buttons to adjust the volume. Short press the ALARM button to confirm and return to time display mode.

After the alarm is set, it is turned on by default. The alarm indicator will show on the display.

Turning the alarm off / on: In time display mode short press the ALARM button to turn the alarm off. The alarm indicator will disappear from the display. To turn the alarm back on short press the ALARM button again. The screen will display the alarm time for 2 seconds before returning to the time display mode with alarm indicator .
Activating the snooze function: While the alarm is sounding, tap anywhere on the silicone body to activate the snooze function. The snooze indicator will appear on the display. After 3 minutes, the alarm will sound again. The snooze function can be activated up to 6 times after the first alarm sounds.

PLEASE NOTE

• If you don’t press any buttons for 10 seconds while setting the alarm, the device will automatically save your settings and return to time display mode.
• When the alarm is set, the night light will begin to gradually increase in brightness ten minutes before the set time. When the alarm time is reached and the alarm goes off, the time will flash on the display and the night light will be at 100% brightness.
• The alarm will sound for 5 minutes. To stop the alarm, short press any button.

 Operating the night light

The built-in night light is activated by a motion sensor that responds to shaking movements. Tap anywhere on the silicone body to turn the night light on, off or change the brightness. The setting sequence is:
On at 30% brightness > 60% brightness > 100% brightness > off

PLEASE NOTE
The display will show the night light indicator while the night light is on helping you prevent accidentally overlooking an activated night light.

Disposal

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2012/19/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner. Empty, old batteries must be disposed of at battery collection points by the consumer. You can find out more information about the disposal of devices or batteries produced after 6 January 2006 from your local waste-disposal service or environmental authority.

Drain the battery completely before disposal.

Notes on cleaning

• Before cleaning the device, disconnect it from the power supply (remove plug)!
• Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.
• Store the alarm clock in a dry enviroment.

 Warranty & Service

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms

Contact

Bresser GmbH Gutenbergstraße 2 46414 Rhede · Germany
www.bresser.de
@BresserEurope

Errors and technical changes reserved.
Manual_9810103_Wecker-Maus_de-en_DIEMAUS_v072024a

References

• konsoleH :: Login

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>