Die Maus 9810100 The Mouse Weather Station for Children Instruction Manual

Die Maus 9810100 The Mouse Weather Station for Children

Specifications :

• Product: Wetterstation
• Art. No.: 9810100
• Languages: DE, EN, FR, NL, ES
• Manual Download: www.bresser.de/download/9810100
• Service & Warranty: www.bresser.de/warranty_terms

Product Usage Instructions

General Warnings:

1. The blinking light serves as a signal to quickly locate the Wetterstation outdoors.
2. Insert the batteries ensuring the correct polarity (+ and -).
3. Replace the battery compartment cover and tighten the screws.

Parts Identification:

1. Wind cups
2. Battery indicator
3. ON/OFF/CLR button
4. UNITS button
5. AVG/MAX button
6. MODE button
7. Temperature sensor
8. LCD display

Wind Speed Measurement:
The Wetterstation measures wind speed in the following units:

• Knots
• mph (Miles per hour)
• km/h (Kilometers per hour)
• m/s (Meters per second)

Measurement Range:

• 0.5 ~ 35 Knots
• 0.6 ~ 40.3 mph
• 1.0 ~ 64.8 km/h
• 0.3 ~ 18 m/s

Temperature Measurement:
The Wetterstation allows you to switch between temperature measurement modes.

Assembly Instructions for Wind Speed Meter:
To assemble the wind speed meter:

1. Attach the three wind cups to the rotating unit as shown in the diagram, ensuring they face the same direction.
2. Insert 3 AAA batteries into the wind speed meter, paying attention to the correct polarity.
3. Replace the battery compartment cover and tighten the screws.

Disposal:
Please refer to the product manual for proper disposal guidelines.

Warranty & Service:
For warranty and service information, visit the provided link.

FAQ:

• Q: How do I change the measurement units?
  A: Use the UNITS button to toggle between different measurement units for wind speed and temperature.

• Q: What type of batteries does the wind speed meter use?
  A: The wind speed meter operates on 3 AAA batteries.

• Q: Where can I find additional experiments related to the Wetterstation?
  A: Refer to the provided link for Experiment details and additional information.

www.bresser.de/download/9810100

www.bresser.de/warranty_terms

Operating Instructions

• WARNING! Not for children under three years. Choking hazard – small parts. Contains functional sharp edges and points!
• WARNING! Children under eight years can choke or suffocate on uninflated or broken balloons. Adult supervision required. Keep uninflated balloons from children.
• Discard broken balloons at once. Made of natural rubber latex.
• ATTENTION: Only suitable for children of at least 8 years of age. Instructions for parents or other responsible persons are enclosed and must be followed. Keep packaging as it contains important information.

GENERAL WARNINGS

• Choking hazard — This product contains small parts that could be swallowed by children. This poses a choking hazard.
• Risk of electric shock — This device contains electronic components that operate via a power source (batteries). Only use the device as described in the manual, otherwise you run the risk of an electric shock.
• Risk of fire/explosion — Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion.
• Risk of chemical burn — Keep batteries out of the reach of children! Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
• Leaking battery acid can lead to chemical burns. Avoid contact of battery acid with skin, eyes and mucous membranes. In the event of contact, rinse the affected region immediately with a plenty of water and seek medical attention.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it is not to be used for a long period of time, or if the batteries are empty!
• Never recharge normal, non-rechargeable batteries. This could lead to explosion during the charging process.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged.
• Tools with sharp edges are often used when working with this device. Because there is a risk of injury from such tools, store this device and all tools and accessories in a location that is out of the reach of children.
• Keep instructions and packaging as they contain important information.

Package Contents

• 1 weather station case
• 1 wind speed meter with 3 wind cups
• 1 rain gauge
• 1 wind vane
• 2 measuring cups
• 1 pH scale
• 20 pieces of pH paper
• 1 pressure scale card
• 1 plastic tube
• 1 compass
• 1 magnifying glass
• 2 collecting vials
• 1 measuring cylinder
• 1 towel
• 1 plastic pipette
• 1 pair of tweezers
• 3 cotton balls
• 4 pieces of rubber bands
• 6 pieces of bag ties
• 1 rubber ring
• 1 stopper
• 2 rubber balloons
• 1 nameplate
• 1 notepad
• 1 activities guide

Parts of the weather station

1. Wind speed meter (Anemometer)
2. On/off switch for blinking light
3. Blinking light
4. Accessories storage compartment
5. Rain gauge
6. Battery compartment
7. Wind vane ****

The blinking light is used as a beacon to locate the weather station outdoors.

Setting up the weather station

1. Attach the rain gauge to the side of the weather station case.
2. Assemble the wind speed meter (see section “Assembling the wind speed meter”) and put it in the holder of the weather station case.
3. Install the wind vane on the top of the case.

Battery installation of the blinking light

The blinking light requires 2 AA size batteries.

1. Unscrew the cover of the battery compartment on the weather station case with a screwdriver.
2. Install the batteries according to the polarity indicated.
3. Replace the cover of the battery compartment and tighten the screw.

The wind speed meter
In addition to wind speed, this device can also measure temperature.

Name of Parts

1. Wind cps
2. Power indicator
3. ON/OFF/CLR Button
4. UNITS Button
5. AVG/MAX Button
6. MODE Button
7. Temperature Sensor
8. LCD Display

ON/OFF/CLR Button

• Press to turn on the device. Device will turn off automatically if no key is pressed for 3 minutes.
• Press to clear the stored maximum value of wind speed or temperature when it is being displayed.
• Press and hold for 2 seconds to power off the device.

UNITS Button
Press to change the unit of measure.

Wind speed:

Temperature:

• AVG/MAX Button
  Press to select among average (AVG), maximum (MAX) or current data of wind speed or temperature.

• MODE Button
  Press to select between wind speed or temperature measurement.

• Assembling the wind speed meter
  Fit and secure the three wind cups on the rotating unit as shown. Make sure all of them are installed in the same direction.

Battery installation

The wind speed meter requires 3 AAA size batteries.

1. Unscrew the battery cover on the back of the device with a screwdriver.
2. Install the batteries according to the polarity indicated.
3. Replace the battery cover and tighten the screw.

The LCD Display

1. Beaufort Scale: Each segment of the arrow represents one unit.
2. Data
3. Wind speed mode indicator:
4. ON: Wind speed mode
5. OFF: Temperature mode
6. Wind speed measurement unit:
7. m/s: Meters per second
8. km/h: Kilometers per hour
9. mph: Miles per hour
10. knots: Nautical Miles per hour
11. Maximum indicator: Showing maximum value
12. Average indicator: Showing average data
13. Temperature in degree Celsius
14. Temperature in degree Fahrenheit

Download Booklet with 17 Experiments:
www.bresser.de/download/9810100

What is Weather?

• We live and breathe in a blanket of air known as the atmosphere. The atmosphere is constantly moving and changing all around the earth. These changes are called the weather.
• No matter if it is rainy, snowy, stormy, or warm and sunny, weather affects everyone all the time! That is why the science of weather, or meteorology, is so important! Scientists called meteorologists study patterns in the weather and try to forecast, or predict, what it is going to be like in the future. As we gain more understanding about weather and with advances in technology, these predictions have become more accurate.
• When we talk about the weather, we are actually describing the conditions in the atmosphere and the air around us at a particular moment. If you look outside now you might see that the weather is cloudy or sunny, or that it is wet or windy.
• Weather is made up of different things, such as:
  • Wind direction
  • Wind force
  • Precipitation (rain, snow)
  • Temperature
  • Sunshine
  • Cloud
• This weather station provides the necessary instruments for you to record these weather elements and make your own weather forecast.

DISPOSAL

• Dispose of the packaging materials properly, according to their type (paper, cardboard, etc). Contact your local waste disposal service or environmental authority for information on the proper disposal.
• Do not dispose of electronic devices in the household garbage! As per the Directive 2012/19/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
• Empty old batteries must be disposed of at battery collection points by the consumer. You can find out more information about the disposal of devices or batteries produced after 01.06.2006 from your local waste disposal service or environmental authority.
• In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please pay attention to dispose of your used batteries as required by law – at a local collection point or in the retail market (a disposal in domestic waste violates the Battery Directive).
• Batteries that contain toxins are marked with a sign and a chemical symbol. „Cd“ = cadmium, „Hg“ = mercury, „Pb“ = lead.

EC Declaration of Conformity
Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/9810100/CE/9810100_CE.pdf

UKCA Declaration of Conformity
Bresser GmbH has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/9810100/UKCA/9810100_UKCA.pdf

Bresser UK Ltd.
Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Warranty & Service

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required. You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

© I. Schmitt-Menzel / Friedrich Streich WDR mediagroup GmbH
Contact
Bresser GmbH Gutenbergstraße 2 46414 Rhede · Germany
www.bresser.de
@BresserEurope

Errors and technical changes reserved.

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>