PowerUC SCT023R 50A Split Core Current Transformer Installation Guide
- August 26, 2024
- Poweruc
Table of Contents
PowerUC SCT023R 50A Split Core Current Transformer
Specifications
- Model: SCT023R
- Input Current: 50mA – 100mA
- Output Current: 20mA – 100mA
- Turns Ratio: 1:1000 – 1:6000
- Accuracy: 0.5%
- Sampling Resistance: 10 – 100
FAQs
- Q: Can the product be used with higher input currents?
- A: The product specifications indicate the recommended input current range. Using currents outside this range may affect performance and accuracy.
- Q: Is it possible to modify the device for specific applications?
- A: As stated in the product manual, modifications to the device may void the warranty and are not recommended without prior consultation with the manufacturer.
Installation Diagram
Primary threading method（firing line）
- Open the buckle
- Open upward
- Put in lead wire
- Fasten the buckle
Characteristic
- Safety lock buckle, easy installation
- Cable output
- The length can be customized
- Free hanging (In-Line) Mounting
Product Application
- Portable instrument
- Household metering
- Monitoring the load of the machine
Product advantage
- Small volume， Lightweight
- Low cost
- High turns， high precision
Typical Technical Index
- Material of core Laminated silicon steel
- Working voltage Phase voltage≤720V
- Working temperature 30 C ~+65C
- Storage temperature 40C~+85 C
- Frequency range 50Hz~ 60Hz
- Waterproof grade IP00
- Dielectric strength Input (bare conductor) /output AC 800V/1 min 5mA 50Hz output/outer shell AC 3.5KV/1min 5mA 50Hz)
- Weight 103g
Electrical Parameters
The following parameters are typical values. The actual values shall be subject to the actual measurement of the product)
Statement：
As our products are constantly being improved and updated, we reserve the right to modify the content of this specification at any time without prior notice.
Dimensions
Dimensions: (in:mm‡0.5)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>