Juniper CV-3 4-Person Meeting Pod Installation Guide

Juniper CV-3 4-Person Meeting Pod

Product Information

Specifications

• Model: CV-3
• Product Name: 4-Person Meeting Pod
• Capacity: 4 persons
• Material: Steel, Panels
• Assembly Required: Yes
• Power Supply: Main Power Connection

Product Usage Instructions

1. Secure Connecting Steel Dowels to Panels
   Insert connecting steel dowel plate into marking hole and insert four 3/4 screws through flat plate to secure. Repeat for all 4 steel dowels.

2. Insert Steel Dowels into Joint Holes
   Align steel dowels flush with joint holes on adjacent panels. Push against outer walls of the pod until panels are flush.

3. Secure Panels
   Adjust panel bracket attached to the bottom of the panel so the open end fits around the stand-alone bolt on the bottom of the adjacent panel

4. Connect Main Power
   Assemble connector joint by securing male and female halves together and secure with connector clips on top and bottom of the assembly.

Frequently Asked Questions (FAQ)

• Q: How many people can comfortably fit inside the meeting pod?
  A: The meeting pod is designed for 4 persons to comfortably sit inside.

• Q: Is the table included in the meeting pod package?
  A: Yes, the table is included and can be securely attached to the back panel of the pod following the provided instructions.

4-Person Meeting Pod

General Installation Guide

1. Secure Connecting Steel Dowels to Panels
   Insert connecting steel dowel plate into marking hole and insert four 3/4” screws through flat plate to secure. Repeat step for all 4 steel dowels.

2. Insert Steel Dowels into Joint Holes
   Line up steel dowels so that they are flush with joint holes on adjacent panel. Push against outer walls of pod until panels are flushed.

3. Secure Panels
   Adjust panel bracket, attached to bottom of panel, so open end fits around stand-alone bolt on bottom of adjacent panel.

4. Connect Main Power
   Assemble connector joint by securing male and female halves together and secure with connector clips on top and bottom of assembly.

5. Secure Connecting Steel Dowels to Top Panel
   Insert connecting steel dowel plate into marking hole on bottom side of top panel and insert four 3/4” screws through flat plate to secure. Repeat step for all 10 steel dowels.

6. Connect Power to Top Panel
   Assemble connector joint by securing male and female halves together and secure with connector clips on top and bottom of assembly. Once connected, tuck completed assembly into slot at top of side panel.

7. Secure Top Panel
   Line up steel dowels so they are flush with joint holes on adjacent panel. Push against outer walls of pod until panels are flushed.

8. Place Seats Inside Pod
   Tilt seat at a 45 degree angle. Slide into pod while tilting seat back so seat sits flat on floor. Repeat for other side.

9. Secure Leg to Table
   Secure 4 screws through pre-drilled table base holes and into bottom of table surface.

10. Secure Table to Back Panel of Pod
    Secure table bracket to back panel using 3 bolts. Once secure, place table over bracket, lining up pre-drilled holes on bottom of table surface and secure.

1-866-999-0955 | hello@juniperoffice.com | juniperoffice.com
© 2023 Juniper Office | Version 23.0.0

References

• Juniper | Office Furniture for the Entire Workspace

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>