JVC HA-A30T2 Wireless Headphones User Manual

August 23, 2024
JVC

JVC HA-A30T2 Wireless Headphones

Product Information

Product Specifications:

  • Frequency Response: 20 Hz – 20,000 Hz
  • Operating Temperature: 5°C – 40°C
  • Storage Temperature: 5°C – 35°C
  • Water Resistance: IPX4
  • Supported Profiles: A2DP/AVRCP/HFP
  • Charging Interface: USB
  • Earbud Sizes: XS/S/M/L
  • Number of Earbuds: 2

Product Usage Instructions

Charging:

  1. Connect the charging case to a power source using the provided USB cable.
  2. Place the earbuds in the designated slots in the charging case for charging.
  3. The LED indicators on the case will show the charging status of the earbuds.

Pairing:

  1. Ensure the earbuds are charged.
  2. Remove the earbuds from the case and they will automatically enter pairing mode.
  3. Go to your device’s Bluetooth settings and select ‘HA-A30T2’ to pair.

Listening to Music:

  1. Once paired, play music on your device.
  2. The earbuds will deliver high-quality sound with a wide frequency response.

Frequently Asked Questions

Q: How do I reset the earbuds?

A: To reset the earbuds, put them back in the case and hold the button on the case for 10 seconds until the LED flashes.

Q: Are the earbuds waterproof?

A: The earbuds have an IPX4 water resistance rating, making them sweat and splash-proof but not suitable for submersion in water.

Q: How do I change the earbud tips?

A: Gently twist and pull off the existing earbud tips and replace them with the desired size included in the package.

ATTENTION:

  • The product you have purchased is powered by a recyclable rechargeable battery.
  • Please call 1-800-8-BATTERY for information on how to recycle this battery.

For Europe and the United Kingdom

For Europe

Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding Radio and RoHS. European representative of JVCKENWOOD Corporation is JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY.

For the United Kingdom

Dear Customer,
This apparatus is in conformance with the valid United Kingdom regulations and standards regarding Radio and RoHS. United Kingdom representative of JVCKENWOOD Corporation is JVCKENWOOD U.K. Limited, First Floor, Gleneagles, the Belfry, Colonial Way, Watford, Hertfordshire WD24 4WH, UNITED KINGDOM.

Declaration of conformities

Declaration of conformities (For Europe)

  • Hereby, JVCKENWOOD declares that the radio equipment [HA-A30T2] complies with Directive 2014/53/EU.
  • The full text of the EU declaration of conformity is available at the following internet address: (https://www.jvc.net/euukdoc/).

For the United Kingdom

  • Hereby, JVCKENWOOD declares that the radio equipment [HA-A30T2] complies with the relevant statutory requirements.
  • The full text of the declarati on of conformity is available at the follow ing internet address: (https://www.jvc.net/euukdoc/).

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. This product contains a rechargeable battery. Contact JVCKENWOOD’s authorized dealer for disposal.

WARNING

  • Do not listen at high volume for an extended period. Do not use it while driving or cycling.
  • Pay special attention to traffic around you when using the headphones outside.
  • Failure to do so could result in an accident.
  • This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
  • This product contains a rechargeable battery, which is not replaceable.
  • The danger of explosion is if the user replaces the battery. Do not replace the battery user’s own self.
    • To prevent possible hearing damage, do not listen at high volume levels for long periods.

Warnings for battery
Please do not handle the battery in the following manners.

It can lead to an explosion or leakage of flammable liquids and gases.

  • Dispose in fire, discard, crush, or cut
  • Leave in extremely high-temperature environment
  • Leave in extremely low-pressure environment

BLUETOOTH SPECIFICATION

  • Frequency range: 2.402 GHz – 2.480 GHz
  • Output power: +x.x dBm (MAX), Power Class 1

For U.S.A. and Canada

Hearing Comfort and Well-Being

  • Do not play your audio at a high volume. Hearing experts advise against continuous extended play.
  • If you experience a ringing in your ears, reduce volume or discontinue use.

Traffic Safety

  • Do not use it while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
  • You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
  • Do not turn up the volume so high that you cannot hear the sound around you.

FCC STATEMENT

For U.S.A.

Supplier’s Declaration of Conformity

  1. Model Number: HA-A30T2
  2. Trade Name: JVC
  3. Responsible party: JVCKENWOOD USA Corporation
  4. Address: 1440 Corporate Drive, Irving, TX 75038
  5. Telephone Number: 678-449-8879

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

For Canada
CAN ICES-3 (B)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

For U.S.A. and Canada
The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. HA-A30T2 has been tested and found to comply with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules.

For Customer Use:

  • Enter the Model No. and Serial No. (on the charging case) below.
  • Retain this information for future reference.
    • Model No.
    • Serial No.

Manufacturer

JVCKENWOOD Corporation
3-12,Moriya-cho,Kanagawa-ku,Yokohama-shi, Kanagawa, 221-0022, JAPAN.

  • IC: 11136A-HAA30T2
  • FCC ID: 2ALVK-HAA30T2

How To Use

  1. Remove

  2. Make sure to charge the earphones before use.

  3. During charging, the indicators flash. When charging is complete, all indicators turn off.

  4. Charging time: Approx. x.x hours (when charging the earphones and charging case at the same time)

  5. For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the

    • BLUETOOTH device, and select this unit from the device list.

    • For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the

    • BLUETOOTH device, and select this unit from the device list.

    • For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the

    • BLUETOOTH device, and select this unit from the device list.

    • For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the

    • BLUETOOTH device, and select this unit from the device list.

    • For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the

    • BLUETOOTH device, and select this unit from the device list.

    • For some Android devices, perform connection by following the instructions on the screen of the BLUETOOTH device. For other devices (iOS, etc.), turn on the BLUETOOTH function on the BLUETOOTH device, and select this unit from the device list.

    • Flashes slowly

  6. Ensure the “JVC” logo is on the upper side, and fit it to your ear by adjusting the position.

  7. Operation

After using the earphones, place them back into the charging case.

For detailed operations, troubleshooting, and information on the European Guarantee, please refer to the user manual.

https://manual3.jvckenwood.com/accessory/headphones/global/

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

© 2024 JVCKENWOOD Corporation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals