Telpo T10 Ticket Validator User Guide

Telpo T10 Ticket Validator

Product Usage Instructions

Antenna Usage

• Ensure that the antenna of the product is always at least 0.2m away from your body during normal use to maintain optimal performance and compliance with safety regulations.

Compliance and Modifications

• Any changes or modifications to the product that are not expressly approved by the responsible party for compliance could void your authority to operate the equipment. Please refrain from making unauthorized alterations to the device.

FCC Rules and Operation

• Operation of this device is subject to FCC Part 15 rules, which include the conditions that the device must not cause harmful interference and must accept any interference received. Ensure that the product is operated in accordance with these regulations.

Radiation Exposure Limits

• This equipment complies with FCC radiation exposure limits for uncontrolled environments. It is recommended to install and operate the equipment with a minimum distance of 25cm between the radiator and your body to ensure safety.

FAQ

• Q: How far should the antenna be from my body during product use?
• A: The antenna should be at least 0.2m away from your body under normal use conditions to ensure proper operation and compliance.
• Q: Can I make changes or modifications to the product?
• A : Any changes or modifications not expressly approved by the responsible party for compliance could void your authority to operate the equipment. It is recommended to avoid unauthorized alterations.

Bracket installation

1. Install the silicone sheet to attach the pipe and bracket.
2. Use screws to secure the fixed bracket on the pipe.
3. The bracket and the device are locked together by screws.
4. Install the holder and lock the device.

Notes:
The centeral connector should be plugged in before installing the device.

Bracket installation

1. Unlock the device and uninstall the holder.
2. Uninstall the fixed bracket.

Boot up the device

1. Turn the switch to ON status.
2. Power on the device.

Notes:

1. The centeral connector should be plugged in before installing the device.

Centeral Connecter

• During the device assembly, the connecter will be shown in the back-casing. Several signals, ports, and power go through it, as detailed for information on the following illustration

Note : The device uses using M12 aviation connector.

For CE

Specification

Appearance

• Indicators: Provide instructions during trading
• NFC: For card information trading
• Scanner: For scanning payment information

Holder

• For holding the machine in place

Key switch

• Press: wake up the screen and
• lock the device

Key

• Use to unlock the device

Power key

• For booting the device.

Functional Key

• For burning the firmware.

SIM Card Slots/PSAM Card Slots

• Note: To prevent system error, please make sure the device is turned off when you insert or remove the SIM cards.

Environmental/Material

• Operating temperature: -20°C ~ 60°C
• Storage temperature: -40°C ~ 70 C
• Relative humidity: 5%RH – 98%RH
• 1.5 M Anti-Drop

SIM Card & PSAM Card Installation
SIM Card, PSAM Card Installation and Uninstallation

1. Take out the card cover, and the card sockets will be shown.
2. The top card slot is a SIM card socket and the psam card socket is on under.

Installation process

Note: In the process of removing and placing the card, please reduce the force slightly.

Card Reading

NFC tag put the NFC tag over the case of the device.
Note: you need to move the card chip closer to the center of the NFC icon.

1D/2D Barcode Reading
Put paper ticket or Mobile phone to the reading area.

Indicator adjustment

Indicators

Each indicator light can be individually controlled, with a total of three colors that can be adjusted, including red, green and blue. There are three kinds of logic used when using indicator lights

1. All green lights – successful payment.
2. All red lights – failure to pay.
3. The lights turn on from left to right – generally used to show the progress of transactions.

Accessories

Before using the smart terminal, ensure that all the accessories above are included in the package. If you have any problems, please contact the services provided of the distributors.

Statements

The Company does not assume responsibilities for the following actions:
Damages caused by use and maintenance without complying with the conditions specified in this guide. The Company does not assume any responsibility for the damages or problems caused by optional items or consumables (rather than the initial products or approved products of the company). The customer is not entitled to change or modify the product without our consent. The product’s operating system supports the official systemupdates, but if you change the operating system into a third-party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats.

Disclaimer
As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document. The company also reserves the righe toaiter this specification without prior notice.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 25cm between the radiator& your body.

The antenna of the product, under normal use condition, is at least 0.2m away from the body of the user.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>