CMA DISHMACHINES EST-66 Conveyor Machines Drain Water Tempering Kit Installation Guide
- August 22, 2024
- CMA Dishmachines
Table of Contents
CMA DISHMACHINES EST-66 Conveyor Machines Drain Water Tempering Kit
Product Specifications
- Product Name: EST Conveyor Machines Drain Water Tempering Kit
- Model Numbers: PN13475.03 (Factory Installed), PN13476.03 (Field Installed)
- Assembly: Drain Water Tempering Valve Assembly
Product Usage Instructions
Initial Installation:
- Machine ships without the DWT valve Assembly installed.
- Install the DWT assembly in the drain line between the machine and floor sink.
- Attach the DWT to the left or right side of the drain manifold, closest to the floor sink.
- Remove the black plug.
- Connect the cold water line to the in-line check valve. Installer is responsible for water connection.
- Cold water connections are not supplied by CMA Dishmachines.
- Turn on the cold water and check for leaks.
EST-66 Drain Water Tempering Assembly:
- This assembly includes the Drain Water Tempering Valve Assembly effective from 03-2023.
FAQ
- Q: Is the DWT valve Assembly pre-installed?
- A: No, the machine ships without the DWT valve Assembly installed. It needs to be installed by the installer.
- Q: Where should the DWT assembly be attached?
- A: The DWT assembly should be attached to the left or right side of the drain manifold, always install closest to the floor sink.
- Q: Who is responsible for connecting the cold water line?
- A: The installer is responsible for connecting the cold water line to the in-line check valve. Cold water connections are not supplied by CMA Dishmachines.
Installation Instructions
Drain Water Tempering Kit – Initial Installation Instructions
- Machine ships with CMA Drain Water Tempering (DWT) valve Assembly NOT installed. Installer to install the DWT assembly in the drain line between the machine and floor sink.
- Example of DWT attached to left or right side of the drain manifold. Always install closest to floor sink.
- Attached to left side of Drain Manifold
- Attached to right side of Drain Manifold
- Remove black plug.
- Connect cold water line to the in-line check valve. Installer responsible for water connection.
- Cold water connections not supplied by CMA Dishmachines.
- Turn on cold water and check for leaks.
PRODUCT DESCRIPTION
MODEL EST-66 Drain Water Tempering Assembly
Buy Parts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>