PawHut D08-040V00 Anti Skid and Insulated Elevated Feeder Installation Guide
- August 22, 2024
- PawHut
Table of Contents
PawHut D08-040V00 Anti Skid and Insulated Elevated Feeder
Specifications
- Model: IN220800253V01_GL
- Version: D08-040V00
- Language: English (EN)
- Country: United States / Canada (US_CA)
- Dimensions:
- A: 16 units
- B: 16 units
- C: 2 units
- D: 1 unit
- E: 6 units
Product Usage Instructions
- Unpack the product carefully.
- Refer to the user manual for detailed instructions.
- Connect the product to a power source using the provided cable.
- Turn on the product by pressing the power button.
- Follow the on-screen prompts to set up the product.
- Enjoy using the product for your intended purpose.
FAQs
- Q: How do I reset the product to factory settings?
- A: To reset the product to factory settings, navigate to the settings menu, select “Reset,” and confirm the action.
- Q: What should I do if the product malfunctions?
- A: If the product malfunctions, refer to the troubleshooting section in the user manual or contact customer support for assistance.
- Q: Can I use third-party accessories with this product?
- A: It is recommended to use accessories approved by the manufacturer to ensure compatibility and safety.
PRODUCT INTRODUCTION
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
- Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual.
- If you have any questions, please contact our customer care center, Our contact details are below:
| Country | Phone | |
|---|---|---|
| us | 001-877-644-9366 |
customerservice@aosom.com
CA| 416-792-6088|
customerservice@aosom.ca
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
DE| 0049-0( 40)-88307530| service@aosom.de
FR| 0033-1-84166106| aosom@mhfrance.fr
ES| 0034-931294512|
atencioncliente@aosom.es
PT| 0034-931294512|
info@aosom.pt
IT| 0039-02494 71447| clienti@aosom.it
USING CAM LOCK AND QUICKFIT
QUICK FIT: Tighten quick fit until the shoulder is flush with the panel. Do not overtighten or under-tighten.
CAM LOCK: When fitting the cam lock, ensure the starting position is correct before you insert the connecting quickfit.
- The quickest head should be in the center of the cam lock when the two panels are joined.
- Turn the cam lock clockwise to tighten.
PARTS
HARDWARE
INSTALLATION INSTRUCTION
DONE
CONTACT INFORMATION
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
- IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>