EGLO 901078 Pantete Solar Spike Lamp Instructions
- August 22, 2024
- EGLO
Table of Contents
EGLO 901078 Pantete Solar Spike Lamp
Installation and Usage Instructions
Art.Nr.: 901078
Website: www.eglo.com
Installation Steps
- Ensure the ground is level and free of obstructions.
- Insert the stake into the ground, ensuring it is firmly in place.
- Attach the light fixture to the stake.
- Ensure the light is positioned correctly and securely.
- Check the solar panel is not obstructed by trees or other objects.
- Allow 6-8 hours of sunlight for optimal charging.
Operational Modes
The light has three operational modes
- Mode 1: The light operates at 100% brightness when motion is detected. It turns off after 45 seconds of no motion.
- Mode 2: The light operates at 30% brightness continuously during the night.
- Mode 3: The light remains off.
Specifications
| Frequency | 5725-5875 MHz |
|---|---|
| Max Output | -10.89 dBm |
Sensor Range
The sensor has a maximum range of 6 meters and a detection angle of 360
degrees. It is optimized for detecting motion at a height of 1.7 meters.
FAQ
-
How long does the light need to charge?
The light requires 6-8 hours of sunlight for a full charge. -
What should I do if the light is not working?
Ensure the solar panel is not obstructed and that the light has had sufficient time to charge. Check the operational mode settings. -
Can the light be used in all weather conditions?
Yes, the light is designed to be weather-resistant. However, ensure the solar panel is kept clean for optimal performance.
INSTALLATION
Art.Nr.:901078
www.eglo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>