QAZQA 107607 Katrijn FL White Design Outdoor Floor Lamp Instruction Manual

August 22, 2024
QAZQA

QAZQA 107607 Katrijn FL White Design Outdoor Floor Lamp

Specifications

  • Model: Katrijn FL White
  • Power Supply: 220-240V~
  • Frequency: 50Hz
  • Product Code: 107607
  • IP Rating: IP44
  • Dimensions: 110mm x 160mm x 280mm
  • Cable Length: 2000mm

Product Usage Instructions

  • The Katrijn FL White floor lamp is designed for indoor use only.
  • Please follow the instructions below to safely and effectively use the product:

Assembly

  1. Place the lamp base on a stable and flat surface.
  2. Insert the lamp stand into the base and tighten it securely.
  3. Attach the lampshade to the stand according to the provided instructions.

Installation

  1. Ensure the lamp is unplugged before installation.
  2. Place the lamp near a power outlet to avoid using extension cords.
  3. Insert the plug into the power outlet and switch on the lamp.

Maintenance

  • Regularly dust the lampshade and base with a soft, dry cloth to maintain its appearance.
  • Avoid using harsh chemicals or abrasive materials that may damage the finish.

FAQ

  • Q: Can I use a higher-wattage bulb than recommended?
  • A: It is recommended to use bulbs within the specified wattage range to prevent overheating and potential damage to the lamp.
  • Q: Is the lamp suitable for outdoor use?
  • A: No, the Katrijn FL White floor lamp is designed for indoor use only and has an IP44 rating suitable for indoor environments.

Features

Katrijn FL White 107607

Power

On/Off

Dimension

Installation Instructions

FLOOR VERSION

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference.

  1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
  4. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class Il: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by the wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
  11. Take note of the symbols when connecting wires:

WIRING

  • : Live conductor
  • : Earth conductor
  • : Neutral conductor

CONTACT

FittinQ B.V.

  • Smaragdweg 52, 5527 LB Hapert,
  • The Netherlands
  • www.qazqa.nl

FittinQ LTD

  • 55 Baker Street,
  • London, WIU 7EU
  • United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals