THORN E1-3-S Voyager Solid User Manual

THORN E1-3-S Voyager Solid

Specifications

• Model: E1/3-S
• Power Source: AC Mode, Battery connected
• Test Frequency: Monthly for Function Test, Annually for Duration Test
• LED Indicators: Red LED for Test, Green and Red LEDs for Inhibit Mode
• Battery Type: L-FePO4
• Battery Capacity: 3.2V, 1.6Ah for E1/3 and E1/3T; 3.2V, 6.4Ah for E1/3D and E1/3BC
• IP Rating: IP65
• Impact Protection: IK07
• Operating Voltage: 220-240V AC, 50/60Hz

Product Usage Instructions

Function Test
Perform a function test every 7 days by activating the test mode. The red LED indicator should light up for more than 1 second to indicate a successful test.

Durability Test
Conduct a durability test annually by activating the test mode. The LED indicators will show different patterns based on the test results.

Battery Replacement
If the backup duration is insufficient, replace the battery with the specified model and capacity mentioned in the manual.

Emergency Mode
In emergency mode or when there is no mains power or battery backup, specific LED indicators will illuminate to indicate the status of the system.

Address Identification Mode
For certain models, an address identification mode can beactivated for 10 seconds to assist in system configuration.

Battery Operation
In emergency mode or after a rest mode cycle, the system will  rely on battery power. Ensure the battery is functioning correctly for uninterrupted operation.

FAQ

1. Q: How often should I perform the function test?
   A: The function test should be conducted every 7 days to ensure system reliability.

2. Q: What should I do if the battery backup duration is not sufficient?
   A: If the backup duration falls short, replace the battery with the recommended specifications provided in the manual.

3. Q: How can I identify if the system is in emergency mode?
   A: Specific LED indicators will illuminate in emergency mode to indicate the status of the system. Refer to the manual for detailed information.

Instructions

NAME

• VOYAGER SOLID MS E1/3-S
• VOYAGER SOLID MS E1/3T-S
• VOYAGER SOLID MS E1/3D-S
• VOYAGER SOLID MS E1/3BC
• VOYAGER SOLID L MS E1/3-S
• VOYAGER SOLID L MS E1/3T-S
• VOYAGER SOLID L MS E1/3D-S
• VOYAGER SOLID L MS E1/3BC
• VOYAGER SOLID MS ECD
• VOYAGER SOLID P MS ECP
• VOYAGER SOLID P MS ELP
• VOYAGER SOLID MS ECC
• VOYAGER SOLID L MS ECD
• VOYAGER SOLID L P MS ECP
• VOYAGER SOLID L P MS ELP
• VOYAGER SOLID L MS ECC
• VOYAGER SOLID L P MS HP E1/3D
• VOYAGER SOLID L MS HP E1/3BC
• VOYAGER SOLID L MS HP ECD
• VOYAGER SOLID L P MS HP ECP

SPECIFICATIONS

• 23m, 1/3H, Manual test/ Manueller test 23m, 1/3H, AutoTest,
• 23m, 1/3H, DALI
• 23m, 1/3H, bas cD m W reless (Casamb )
• 26m, 1/3H, Manual test/ Manueller test 26m, 1/3H, AutoTest
• 26m, 1/3H, DALI
• 26m, 1/3H, bas cD m W reless (Casamb )
• 23m, CENTRAL, 220-240V AC/DC DALI 23m,
• CENTRAL, 220-240V AC/DC PLC 23m,
• CENTRAL, 48V DC PLC
• 23m, CENTRAL, 220-240V AC/DC BASIC
• 26m, CENTRAL, 220-240V AC/DC DALI 26m,
• CENTRAL, 220-240V AC/DC PLC 26m,
• CENTRAL, 48V DC PLC
• 26m, CENTRAL, 220-240V AC/DC BASIC
• 26m, 1/3H, DALI
• 26m, 1/3H, bas cD m W reless (Casamb ) 26m,
• CENTRAL, 220-240V AC/DC, DALI 26m,
• CENTRAL, 220-240V AC/DC, PLC

Mounting instructions

Important notices. Please, read first! Keep the instructions safe! Specifications are subject to change without notice! If you have questions, please contact the manufacturer.

• Including test dev ce
• Including rest mode
• Include ng nh b t mode
• H gh r sk task area lum na re
• W th non-replaceable lamp or
• battery: Automat c test fac l ty
• Safety s gn

Instructions for installation and operation!

The installation and commissioning of the luminaire as well as any modification to the luminaire may only be performed by authorized personnel (qualified electrician). National installation regulations must be observed. Before any work on the appliance is done, it must be disconnected from mains. Hot plug-in is not an option and may cause damage to the lamp or luminaire! The manufacturer is not liable for damages resulting from improper or faulty installation or operation or from unauthorized modifications to the luminaire. Caution, risk of electric shock! Specifications are subject to change without notice! If you have questions, please contact the manufacturer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>