tp-link Deco BE63 Whole Home Mesh Wi-Fi 7 System User Guide

: August 21, 2024
: tp-link

Table of Contents

tp-link Deco BE63 Whole Home Mesh Wi-Fi 7 System
Specifications
Product Usage Instructions
FAQs
About This Guide
Appearance
Set Up Your Deco
Troubleshooting
FCC
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link Deco BE63 Whole Home Mesh Wi-Fi 7 System

Specifications

Model: Deco BE63
Connectivity: 2.5 Gbps
Ports: Four 2.5 Gbps WAN/LAN ports, a USB port
Buttons: WPS button, Reset button
LED Indicator: Indicates various statuses

Product Usage Instructions

Appearance:
- Each Deco unit includes an LED indicator, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB port, a power slot, and a Reset button. The LED changes color to indicate different statuses.
Set Up Your Deco:
- Get the Deco App: Download the TP-Link Deco app on your iOS or Android device.
- Log in or Sign Up: Use your TP-Link ID to log in or create one if you don’t have it.
- Select Deco Model: Choose your Deco model within the app.
- Plug In Your Deco: Connect your Deco to the modem or Ethernet outlet and power it on.
- Wait for LED Status: Wait for the LED to pulse blue, indicating setup readiness.

FAQs

Q: What do the different LED colors on Deco indicate?
- A: The LED colors on Deco indicate different statuses:
- Pulse Yellow: Resetting
- Solid Yellow: Starting up
- Pulse Blue: Ready for setup
- Solid Blue: Setting up
- Pulse Green: Upgrading firmware
- Solid Green: All set up and connected
- Pulse Red: Satellite Deco disconnected from main Deco
- Solid Red: Issue detected
Q: How do I reset my Deco to factory default settings?
- A: Press and hold the Reset button for 1 second until the LED changes from pulsing yellow to solid yellow, indicating a successful reset.

About This Guide

This guide provides a brief introduction to BE10000 Whole Home Mesh Wi-Fi 7 System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.

Conventions

In this guide, the following conventions are used:

Convention	Description
Deco	Stands for Deco Whole Home Mesh Wi-Fi System/ Unit.
Underline	Hyperlinks are in teal and underlined. You can click to

redirect to a website or a specific section.

Teal| Key information appears in teal, including management page text such as menus, items, buttons and so on.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

More Info

Specific product information can be found on the product page at https://www.tp-link.com.
A Technical Community is provided for you to discuss our products at https://community.tp-link.com.
Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support.

Speed/Coverage/Device Quantity Disclaimer

Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications.
Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

MU-MIMO Disclaimer

Use of MU-MIMO requires clients to also support MU-MIMO.

IoT Compatibility Disclaimer

IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.

Seamless Roaming Disclaimer

Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device.

Appearance

Each Deco has an LED that changes color according to its status, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB port, a power slot, and a Reset button.

See the explanation below:
Tip: The product label can be found at the bottom of the product.

Set Up Your Deco

First let’s start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup.

Get the Deco app
- Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet.
Log in or sign up with TP-Link ID
- Open the app and log in with your TP-Link ID. If you don’t have a TP-Link ID, create one first.
- Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password.
Select your Deco model
- Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network.
Plug in your Deco
- Power off your modem. Connect your Deco to the modem and power them both on.
- If you don’t have a modem, connect your Deco directly to the Ethernet outlet.
Wait until Deco’s LED pulses blue
- Wait until your Deco’s LED pulses blue, then your phone/tablet will connect to the Deco’s default Wi-Fi automatically.
Specify your Deco’s location
- Select or custom a location for your Deco. The location will be used as the name of your Deco.
Connect your Deco to the internet
- Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.
Create your Wi-Fi network
- Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.
Create your 6GHz Wi-Fi network
- Set a network name and a password. These will be the name and password you use to connect your devices to the 6GHz Wi-Fi.
Keep your Deco up-to-date
- Set auto update time. This allows your Deco to automatically update to the latest firmware which provides better network experience.
Connect to your Wi-Fi network
- Connect your phone/tablet to the Deco’s Wi-Fi to continue the setup.
Setup complete
- Your Deco network is now up. You can connect your devices to the Deco network. Plug in the other included Decos, and they will automatically join the network within 2 minutes.

Troubleshooting

Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco.

If problems still exist, contact us: https://www.tp-link.com/support.

Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn’t find Deco”?
- Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM
Q2. What should I do if I fail to configure the satellite Deco and get stuck on “We couldn’t find another Deco”?
- Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4
Q3. What should I do if I fail to configure the main Deco and get stuck on “Testing Internet Connection”?
- Refer to the guide https://www.tp-link.com/support/faq/2239/
- Refer to the video https://youtu.be/OSUrGdWH-i0
Q4. What should I do if my wireless devices cannot connect to Deco?
- Refer to the guide https://www.tp-link.com/support/faq/2718/
Q5. What should I do if Deco suddenly lost internet access?
- Refer to the guide https://www.tp-link.com/support/faq/2428/
Q6. How can I find a suitable spot for my Deco?
- Refer to the guide https://www.tp-link.com//support/faq/1446/
Q7. What can I do if the Deco app isn’t working properly?
- Refer to the guide https://www.tp-link.com/support/faq/1456/

FCC

Authentication FCC Compliance Information Statement

Product Name: BE10000 Whole Home Mesh Wi-Fi 7 System
Model Number: Deco BE63

Component Name	Model
I.T.E Power Supply	T120250-2B4

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
To comply with FCC RF exposure compliance requirements, this grant applies to only Mobile Configurations.
The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC regulations restrict the operation of this device to indoor use only.
The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet.
Operation of transmitters in the 5.925-6.425 GHz band is prohibited for control of or communications with unmanned aircraft systems.
We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15.
There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

FCC Compliance Information Statement

Product Name: I.T.E POWER SUPPLY
Model Number: T120250-2B4

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Caution:

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 45cm between the radiator & your body.

Industry Canada Statement: CAN ICES-3 (B)/NMB-3(B)

Equipment name: BE10000 Whole Home Mesh Wi-Fi 7 System| | | | Type designation (Type) Deco BE63|
---|---|---|---|---|---
Unit| | | Restricted substances and their chemical symbols|
Lead| Mercury| Cadmium| Hexavalent| Polybrominated| Polybrominated
| (Pb)| (Hg)| (Cd)| chromium| biphenyls| diphenyl ethers
PCB| | | | (Cr+6)| (PBB)| (PBDE)
| ○| ○| ○| ○| ○| ○
| ○

−

| ○| ○| ○| ○| ○
| −| ○| ○| ○| ○| ○
| | ○| ○| ○| ○| ○
Note 1： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicates that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3：The “ − ” indicates that the restricted substance corresponds to the exemption.

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use a damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
The adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
Operating Temperature: 0°C~40°C (32°F~104°F)
This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices.
Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices.
If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.