TIE DOWN 73058 Tilt Back Pallet Carrier Instruction Manual

TIE DOWN 73058 Tilt Back Pallet Carrier

Product Specifications:

• Product Name: Tilt Back Pallet Carrier
• Part ID: 73058
• Usage: Moves various items such as insulation, rubber rolls, portable restrooms, water storage tanks, toolboxes, etc.
• Features: Rear wheels for tilt adjustment, large tires for easy movement, adjustable tilt back angle

Product Usage Instructions

Step 1: Assembling the Frame

1. Remove the pallet carrier frame from the shipping pallet and stand it upright at 90 degrees.
2. Locate the hardware kit and assemble the rear axle assembly as per Fig. 2-1.

Step 2: Attaching Tilt Back Brace

1. Locate the safety pins and tilt back brace from the hardware kit.
2. Align the tilt back brace with the mounting hole on the pallet carrier frame and adjust the tilt angle as needed.

Step 3: Installing Rear Wheels

1. Insert the rear wheel axle through the mounting hole on the rear axle assembly.
2. Attach the rear wheels using washers and cotter pins as shown in Fig. 3-2.

Step 4: Adjusting Handle Height

1. Adjust the handle height by engaging the snap buttons on the side of the pallet carrier frame.

Step 5: Setting Up Pallet Fork Assembly

1. Cut the cable ties securing the forks to the pallet frame.
2. Lower the pallet lifting forks assembly as indicated in Fig. 4-1 and secure with safety pins.

Frequently Asked Questions (FAQ):

• Q: What is the weight capacity of the Tilt Back Pallet Carrier?
  A: The weight capacity of the carrier is X lbs, ensuring it can transport a variety of items securely.

• Q: How do I adjust the tilt angle of the carrier?
  A: The tilt angle can be adjusted by changing the position of the tilt back brace, allowing for customization based on your needs.

Tilt Back Pallet Carrier

Part ID : 73058
The Tilt Pallet Carrier moves everything from insulation to rubber rolls; large tires allow easy movement on all decks. Rear wheels adjust to change tilt for easy control. The Tilt Back Pallet Carrier can also be used on job sites to transport portable restrooms, water storage tanks, tool boxes or just about anything else.

• Effortless maneuvering: Multi piece formed handle and multi axis casters provide easy movement on all surfaces.
• Enhanced Safety: pinned caster lock prevents caster from rotating and prevents cart from rolling down sloped surfaces.
• Durable tires: Flat-free tires provide reliable performance without the need for maintenance.
• Strong construction: All-steel frame ensures long-lasting durability.
• Adjustable tilt for better control.
• Safe and efficient transport solution

Specifications:

• 69” max. hight x 54” wide
• Fork length 32” x 33“ wide
• Pallet carrier weight: 200 lbs.
• Shipping weight 2 per pallet: 450 lbs.
• All steel, heavy-duty frame (2) 18” x 8.50” & (2) 8”x 6” flat-free tires
• Load limit: 800 lb

Online Instructions

WARNING

Serious injury or death may occur if this equipment is used for purposes other than intended. Tie Down provides the following instructions for the use and care of this equipment. It is the responsibility of the user to understand and convey proper instruction to any and all individuals who use this product

WARNING : This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Instruction #08434 (E1958

Pallet Carrier Installation

Step 1

1. Remove the pallet carrier frame from the shipping pallet. Stand the carrier upright at 90 degrees, the rear axle frame will hang down.
2. Locate the hardware kit and remove the rear axle assembly, cotter pin and 2 washers.
3. Place a washer over the axle assembly pin. Insert the rear axle assembly pin through the mounting hole located at the end of the rear axle frame.
4. Slide the washer over the axle pin and Binsert cotter pin, and split the cotter pin secure the axle assembly. As shown in Fig 2-1.

Step 2

1. From the hardware kit, locate 2 safety pins, the locking pull pin and the tilt back brace as shown in Fig. 2-2 shown right.
2. Align the tilt back brace with the lowest mounting hole on the pallet carrier frame. Once the Pallet Carrier has been fully assembled the degree of tilt back can be changed by raising the tilt back brace angle as shown right in Fig 2-2.
3. Working from the opposite end of the tilt back brace insert a safety pin through the brace and mounting tab on the rear axle frame. See Fig. 2-2 and 2-3

Step 3

1. Locate the rear wheel axle for the hardware kit. Insert the axle through the mounting hole located on the lower end of the rear axle assembly.
2. Remove the rear wheels from the box/pallet, locate 2 washers and cotter pins from the hardware kits.
3. Insert the wheel hubs over the axle. slide the washer over the axles and secure with the cotter pins. As shown in Fig. 3-2.
4. Split the cotter pin ends securing both wheels on the axle frame.

Step 4

1. From the shipping pallet, locate the left, right and center handle brackets as shown in Fig. 3-3.
2. Insert the short end of the left and right frames into the center frame bracket.
3. Press in the snap buttons so the handle frames slide into the center frame bracket.
4. Align the handle frame assembly with the pallet carrier frame. Insert the handle frame into the carrier frame.
5. Determine your working hight by sliding the hand frame up or down. Insert safety pins into the left and right side of the pallet carrier frame locking the handle into place.

Step 5

1. The pallet fork assembly ships with cable ties securing the forks to the pallet frame. Cut the cable ties.
2. Lower the pallet lifting forks assembly downward as shown in Fig. 4-1.

Step 6

1. Pull the pallet fork assembly outward while lowering the assembly downward.
2. The fork assembly will slide into the locking slots located at the bottom of the carrier frame as shown right.
3. Locate two safety pins from the hardware kit.
4. Insert safety pins into the mounting pin hole located closest to the wheel.
5. Secure the pin by pulling the clip over the pin end. Locking the fork assembly in place. See Fig. 4-3.

Safety Products Division
605 Stonehill Drive SW, Atlanta, Georgia 30336
800-241-1806
404-344-0000
www.tiedown.com ISO 9001:2015 Certification
Intellectual property of TIE DOWN Inc. ©2023 TIE DOWN, Inc.
Instruction #08434

References

• P65Warnings.ca.gov
• Tie Down | Custom Manufacturing Solutions for Roofing, Safety, Marine and Much More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>