Shenzhen 2BEQB-GD11 Original Wireless Bluetooth Earphones User Manual
- August 20, 2024
- Shenzhen
Table of Contents
Shenzhen 2BEQB-GD11 Original Wireless Bluetooth Earphones
Charging
Before the first use, the battery must be fully charged before use
- Connect the charger cable to the headphone jack.
- When charging, the indicator light shows a red light. When fully charged, the red light goes out, and the blue light shows a fully charged state.
Turn ON/OFF
- Power on Press and hold the multifunction button for about 5 seconds, the blue light will stay on for 1 second, and there will be a voice prompt “Power on” until the red and blue lights flash alternately, and the Bluetooth earphones are turned on.
- Shutdown: Press and hold the multifunction button for about 5 seconds, the red light will stay on for 1 second, and there will be a voice prompt of “shutdown”. At this point, the Bluetooth earphones will enter the shutdown state.
Operation Method
Reminder: Volume increase or decrease needs to be adjusted on the phone
Precautions For Charging
- Use a DC5 V charger like a computer’s USB port or a cell phone charger.
- The output voltage of the USB port ( Formal safety certification charger )
- The red light in the charging process
- Recharging and discharging will reduce the battery performance is a normal rechargeable battery .
Volume adjustment, playing music
- Volume: When making a call or playing music, adjusting the volume can only be done with the phone. Quickly press 5 times to switch between Chinese and English.
- Next track: When playing music, briefly press the multifunction key 3 times to switch to the next track.
- Play music: Short press the multifunction key to activate the music player on the phone, and short Press the multifunction key to play/pause.
- Music or call sound may be distorted when the battery is low.
- Kind reminder! This product supports 1A charging head charging, it is recommended not to use fast charging.
- Wireless 5.4.
Caller number
When a call is made, the Bluetooth headset will report the phone number, such
as 138000000.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>