Rowenta 12.60 NEO X-Force Flex Cordless Stick Vacuum User Guide

August 20, 2024
Rowenta

Rowenta 12.60 NEO X-Force Flex Cordless Stick Vacuum User Guide

EN INTRODUCING THE X-FORCE FLEX 12.60 NEO / 13.60

READ THE MANUAL CAREFULLY BEFORE FIRST USE TO MAKE THE BEST USE OF YOUR NEW VACUUM CLEANER

  1. EASY WASH FILTER
  2. SEPARATOR
  3. DUST CONTAINER
  4. FINE PARTICLE FILTER
  5. REMOVABLE BATTERY
  6. CHARGING BASE
  7. SOFA BRUSH
  8. CREVICE NOZZLE
  9. ANIMAL TURBO BRUSH

ASSEMBLY

CHARGING BASE SET UP

USING THE VACUUM CLEANER

YOUR VACUUM CLEANER SHOULD BE FULLY CHARGED BEFORE THE FIRST USE

POWER BUTTON ON/OFF
To turn your device on or off, press the start button.

BOOST TRIGGER
For intensive cleaning of hard floors and heavily soiled carpets.

AUTO FUNCTION
The vacuum cleaner features an AUTO function that adapts the power to different floor types. The X-Force Flex 12.60 Neo performs thousands of calculations and measurements during each floor detection, and so it is normal to have a reaction time of a few seconds between those floor transitions to optimize performance.

**CONTROL DISPLAY

**

Your appliance has 4 power modes for different tasks.
Change cleaning modes directly on the control display and adjust the power according to your needs.

  1. MANUEL MODE:
    ECO: For everyday use. Suitable for dirty soils and delicate surfaces: shelves, frames, curtains, etc.
    MAX: For vacuuming dust from hard floors and carpets.
    BOOST: For intensive daily cleaning of floors hard and very dirty carpets.
    At maximum power, the vacuum cleaner has a time of shorter operation.

  2. AUTO MODE:
    Adjust the power automatically depending on the type of floors.

  3. BATTERY:
    Allows to see the battery level when the vacuum cleaner is turned off.

  4. CLEANING ALERT:
    Vacuum cleaner to be cleaned when the light comes on.

SCAN WITH YOUR PHONE CAMERA OR QR READER TO WATCH HELPFUL VIDEO GUIDE ON HOW TO USE THE CONTROL DISPLAY

FLEX FUNCTION & ACCESSORIES

FLEX FUNCTION

Your appliance is equipped with Flex technology.
It allows you to reach the furthest areas under low height furniture effortlessly

**ACCESSORIES FOR SPECIFIC CLEANING PURPOSES

Your device has 2 integrated cleaning brushes. You can use them to vacuum the majority of your surfaces.
NB:** If you remove the accessories for cleaning, make sure that they are reattached properly before next use.

Use the crevice tool* to vacuum hard to reach places.

Use the sofa brush* to vacuum textiles like sofa, cur tains or mattress.

*Use the mini turbo brush to vacuum in-depth your sofas, mattress carpet or small rugs.

BATTERY & CHARGE


THE FULL BATTERY CHARGE TAKES 3 HOURS.

To charge your appliance, you have the choice between two options:

**OPTION 1

** Place the device on its previously installed charging base and plug it in.

**OPTION 2

** Remove the battery from the device by sliding it out, then insert the battery into its charging base and plug it in.

SCAN TO LEARN MORE ABOUT THE BATTERY AND ITS CHARGING


Flashing blue light:
the battery is charging.


Blue light off:
battery is charged


Flashing red light:
Please refer to the safety booklet.

BATTERY LEVEL

| |
---|---|---
ECO| Up to 60 min| Up to 32 min
MAX| Up to 32 min| Up to 26 min
BOOST| Up to 5 min| Up to 11 min

MAINTENANCE

EMPTYING THE DUST CONTAINER
The dust inside the container should not exceed the maximum level indicated.

CLEANING THE DUST CONTAINER

SCAN TO LEARN MORE ABOUT MAINTENANCE

CLEANING THE BRUSH

SCAN TO LEARN MORE ABOUT MAINTENANCE

**FILTER MAINTENANCE

** Clean your filter once a week for maximum efficiency. Replace your filter twice a year.
To buy a new one, look for Rowena part number ZR009014.

After cleaning the filter, if the indicator light on the filter stays on, check that the tube is not clogged.

**THE MOTOR FILTER MAINTENANCE

** Clean your motor filter after 6 months of use for maximum efficiency.
Replace your motor filter twice a year.
To buy a new one, look for reference Rowena ZR009015.

SCAN TO LEARN MORE ABOUT MAINTENANCE

RECYCLABILITY

Make sure that you separate the battery from the device and recycle these items at the designated collection points.

MAINTENANCE ALERT

Check that the dust container, tube or brush are not clogged.

Empty the bowl and clean the filter inside the separator. The filter must be completely dry before being put back in place.

To finish, clean the engine filter. The engine filter must be completely dry before being put back in place.

Turn the vacuum cleaner off and on again.
If this does not resolve the problem, contact an Authorized Service Center

Check that the charger used is the correct one. If this does not resolve the problem, contact an Authorized Service Center

Disconnect and reconnect the battery pack. If this does not resolve the problem, contact an Authorized Service Center.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals