behringer EURORACK GO Mobile 2 x 140 HP Eurorack Case with Massive Power Supply User Guide

: August 20, 2024
: Behringer

Table of Contents

Behringer EURORACK GO Mobile 2 x 140 HP Eurorack Case with Massive Power
Important Safety Instructions
Hook-up
Typical Module Installation
Features
Pin Outs
Zones
Module Example
Dimensions
Other important information
FCC INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Behringer EURORACK GO Mobile 2 x 140 HP Eurorack Case with Massive Power

Supply

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install by the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2022 All rights reserved.

LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

WARNING:
Before adding or removing any external Eurorack modules, make sure that the EURORACK GO is turned OFF and the power adapter is unplugged.

Before powering up the EURORACK GO, make sure all modules are secured with the screws provided, to prevent them from falling into the chassis.
When installing modules, make sure they do not touch any of the circuit boards’ electrical components, or the rear chassis. Make sure the module ribbon power cables do not become trapped or crushed.
Use only the supplied power adapter.
In operation, the unit is open, and live voltages are present. Do not touch any of the internal exposed electronic parts, circuit boards, or connectors. Do not use it in the presence of water or liquids.
Failure to follow instructions may lead to permanent injury or serious damage to the internal components and any connected Eurorack modules.

Hook-up

Typical Module Installation

(Behringer MODEL D synthesizer shown)

WARNING: make sure EURORACK GO is disconnected from its power supply adapter before making connections.

Features

Features

Two bays, each 140HP wide
Connectors PCB
Power Supply PCB
Connectors x32 Supply Power to Install Modules
Study Chasis
Mounting Rails with x96 Captive M3 Nuts

Features

Power Switch
DC Input
Handle
Feet
Tilt Stand
Feet

Pin Outs

GATE
GROUND
16 POLES, 2 ROWS, PITCH 2.54 mm
LOOKING INTO CONNECTOR

Zones

+ 12 VDC Supply
CAUTION: Do not exceed 1 A for each Zone, AB or C
+ 5 VDC Supply
CAUTION: Do not exceed 1 A total (Zones A+B+C)
-12 VDC Supply
CAUTION: Do not exceed 1 A total (Zones A+B+C)

Module Example

Behringer MODEL D

WARNING: Make sure the EURORACK GO is disconnected from its power supply adapter before making any connections

(not connected to MODEL D)
Connect End P1 to connector X23 on the MODEL D PCB
Connect End P2 to any connector on the EURORACK GO
CAUTION: Due to the power requirements of MODEL D, do not connect any other modules to the same zone (A, B, or C) on the EURORACK GO

Dimensions

Maximum Depth of Modules that can be inserted

CAUTION: The maximum depth of the module that can be inserted anywhere in the rear section is 40 mm [1.57″]
CAUTION: The maximum depth of the module that can be inserted in the front section varies according to the location shown]

Other important information

Important information

Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC INFORMATION

Responsible Party Name : Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com

FCC STATEMENT

EURORACK GO
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product complies with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.