T and G BASS-33 Ultra Bass Bluetooth Speakers User Manual
- August 19, 2024
- T and G
Table of Contents
T and G BASS-33 Ultra Bass Bluetooth Speakers
Specifications
- Compliance: Part 15 of FCC Rules
- Interference Conditions: Must not cause harmful interference, must accept any interference received
Product Usage Instructions
Compliance with FCC Rules:
Ensure that the device is used in compliance with Part 15 of the FCC Rules
to prevent any harmful interference.
Handling Interference:
Be aware that the device must accept any interference received, including
interference that may cause undesired operation. Keep the device away from
sources of interference for optimal performance.
Modifications:
Do not make any changes or modifications to the device that are not
expressly approved by the responsible party for compliance. Unauthorized
modifications could void the user’s authority to operate the equipment.
PRODUCT SPECIFICATIONS
- Wireless: V5.3
- Support: L2CAP/A2DP/AVCTP, can receive an AUDIO signal and control the AUDIO device. Support HSP/HFP(Handsfree profile), with HANDS-FREE functions.
- Working distance: 10M
- SNR: ≥90db Battery: 3.7V about 4500mAh
- Normal volume playing time : about 4 hours with LED light off
- Speaker driver : ¢101.6MM *2
- peaker Power: 40/20W*2
- Frequency response :120Hz-20KHz
- Unit size : 351.8145.7182.3mm
- Unit weight : about 2195 g (not including accessories)
- Charging: 5V/2000mAh
- Charging time: about 4.5H
PRODUCT FEATURE
- International advanced wireless chip and circuit design techniques, support wireless devices.
- With the FM function, one can search radio station broadcasts automatically
- With a Hi-Fi speaker, to make sure a clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
- It will close automatically after 30 mins if disconnected Wireless & torchlight not working
- A variety of flashing LED lights with different colors, and color lights flash follow the melody.
- Support TWS.
KEY AND SLOT FUNCTION
- DC 5V slot : Use the standard USB TYPE-C charging cable for power charging.
- TF slot : It can decode and play MP3 format audio when put TF card into the slot.
- USB slot : It can decode and play MP3 format audio when the USB card into the slot.
- AUX line in the slot : Use the Mini 3.5 head input through outside devices.
- Power switch: Press long for power on / power off.
- When playing music, (USB card/TF card/Wireless/line in), short press for “play/pause”
- In FM mode, press short to search station automatically, and press again to stop searching.
- Under wireless mode with mobile paired, when a call comes, press short to answer a call hands-free, press again to hand and and press twice to ring up a call.
- When playing music, Press short for the last song, long press to turn down the volume.
- When playing music, press short for the next song, and long press to turn up the volume.
- LED switch: press short for the option of the LED flashing light, press long to close/open the LED light, and short press again to turn the LED light.
- When playing music, short press to switch the model (USB card/TF card /Wireless/line in/FM).
TWS : Keep the two speakers under Wireless mode without pairing, press the “M” key for 2-3 seconds on either of the speakers until hear a hint, and in the meantime,ime the button light stops flashing, now it is TWS mode, then can paire the mobile.
NOTE:
- In the FM mode, put in a micro charging cable or AUX cable to increase the FM radio signal; the LED flashling light will close auto switching to the FM model.
- If this speaker crashes during use, you can press and hold the power button for 8 seconds to reset and shut down.
- USB/TF card pls use FAT32 format.
FCC
Warning 6tatement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation
CAUTION: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the eceiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequently Asked Questions
- Q: What should I do if the device is causing interference?
- A: If you notice the device causing interference, try repositioning it away from other electronic devices or sources of interference. Ensure it is operating within FCC guidelines.
- Q: Can I modify the device for better performance?
- A: No, any modifications to the device must be approved by the responsible party for compliance to ensure it continues to meet FCC regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>