Kenmore 1-877-531-7321 Bagged Canister Vacuum Cleaner User Guide

Kenmore 1-877-531-7321 Bagged

Canister Vacuum Cleaner

877-531-7321-Bagged-Canister-Vacuum-Cleaner-PRODUCT.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-PRODUCT" width="580" height="589" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-PRODUCT.png 559w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-PRODUCT-541x550.png 541w" sizes="(max-width: 580px) 100vw, 580px" />

Pet-Friendly POP-N-GO® Bagged Canister Vacuum Cleaner with Hair Eliminator® Brushroll

• Model/BC4030 Rev.01
• Vacuum Cleaner Help Line: 1-877-531-7321 (US) / 1-844-608-3081 (CA) 8:00 am – 5:00 pm EST, M-F
• www.kenmorefloorcare.com

BEFORE USING YOUR NEW VACUUM CLEANER

Read this Use & Care Guide. It will help you assemble and operate your new Kenmore vacuum cleaner most safely and effectively. For more information about vacuum cleaner care and operation, call the Vacuum Cleaner Help Line at 1-877-531-7321 (US) / 1-844-608-3081 (CA). You will need the complete model and serial numbers when requesting information. Your vacuum cleaner’s model and serial numbers are located on the Model and Serial Number Plate. Use the space below to record the model number and serial number of your new Kenmore vacuum cleaner.

• Model No
• Serial No.
• Date of Purchase

Keep this book and your sales check (receipt) in a safe place for future reference.

PACKING LIST

Your KENMORE BAGGED CANISTER VACUUM CLEANER is packaged with the following parts and components included separately in the carton:

• 1 Canister Vacuum Cleaner (with Floor Brush, Dusting Brush, Pet PowerMate™, and Crevice Tool)
• 1 Handle & Hose Assembly
• 1 Telescoping Wand
• 1 Motorized Nozzle with Hair Eliminator®
• 1 Dust Bag (Pre-installed)
• 1 Use & Care Guide

IMPORTANT SAFETY INSTRUCTIONS

Read all the instructions in this guide before assembling or using your vacuum cleaner.

WARNING!
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons, or damage when using your vacuum cleaner, follow basic safety precautions including the following:

• Use your vacuum cleaner only as described in this Use & Care Guide. Use only the manufacturer’s recommended attachments.

• Disconnect the electrical supply before servicing or cleaning out the brushroll area. Failure to do so could result in the brushroll unexpectedly starting, causing personal injury from moving parts.

• Do not leave the vacuum cleaner when plugged in. Unplug from the outlet when not in
  use and before performing maintenance.

• To reduce the risk of electrical shock – Do not use it outdoors or on wet surfaces.

• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.

• Do not use a damaged cord or plug. If the vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, immediately discontinue use and call 1-877-531-7321 (US) / 1-844-608-3081 (CA) for assistance.

• Do not pull or carry by cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the vacuum cleaner over the cord. Keep the cord away from heated surfaces.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

• Do not handle the plug or vacuum cleaner with wet hands.

• Do not put any objects into openings.

• Do not use any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not put on chairs, tables, etc. Keep on the floor.

• Do not use a vacuum cleaner to pick up flammable or combustible liquids (gasoline, cleaning fluid, perfumes, etc.), or use them in areas where they may be present. The fumes from these substances can create a fire hazard or explosion.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use a vacuum cleaner without a dust bag and/or filters in place.

• Always change the dust bag after vacuuming carpet cleaners or fresheners, powders, and fine dust. These products clog the bag, reduce airflow, and can cause the bag to burst. Failure to change the bag could cause permanent damage to the vacuum cleaner.

• Do not use the vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc. They may damage the vacuum cleaner.

• Do not operate the vacuum cleaner without the exhaust filter or filter door in place.

• The hose contains electrical wires. Do not use it when damaged, cut, or punctured. Replace the hose if cut or worn. Do not pick up sharp objects.

• Always turn off and unplug the vacuum cleaner before connecting or disconnecting either the hose, wand Pet PowerMate™, or motorized nozzle.

• Hold the ug when rewinding onto the cord reel. Do not allow the plug to whip when rewinding.

• You are responsible for making sure that your vacuum cleaner is not used by anyone unable to operate it properly.

SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibility. Your vacuum cleaner is intended for Household Use. Read this Use & Care Guide carefully for important use and safety information. This guide contains safety statements under warning and caution symbols.

VACUUM CLEANER WARRANTY

LIMITED WARRANTY
FOR ONE YEAR from the date of sale (or, for deliveries in the State of California, one year from the date of delivery), this product is warranted against defects in material or workmanship. WITH PROOF OF SALE a defective product will be replaced free of charge. The Kenmore brand is used under license. Direct all claims for warranty service to 1-877-531-7321 (US) / 1-844-608-3081 (CA). This warranty does not cover filters or belts, which are expendable parts that can wear out from normal use within the warranty period. This warranty is void if this product is ever used for anything other than private household purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Cleva North America, Inc., Greenville SC 29607

PARTS AND FEATURES

It is important to know your vacuum cleaner’s parts and features to ensure its proper and safe use. Review these before using your vacuum cleaner. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-1.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-1" width="457" height="503" />

REPLACEMENT PARTS

To order a replacement part, call 1-877-531-7321 (US) / 1-844-608-3081 (CA).

CANISTER

877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-2.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-2" width="754" height="451" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-2.png 754w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-2-550x329.png 550w" sizes="(max-width: 754px) 100vw, 754px" />

ATTACHMENTS

877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-3.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-3" width="727" height="438" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-3.png 727w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-3-550x331.png 550w" sizes="(max-width: 727px) 100vw, 727px" />

HANDLE & HOSE ASSEMBLY 877-531-7321-Bagged-Canister-Vacuum-Cleaner- FIG-4.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-4" width="396" height="460" />

TELESCOPING WAND

877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-5.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-5" width="347" height="468" />

MOTORIZED NOZZLE

877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-6.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-6" width="645" height="402" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-6.png 645w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-6-550x343.png 550w" sizes="(max-width: 645px) 100vw, 645px" />

Please pay special attention to these hazard alert boxes, and follow any instructions given. WARNING statements alert you to such hazards as fire, electric shock, burns, and personal injury. CAUTION statements alert you to such hazards as personal injury and/or property damage.

ASSEMBLY INSTRUCTIONS

Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to verify that you have received all the components of your new Kenmore Bagged Canister Vacuum Cleaner.

WARNING
Electrical Shock Hazard DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.

MOTORIZED NOZZLE
Align the wand and insert it onto the motorized nozzle until the wand locks into place. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-7.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-7" width="191" height="271" />

HANDLE ASSEMBLY
Insert the wand into the handle until the lock button snaps in place. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-8.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-8" width="374" height="319" />

• To remove: Press the wand release button and pull up on the handle.
• To store : Disconnect the hose from the wand and canister to prevent stress on the hose during storage. Store the hose in a loosely coiled position so the hose covering is not stressed.

WAND (TELESCOPING)
The wand’s length is adjustable and requires no assembly. To adjust, simply push the wand to adjust the button and slide the upper wand to the desired height. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-9.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-9" width="287" height="305" />

NOTE: When adjusting the wand length you may have to hold the motorized nozzle with your hand or foot.

HOSE
Line up the hose latch tab and notch in the canister hood and insert the hose into the canister until it snaps into place. 877-531-7321-Bagged-Canister- Vacuum-Cleaner-FIG-10.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-10" width="369" height="320" />

ASSEMBLY INSTRUCTIONS

IMPORTANT:
Push the hose connector firmly into the canister body until the hose latch tab snaps into place. The vacuum cleaner will not operate until the hose is fully connected.

To remove: Do not open the hood before removing the hose. With the hood closed, press the hose latch tab and remove the hose.

CANISTER

1. Open the canister hood.
2. Check to see that the dust bag is properly installed. See DUST BAG CHANGING (pages 20-21) for instructions.
3. Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CLEANING (page 22) for instructions.

OPERATING INSTRUCTIONS

CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT touch the brushroll when the vacuum cleaner is on. Contacting the brushroll while it is rotating can cut, bruise, or cause other injuries. Always turn off and unplug from electrical outlet before servicing. Use caution when operating near children. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-11.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-11" width="281" height="276" />

HOW TO START

WARNING
Personal Injury and Product Damage Hazard

• ALWAYS turn off the vacuum cleaner before unplugging it.
• The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury.
• DO NOT use outlets above counters. Damage from the road to items in the surrounding area could occur.
• When any abnormality/failure occurs, stop using the product immediately and disconnect the power plug.

NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

HOW TO START

WARNING
Personal Injury and Product Damage Hazard

• DO NOT run over the power cord with a motorized nozzle. Personal injury or product damage could result.
• DO NOT pull the plug from the wall by the power cord. If there is damage to the cord or plug, personal injury or property damage could result.

1. Pull the cord out of the canister to the desired length. The cord will not rewind until the cord rewind button is pushed. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-12.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-12" width="436" height="345" />
2. Plug the polarized power cord into a 120-volt outlet located near the floor. To rewind: Turn off and unplug the vacuum cleaner. Hold the plug while rewinding to prevent damage or injury from the moving cord. Push the cord rewind button. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-13.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-13" width="429" height="334" />
3. Release the handle by placing a foot on the nozzle and pulling it back to change the handle position. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-14.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-14" width="323" height="336" />
4. Select a position on the handle 3-way On/Off switch.
   • 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-15.png" alt="" width="75" height="47" />Turn the vacuum cleaner off.
   • 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-16.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-16" width="150" height="44" />Turns on the canister motor only, and the brushroll will not spin.
   • 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-17.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-17" width="112" height="45" />Turns on both the canister and the motorized nozzle motors, and the brushroll will start to spin. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-18.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-18" width="194" height="393" />

CAUTION
DO NOT leave the motorized nozzle running in one spot for any length of time. Carpet damage may occur.

CAUTION
Product Damage Hazard Use care if the motorized nozzle and wand are left in the upright position as they may tip over easily. Property damage can occur if tipped.

VACUUMING TIPS

FOR BEST CLEANING RESULTS

• Slide the electronic suction control forward to increase suction for upholstery and carpets.
• Slide the electronic suction control back to decrease suction for lightweight rugs or drapes. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-19.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-19" width="170" height="211" />
• Keep the airflow passage open. Check each assembly area in REMOVING CLOGS (pages 19-20) occasionally for clogs.

WARNING
Turn off and unplug the vacuum cleaner from the outlet before checking for clogs.

STAIRS

WARNING
Personal Injury Hazard Use care if the canister is placed on the stairs. It may fall, causing personal injury or property damage.

CAUTION
Product Damage Hazard Do not pull on the hose to move the canister from one stair to the next. When finished cleaning in one area use the handle grip on the canister to move the vacuum cleaner to a new location for further cleaning. The stair grip located on the lower body of the canister will aid in preventing the canister from slipping when used on stairs. 877-531-7321 -Bagged-Canister-Vacuum-Cleaner-FIG-20.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-20" width="389" height="268" />

NOTE: Be sure the stair grip has engaged a step and that the canister is balanced securely on the stairs before starting to vacuum.

SUGGESTED SWEEPING PATTERN
For the best cleaning action, the motorized nozzle should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the motorized nozzle should be changed to point to the next section to be cleaned. This pattern should be continued across the carpet with slow, gliding motions.

NOTE:
Fast, jerky strokes do not provide complete cleaning. 877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-21.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-21" width="370" height="277" />

VACUUMING TIPS

EDGE CLEANER
Active brush edge cleaners are on both sides of the motorized nozzle. Guide either side of the motorized nozzle along baseboards or next to furniture to help remove dirt trapped at carpet edges. 877-531-7321-Bagged-Canister-Vacuum- Cleaner-FIG-22.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-22" width="278" height="197" />

MOTORIZED NOZZLE STORAGE
The wand has a U-shaped storage hook that slides into the U-shaped slot on the canister. The storage hook allows the wand and motorized nozzle to be stored with the canister to conserve storage space. The canister must be stored on end for this feature to be used.
To attach the motorized nozzle, it must be in the flat position. The wand will slip out of the slot as it is lifted for use and will slide into the slot as it is lowered for storage. 877-531-7321-Bagged-Canister-Vacuum-Cleaner- FIG-23.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-23" width="564" height="350" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-23.png 564w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-23-550x341.png 550w" sizes="(max-width: 564px) 100vw, 564px" />

ATTACHMENTS

CAUTION
DO NOT attach or remove handles or wands while the vacuum cleaner is ON. This could cause sparking and damage to the electrical contacts or electronic controls.

ATTACHMENT STORAGE
This canister is equipped with an onboard storage area for attachments.

POP-N-GO® FLOOR BRUSH

1. Press the release button to open the tool storage cover. The neck of the floor brush will pop up at an angle that makes it easy to attach the wand. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-24.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-24" width="551" height="381" />
   ATTACHMENTS

2. Push the wand collar over the floor brush neck. Tilt wanthe d upward and lift out. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-25.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-25" width="494" height="274" />

NOTE: If there is difficulty attaching the brush to the wand in the manner described above, simply remove the brush from the storage compartment and insert it into the wand collar.

TO REINSTALL

1. With the floor brush on the wand, insert the floor brush into place.
2. Tilt the wand and floor brush downward. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-26.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-26" width="361" height="303" />
3. Pull the wand away from the floor brush. The floor brush will disconnect from the wand. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-27.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-27" width="387" height="298" />
4. Close the tool storage cover securely. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-28.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-28" width="491" height="334" />

NOTE: If there is difficulty detaching the wand from the brush in the manner described above, simply press the Tool Release button to disconnect the bathers from within.

DUSTING BRUSH, CREVICE TOOL, & PET POWERMATETM

1. Lift the tool storage cover to open. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-29.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-29" width="461" height="378" />
2. Remove attachment as needed. See ATTACHMENT USE TABLE (page 16). 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-30.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-30" width="576" height="360" srcset="https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-30.png 576w, https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-30-550x344.png 550w" sizes="(max-width: 576px) 100vw, 576px" />

TO REINSTALL:
Insert the attachment, press down into place, and close the tool storage cover securely. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-31.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-31" width="420" height="287" />

ATTACHMENTS ON HANDLE

NOTE: If the motorized nozzle is attached, turn the vacuum cleaner off before removing the handle from the wand.

1. Press the wand release button and pull up on the handle. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-32.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-32" width="294" height="338" />
2. Slide attachments into the handle as needed. All except the crevice tool will click into place. See ATTACHMENT USE TABLE (page 16). 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-33.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-33" width="574" height="368" srcset="https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-33.png 574w, https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-33-550x353.png 550w" sizes="(max-width: 574px) 100vw, 574px" />

NOTE: To remove Pet PowerMateTM, dusting brush, and/ or floor brush, press the Wand Release button and slide out.

ATTACHMENTS ON WAND

1. To remove the wand from the motorized nozzle, lock the wand in an upright position.
2. Press the wand release pedal with your foot and pull the wand straight up and out of the motorized nozzle. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-34.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-34" width="424" height="377" />
3. Slide attachments into the wand as needed. All except the crevice tool will click into place. See ATTACHMENT USE TABLE (page 16). 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-35.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-35" width="548" height="380" />

NOTE: To remove Pet PowerMateTM, dusting brush, and/or floor brush, press the tool release button and slide out.

ATTACHMENT USE TABLE

877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-36.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-36" width="1099" height="482" srcset="https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-36.png 1302w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-36-550x241.png 550w, https://manuals.plus /wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-36-1024x449.png 1024w, https://manuals.plus/wp- content/uploads/2024/08/Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-36-768x337.png 768w" sizes="(max-width: 1099px) 100vw, 1099px" />

1. Always clean attachments before using them on fabrics.
2. The 3-way On/Off switch should be in the HARDFLOOR position.
3. Pet PowerMateTM attachment instructions are included with the product.

WARNING
NEVER use the Pet PowerMateTM directly on pets, as it may cause injury. The Pet PowerMateTM is only designed to vacuum pet hair that is shed on stairs or furniture.

PERFORMANCE/SAFETY FEATURES

WARNING
Personal Injury Hazard To avoid accidental brushroll starting, always turn off and unplug the vacuum cleaner before cleaning the brushroll area. Failure to do so can result in personal injury.

HAIR ELIMINATOR® BRUSHROLL
For best performance, the motorized nozzle is equipped with a hair eliminator® brushroll, which prevents the build-up of hair, string, and other debris on the brushroll. To remove any hair wrapped around the brushroll, simply continue vacuuming, allowing the brushroll to automatically remove the hair wrap and send it to the dust bag. 877-531-7321-Bagged-Canister-Vacuum-Cleaner- FIG-37.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-37" width="416" height="318" />

CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT touch the brushroll when the vacuum is on. Contacting the brushroll while it is rotating can cut, bruise, or cause other injuries.

BRUSHROLL RESET
The brushroll has built-in protection against motor damage should the brushroll jam. If the brushroll slows down or stops, the brushroll overload protector shuts off the brushroll motor and the brushroll status indicator emits a red light. The vacuum cleaner’s suction motor will continue to run. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-38.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-38" width="550" height="304" />

To correct the problem: Turn off and unplug the vacuum cleaner, remove the obstruction, and then turn on the vacuum cleaner again. The brushroll status indicator will be off.

NOTE: Once the brushroll motor shuts down, close the ear jam from the brushroll and then restart the vacuum cleaner. If the problem persists, call 1-877-531-7321 (US) / 1-844-608-3081 (CA) for assistance.

ELECTRONIC SUCTION CONTROL
The electronic suction control allows you to change the power of the vacuum cleaner suction motor. When increasing the suction to the highest power, you will hear a click and the suction control can be locked into this position.

PERFORMANCE/SAFETY FEATURES

Increase suction for upholstery, carpets, and bare floors. Decrease suction for draperies and lightweight rugs. 877-531-7321-Bagged-Canister-Vacuum- Cleaner-FIG-39.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-39" width="242" height="220" />

CHECK BAG INDICATOR
When the vacuum cleaner is running with normal airflow, the light on the check bag indicator is off. The light comes on whenever the airflow becomes blocked. If that occurs, check the disposable dust bag, motor safety filter, and other possible clog locations shown in REMOVING CLOGS (pages 19-20). 877-531-7321 -Bagged-Canister-Vacuum-Cleaner-FIG-40.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-40" width="439" height="258" />

To correct the problem : See “Check bag indicator activates” in TROUBLESHOOTING (page 25).

NOTE: The indicator may activate when using certain attachments due to reduced airflow through the attachment.

THERMAL PROTECTOR
This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating. If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically. This allows the motor to cool to prevent possible damage to the vacuum cleaner. To correct the problem: Turn off and unplug the vacuum cleaner to allow the vacuum cleaner to cool and the thermal protector to reset. Check for and remove clogs, if necessary. Also, check and clean or replace any clogged filters. Wait approximately fifty (50) minutes plug the vacuum cleaner in and turn it back on to see if the motor protector has reset. If the canister motor does not resume operation after the reset procedure described above, call 1-877-531-7321 (US) / 1-844-608-3081 (CA) for assistance.

VACUUM MAINTENANCE AND CARE

Always follow all safety precautions when performing maintenance on the vacuum cleaner.

WARNING
Electrical Shock and Personal Injury Hazard Always turn off and unplug the vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner suddenly starting.

REMOVING CLOGS

The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bag through the airflow passages. The dust bag lets the air pass through, while it traps the dirt.
For best cleaning results, keep the airflow passage open. Check the starred ( 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-41.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-41" width="27" height="30" />) areas occasionally for clogs. Turn off and unplug the vacuum cleaner from the outlet before checking.

TO CHECK FOR CLOGS:

• Check the dust bag and change if full. See DUST BAG CHANGING (page 20-21).
• Check the motor safety filter and exhaust filter and clean or replace them if dirty. See MOTOR SAFETY FILTER CLEANING (page 22) and EXHAUST FILTER CHANGING (pages 22-23).
• Check the motorized nozzle for obstructions in the brushroll area. Carefully remove any obstruction. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-42.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-42" width="810" height="447" srcset="https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-42.png 810w, https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-42-550x304.png 550w, https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-42-768x424.png 768w" sizes="(max-width: 810px) 100vw, 810px" />

If the vacuum cleaner still has poor suction, do the following:

1. Connect the hose to the canister and turn the vacuum cleaner on. Check the end of the hose for suction. If there is good suction on the hose handle, there is no clog in the hose. If the suction is bad, remove any dirt or debris in the hose and handle.
   REMOVING CLOGS

2. Connect the hose handle to the wand. Check the end of the wand for suction. If there is good suction at the end of the wand, there is no clog in the wand. If the suction is bad, remove any dirt or debris in the wand.

3. Check the motorized nozzle swivel. Remove any dirt or debris.

CLEANING EXTERIOR AND ATTACHMENTS

1. Turn off and unplug the vacuum cleaner. DO NOT drip water on a vacuum cleaner.
2. To clean the exterior, or to reduce static electricity and dust build-up, wipe the outer surface with a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry after cleaning.
   CAUTION
   Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks.

DUST BAG CHANGING

For best cleaning results, the dust bag should be changed often. The check bag indicator will come on when the bag needs to be changed or the airflow is blocked.

NOTE: See REPLACEMENT PARTS for part number and purchase details (page 6).

1. Turn off and unplug the vacuum cleaner.

2. Remove the hose from the canister.

3. Pull the hood release out and up, then lift the canister hood. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-43.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-43" width="311" height="274" />

4. Pull the bag out of the bag mount.
   NOTE: The bag mount will flip forward after removing the bag. This will prevent the hood from closing until a new bag is installed. 877-531-7321 -Bagged-Canister-Vacuum-Cleaner-FIG-44.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-44" width="518" height="240" />
   DUST BAG CHANGING

5. Check the motor safety filter and clean or if necessary replace it. See MOTOR SAFETY FILTER CLEANING (page 22). 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-45.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-45" width="566" height="303" srcset="https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-45.png 566w, https://manuals.plus/wp-content/uploads/2024/08/Kenmore-1-[877-531-7321](https://phone.gd/phone/877-531-7321)-Bagged-Canister-Vacuum-Cleaner-FIG-45-550x294.png 550w" sizes="(max-width: 566px) 100vw, 566px" />
   NOTE: DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots.

6. Rotate the ag mount down and install the bag into slots per illustration, pushing down until the cardboard tab locks into position and the holes align. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-46.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-46" width="547" height="259" />

7. Tuck the bag securely into the bag cavity so that none of the will be pinched by the hood.

8. Close and latch the canister the hose into the canister until it snaps in place.

9. Plug cord into wall outlet.

CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full, which may damage the vacuum cleaner motor. Change the bag more often when vacuuming these materials.

MOTOR SAFETY FILTER CLEANING

WARNING
Electrical Shock Hazard Turn off and unplug the vacuum cleaner from the electrical outlet. Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.

MOTOR SAFETY FILTER
Check the motor safety filter occasionally and clean it when dirty.

NOTE: See REPLACEMENT PARTS for part number and purchase details (page 6).

1. Remove the bag as outlined in the DUST BAG CHANGING section.
2. Lift the rubber retainer and pull out the motor safety filter as shown. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-47.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-47" width="493" height="258" />
3. Wash the filter in warm soapy water, rinse, then dry. Do not clean in the dishwasher or install while damp.
4. Slide the filter back into place under the ribs in the bag cavity. Tuck the filter in so that it fits completely under the rubber retainer.
5. Replace the bag as outlined in the DUST BAG CHANGING (pages 20-21) section.

EXHAUST FILTER CHANGING

WARNING
Fire and/or Electrical Shock Hazard Do not operate with a clogged exhaust filter or without the exhaust filter installed. Do not operate without a filter cover installed.

HEPA MEDIA EXHAUST FILTER
The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered evenly. The filter CANNOT be washed as it will lose its dust-trapping ability.

NOTE: See REPLACEMENT PARTS for part number and purchase details.

1. Push the latch up to release the exhaust filter cover from the slot in the canister. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-48.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-48" width="508" height="343" />
   EXHAUST FILTER CHANGING

2. Pull the filter cover outward to remove ifrom t fthecthcanisterer.

3. Remove the exhaust filter cartridge. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-49.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-49" width="420" height="257" />

4. Insert the new exhaust filter cartridge into the canister with the rubber seal towards the canister. The arrow on the top ridge of the filter indicates the direction of airflow. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-50.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-50" width="392" height="221" />

5. To replace the exhaust filter cover, place the two tabs on the filter cover into the canister. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-51.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-51" width="353" height="284" />

6. Rotate the filter cover and lock it into place. 877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-52.png" alt="Kenmore-1-877-531-7321-Bagged-Canister-Vacuum-Cleaner-FIG-52" width="381" height="305" />

PET POWERMATE™ CLEANING

WARNING
Always unplug the power cord from an electrical outlet before performing maintenance on the vacuum cleaner. Cut off any carpet pile and lint entangled around the brushroll with a pair of scissors.

CAUTION
To reduce the risk of injury from moving parts, remove Pet PowerMateTM from the vacuum hose or wand before servicing. 877-531-7321-Bagged-Canister-Vacuum- Cleaner-FIG-53.png" alt="Kenmore-1-877-531-7321-Bagged- Canister-Vacuum-Cleaner-FIG-53" width="361" height="283" />

TROUBLESHOOTING

Review this table to find do-it-yourself solutions for minor performance problems. Any service needed, other than maintenance described in this Use & Care Guide, should be performed by a qualified service agent.

WARNING
Always turn off and unplug the vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury.

The vacuum cleaner won’t start.

| Unplugged at the wall outlet.| Plug in firmly, and press the  On/Off switch.
Tripped circuit breaker/ blown fuse at the household service panel.| Reset the circuit breaker or replace the fuse.
Loose hose electrical connections.| Reconnect hose ends.

Poor job of dirt pick-up.

| Full or clogged dust bag.| Check for clogs and/or change the bag if necessary.
Clogged airflow passages.| Clear airflow passages.
Dirty filters.| Clean/change filters.
The wrong   power level was selected.| Adjust control.
Hole in hose.| Replace hose.
The brushroll is worn.| Call 1-877-531-7321 (US) /

1-844-608-3081 (CA) for assistance.

The canister   hood is  open.| Close and latch the hood.
The vacuum cleaner starts but shuts off.| Hose or hood electrical connections.| Check connections, and reconnect hose ends.
Tripped thermal protector in the canister.| See THERMAL PROTECTOR

(page 18).

The brushroll does not turn.

| Motorized nozzle connections unplugged.| Plug in firmly.
The brushroll is jammed.| Remove obstruction. Follow the instructions on page 17.
The thermal protector in the motorized nozzle is activated.| ****

Clear all clogs or change the bag.

Vacuum cleaner in HARD FLOOR mode.| Press the CARPET button to activate the brushroll.

Check bag Indicator activates.

| Full or clogged dust bag.| Change bag.
---|---|---
Dirty filters.| Clean/change filters.
Blocked airflow passage.| Clear blockage from airflow

passage.

Certain attachment tools.| This is normal. The light should go off when the tool is removed.
Vacuum cleaner picks up moveable rugs, or the motorized nozzle pushes too hard.| ****

The suction tion is  too strong.

| ****

Select lower Power Level.

The cord won’t rewind.| Dirty power cord.| Clean the power cord.
Cord jammed.| Pull out the cord and rewind.
Vacuum cleaner leaves marks on the carpet.| ****

Wrong vacuuming pattern.

| ****

See VACUUMING TIPS (page 12).

Kenmore and the Kenmore logo are registered trademarks of Transform SR Brands LLC and are used under license by Cleva North America, Inc., Greenville, SC 29607

References

• Kenmore Floor Care | Home Cleaning Solutions & Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>