CrossWave® Cordless Max cleaning the dirty water tank | Support

Dirty Water Tank, Filter, & Float Indicator Maintenance

Note: If orange dirty water tank indication light is illuminated, but the dirty water tank is not full, follow the steps below:

• Turn off machine and remove from docking station

• Remove dirty water tank by pressing down on recessed button on top of tank

• Grasp top of tank from sides and pull up to remove

• Remove filter by grasping sides and pulling up

• Hand wash filter & screen with warm water, remove debris

• Clean float sensors on the bottom of the dirty water tank lid with a damp cloth or napkin

  • Remove all visible debris and let completely dry in order for the sensors to work

•  Wipe gold sensors on top of dirty water tank lid below the filter with a dry tissue

• Wipe gold dirty water tank connection spot on machine with a tissue or soft cloth

• Remove strainer from tank, discard debris & rinse

• Rinse entire tank   

• Filter should be completely dry before reassembling

  • Once dry, insert filter making sure edges are smooth and not folded over

• Place top piece including screen, and filter back into dirty water tank

• Angle tank back into body of machine with bottom edge first – push tank in until it clicks into place

  • Tank should not be loose and there should be no gaps

• If orange dirty water tank is full light continues to be illuminated after the dirty water tank and sensors have been cleaned, please Contact Us

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>